• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.1
• /
• pp.1-8
• /
• 1979

This paper describes a simple asynchronous time dime division multiplexing system developed by means of a synchronous delta modulation. In realizing asynchronous multlplexlng system time author deals with a technique of multiplexing communication channels by reversing the polarity of output pulse and superimposing the channels at a certain time Interval. The results of experiments on the number of error pulses, signal-to-noise ratio and frequency characteristics have shown fair agreements with the theoretically predicted ones related to the system.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.62-64
• /
• 2008

본 연구에서는 펄스다중화 보조회로론 이용한 18-step Back-to-Back 전압원 컨버터를 제안한다. 제안하는 Back--Back 전압원 컨버터는 교류연계점에서 유 무효전력의 독립적인 제어가 가능하다. 펄스수를 증가시키는 방법은 이론적인 접근을 통해 분석하였으며, 제안하는 시스템의 동작은 PSCAD/EMTDC 소프트웨어로 시뮬레이션 모델을 개발하여 확인하였고 실질적인 성능검증은 하드웨어 축소모형을 제작하고 실험을 통해 실시 하였다.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.31-35
• /
• 2004

This paper proposes a new configuration of 36-pulse voltage source converter which consists of two 6-pulse bridges and a pulse-interleaving auxiliary circuit. The system topology of proposed converter was derived to increase the pulse number of converter output voltage without increasing the number of 6-pulse bridges. The gate pulse generation was analyzed using the theoretical approach of multi-pulse switching converter. The operational feasibility of proposed system was verified by computer simulations with PSCAD/TMTDC software and experimental works with 3kVA hardware prototype. The proposed converter can be widely used for the uninterruptible power supply, the power quality compensator, and the distributed power generation, such as solar and fuel fell power system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1117-1122
• /
• 2005

This paper is studied the high-repetition rate optical-pulse stream generation using optical loop mirror coupler. With the recent development of the ultrahigh-speed optical time division multiplexed system, hish-repetition rate optical-pulse stream generation is necessary. This is different from conventional approaches, which use fiber or integrated waveguide delay line circuits. The high-repetition-rate optical-pulse multiplication phenomenon occurs when the optical pulse's spectral width is greater than the transfer bandwidth of the coupler used. From the analysis, the output repetition rate can be controlled by using fiber couplers with different equivalent transfer bandwidths. The pulse separation spacing is controlled by number of cascaded coupler in optical loop mirror coupler scheme.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.201-210
• /
• 2001

Wavelength and repetition-rate tunable optical pulse-trains for ultrafast optical time- and wavelength division multiplexing are generated from a semiconductor fiber ring laser by optical injection mode-locking. The pulse trains show the pulse with of ${\sim}10$ ps and the wavelength tuning of wider than 30 nm at various repetition-rates of 10 GHz, 20 GHz, 30 GHz and 40 GHz, respectively.

• Journal of the Korean Society of Radiology
• /
• v.5 no.4
• /
• pp.161-169
• /
• 2011

This research experimented on the change of the multiple colleague scan angle facing one scan object facet to many directions of the form of 3D about the visual angle nervous system forming the cubic distribution with the gradient magnetic field of the mri system and considered the existing basic angle oblique direction test coverage and comparison. MR system can freely select various pulse sequence and image slice. To oblique imaging for optic nerve viewing, we have studied the variation of scan angle between typical oblique scan method (sagittal-coronal plane) and multi directional angles oblique scan method (sagittal-coronal-axial plane) using gradient of MR system. In this study, the subjects of the experiment were normal adults in our country. As a result, we confirmed that multi directional angles oblique scan method can display anatomical information of more wider area than typical oblique scan method. In addition, to clearly display optic nerve, we also confirmed that image slice thickness and pulse sequence have effect on it.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.256.2-256.2
• /
• 2014

