• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.40-47
• /
• 1995

A system for measurement of ultrasonic velocity, attenuation and complex modulus of materials by using the spectral analysis method of pulses has been constructed and its performances are estimated. The system has a mechanical scanning part of an acoustic microscope with a ZnO plane wave transducer of the resonant frequency of 85MHz. Ultrasonic velocity has been obtained by the intervals of maxima (or minima) on the power spectrum of a pulse train reflected from the surface and bottom of a specimen, and attenuation has been obtained by the power spectra of three pulses reflected from the surface and the bottom of a specimen and the surface of a standard specimen. The measured results for materials such as fused quartz, polyester show that the system has very high accuracy.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2291-2292
• /
• 2008

HVDC(High Voltage Direct Current) 송전 시스템은 세계 각국에서 경쟁적으로 개발하고 있으며 계통에의 연계가 점점 증가하고 있다. 전형적인 HVDC 송전 시스템에서는 낮은 고조파 함유율과 높은 전압율 등의 이유로 주로 12-펄스 사이리스터 정류기가 사용된다. 본 논문에서는 12-펄스 정류기를 EMTP(ElectroMagnetic Transient Program)를 이용하여 모델링 하였으며, 고조파 분석을 통하여 모델링의 적절성을 검증하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.238-239
• /
• 2001

sub-30fs 펄스폭의 상용 Ti：sapphire 레이저시스템에 대한 펄스압축기 및 2차 조화파 발생기를 제작하여 특성을 평가하였다. 그림la에서 82MHz의 주파수로 모드록되는 상용 Ti：sapphire 레이저 (Spectra-Physics Millennia/Tsunami laser)의 출력이 반사경 Ml, M2를 거쳐 펄스압축기에 입사되고 압축되어 나온 펄스가 다시 M6, M7를 거쳐 2차 조화파발생기로 입사되는 2단구조로 설계되었다. 압축기에 입사되기전 평균파워는 파장 800nm에서 520mW로 측정되었으며, 측정된 스펙트럼 반치폭 47nm에 (그림 2a)에 대해 chirp-free sech$^2$t 펄스로 가정할 경우 본 레이저시스템의 변환한계 펄스폭은 14.5fs로 계산된다. (중략)

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.304-309
• /
• 1999

In this paper, a new 24longleftarrowpulse diode rectifier system based upon the conventional series-connected 12-pulse rectifier is p proposed with the least number of switching devices and low VA rating of the additional passive components. The p proposed approach does not employ any active switching devices. Therefore, the system is rugged and simple to i implement. Detailed analysis with VA rating calculation of the components is presented and experimental results from a a 220V, 3kV A rectifier system verify the proposed concept.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.66-70
• /
• 2013

The input current of three phase rectifier which is mainly used in the propulsion system of the electric propulsion ship includes a variety of low order harmonics. To reduce these harmonics, the power conversion system, used in the large vessels which high power is required, is currently used the rectifiers of 12-pulse output, but it still has a problem that occurs $12{\pm}1$ harmonics. Also, in the case of the direct torque control technique which is widely used for the speed and torque control, the torque ripple is severe and the input current of motor has greatly included harmonics by the switching of the inverter. In order to reduce harmonics and improve the performance of torque control, this paper presents that the auxiliary supply assisted into the 12-pulse rectifier of the electric propulsion system using direct torque control technique. We confirm the validity of the proposed method through the simulation under the environment of a real vessel system.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1785-1787
• /
• 2002

폐수에서 발생하는 슬러지(Sluge)의 효과적인 처리를 위한 전기적 충격파를 발생시키는 장치로 고전압 펄스 전원 시스템을 제작하였다. 제작한 고전압 펄스 전원 시스템의 제원은 최대 출력 전압 60 kV, 최대 반복 주파수 500 Hz 이며, 한 펄스 당 최대 출력 에너지는 20 J 이다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.5
• /
• pp.67-73
• /
• 1997

인버터의 출력파형에 포함되는 고조파를 저감하기 위하여 소프트웨어에 의하여 W형태와 M형태의 펄스 폭변조 신호로 구동되는 3상 5레벨 PWM인버터를 구현하였고, 인버터의 출력전압의 종합 고조파 왜율은 비교 분석하였다. 제안한 M형 펄스 폭 변조 제어에 의하면 PWM 인버터의 종합 고조파가 크게 낮출 수 있어 인버터 응용 시스템의 성능을 향상시킬 수 있다. W형 및 M형의 펄스 폭 변조제어 3상 5레벨 PWM 인버터를 구현하여 인버터 출력전압의 종합 고조파 왜율을 5〔%〕이하로 유지됨을 입증하였다.

• The Journal of the Korea Contents Association
• /
• v.8 no.4
• /
• pp.63-70
• /
• 2008

This paper presents a method of PRI do-interleaving for LASER pulse signals. When the PRI of LASER pulse is periodically changed, the first deviation and the second deviation of TOA is used to calculate the PRI pattern of input LASER signals of receiver. If the standard deviation of the first difference of TOA is less than 5% of the average of the first difference of TOA, the PRI pattern of LASER signal is fixed or jittered type. If the standard deviation is larger than 5% of the average, those are triangular PRI patterns or sawtooth PRI patterns.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.462-466
• /
• 2002

This paper describes a low frequency electrical nerve stimulator for muscle care. The developed system consist of 8bit low power consumed MPU, voltage boosting circuit converting 9V input to 120V output, repairing circuit for distorted output pulse, LED and buttons for I/O, and electro-chemical pad. The pulse generation algorithm for the muscle care effect is developed with basic pulses such as a single phase rectangle pulse, symmetric rectangle pulse, and depolarized interrupt pulse.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.916-922
• /
• 2014

Diode rectifiers have been widely used for an AC to DC converter. But a big problem is that they include large harmonics components in the input currents. A 12-pulse configuration with phase shifting transformer is useful for reducing them. however, it still includes the ($12{\pm}1$)th (m; integer) harmonics in the input currents. In this paper, we propose a single-phase square wave auxiliary voltage supply which is inserted in the middle DC bus. It reduces harmonics especially the 11th and 13th and the harmonic characteristic becomes almost equivalent to a 24-pulse rectifier. Theoretical analysis of the combined 12-pulse diode rectifier with the auxiliary supply is presented and a control method of the auxiliary supply is proposed. The reduction in the input current harmonics is verified by simulation using software PSIM.