최근 고출력 펄스 스퍼터링, HPPMS (high power pulsed magnetron sputtering)을 개선한 기술이 개발되고 있다. High power impulse magnetron sputtering (HIPIMS)이라고도 불려지는 이 기술은 Kouznetsov1) 에 의해 개발되었으며, 짧은 주기 동안 높은 peak power 밀도를 얻을 수 있기 때문에, 스퍼터링시 높은 이온화율을 만들 수 있다. 스퍼터 된 종들의 높은 이온화는 다양한 분야에서 기존 코팅 물질의 특성 개선 및 self-assisted 이온 증착 공정을 통해 우수한 박막을 제조하는데 기여되고 있다. 그러나 HIPIMS는 순간 전력 밀도가 MW수준으로 높아서 고융점, 고열전도도의 물질에만 적용할 수 있다는 단점을 가지고 있다). 최근에 HIPIMS를 대체하기 위해 modulated pulse POWER (MPP)가 개발되었다. 이것은 스퍼터 된 종들의 이온화율을 높일 수 있음과 동시에 여러 가지 물질에 적용할 수 있다고 보고하고 있다. MPP와 HIPIMS와의 차이점은 HIPIMS는 간단한 하나의 초고출력 펄스를 이용하는 반면에, MPP는 펄스 길이 3 ms 안에서 다양하게 조절이 가능하며, 한 전체 펄스 주기 안에서 다중 세트 펄스와 micro 펄스를 자유롭게 조합하여 인가할 수 있다는 장점이 있다. 본 실험에서는 In2O3 : SnO2의 조성비 10:1 wt% target을 사용하였으며, Ar:O2의 유량비는 10:1의 비율로, 기판의 온도를 올려 주지 않는 상태에서 실험을 하였다. Ar 유량을 40 sccm으로 고정시킨 후 O2의 유량을 2~6 sccm에 대하여 비교를 하였다. 박막의 두께를 100 nm로 이하로 하였을 때 비저항은 $7.6{\times}10-4{\Omega}cm$의 값을, 80% 이상의 투과도와 10 cm2/Vs 이상의 mobility를 얻을 수 있었다. 또한 박막 두께 150 nm로 고정, substrate moving에 따른 ITO 박막의 차이를 알아보았다. 비저항의 값은 $5.6{\times}10-4{\Omega}cm$의 값을, 80% 이상의 투과도와 15 cm2/Vs의 값을 얻었다.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.173-176
• /
• 2007

본 논문에서는 풍속이 가변하는 상황에서 풍력 발전 시스템의 동작을 모의 할 수 있는 풍력 터빈 시뮬레이터를 설계 구현하였다. 실제 풍속과 회전 속도를 실시간으로 입력받으며, 토크 계산에 필요한 블레이드의 효율을 주속비에 관한 함수로 처리하여 사용함으로써 복잡한 조작 없이 가변 풍속조건에서 블레이드에 의한 토크입력을 모의할 수 있게 하였다. 또한 풍력터빈 시뮬레이터를 이용하여 농형 유도발전기식 풍력발전시스템을 구성하여 계통에 연계하였을 경우 발생되는 무효전력을 보상하기 위해 펄스 다중화 보조브리지회로를 이용한 새로운 구조의 36-펄스 전압원 컨버터방식의 실시간 무효전력보상기(STATCOM)를 적용하였다. 그리고 동작특성을 분석하고 제어시스템의 성능해석을 위하여 시뮬레이션 프로그램인 EMTDC/PSCAD를 이용한 시뮬레이션을 실시하였으며, 축소모형 하드웨어 실험을 통해 실험을 통한 분석을 실시하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.7
• /
• pp.13-23
• /
• 2009

In this paper, the network performance of a turbo coded optical code division multiple access (CDMA) system with cross-layer, which is between physical and network layers, concept is analyzed and simulated. We consider physical and MAC layers in a cross-layer concept. An intensity-modulated/direct-detection (IM/DD) optical system employing pulse position modulation (PPM) is considered. In order to increase the system performance, turbo codes composed of parallel concatenated convolutional codes (PCCCs) is utilized. The network performance is evaluated in terms of bit error probability (BEP). From the simulation results, it is demonstrated that turbo coding offers considerable coding gain with reasonable encoding and decoding complexity. Also, it is confirmed that the performance of such an optical CDMA network can be substantially improved by increasing e interleaver length and e number of iterations in e decoding process. The results of this paper can be applied to implement the indoor optical wireless LANs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.8-18
• /
• 2011

Visible light communication (VLC) using optical sources which can be simultaneously utilized for illumination and communication is currently an attractive option for wireless personal area network. Improving the data rate in optical wireless communication system is challenging due to the limited bandwidth of the optical sources. In this paper, we design the singular value decomposition (SVD)-based multiplexing multi-input multi-output (MIMO) system to support two data streams in optical wireless channels. In order to improve the spectral efficiency, the rate adaptation using multi-level pulse amplitude modulation (PAM) is applied according to the channel condition and we propose the method to allocate the optical power, the offset and the size of modulation scheme theoretically under the constraints of the nonnegativity of the modulated signals, the aggregate optical power and the bit error rate (BER) requirement. The simulation results show that the proposed allocation method gives the better performance than the method to allocate the optical power equally for each data stream.