• Journal of Korea Foundry Society
• /
• v.41 no.5
• /
• pp.411-418
• /
• 2021

In order to experimentally investigate the effect of Ni or Cu addition on microstructure and mechanical properties of high Si Solution Strengthened Ferritic Ductile cast Iron (SSF DI), a series of lab-scale sand casting experiment were conducted by changing initial concentration of Ni up to 3.0wt% or Cu up to 0.9wt% in the alloy. It was found that increase in Ni or Cu content in the alloy leads to increase in strength properties and hardness as well as decrease in ductility. The higher Ni or Cu content the SSF DI has, the higher fraction of pearlite was observed. At similar levels of Ni or Cu contents in the alloy, higher pearlite area fraction was observed in the Cu-containing SSF DI than that in the Ni-containing SSF DI. When the effect of the microstructure on the mechanical properties of Ni-containing SSF DI was considered, Ni-containing SSF DI was found to have excellent strength and hardness as well as good elongation when the pearlite fraction was controlled less than 10%. As the pearlite fraction in the Ni-containing SSF DI exceeds 10%, however, it shows drastic decrease in elongation. Meanwhile, gradual increase in strength and hardness, and decrease in elongation with respect to increase in pearlite fraction were observed in Cu-containing SSF DI. The different microstructure-mechanical property relationships between Ni-containing and Cu-containing SSF DI were due to the combined effect of the relatively weak pearlite stabilizing effect of Ni compared to that of Cu in high Si SSF DI, and matrix strengthening effect caused by the different amounts of those alloying elements required for similar pearlite fraction.

• Journal of Bio-Environment Control
• /
• v.11 no.3
• /
• pp.108-114
• /
• 2002

Cellular glass foam (CGE), the reprocessed glass, has a possibility as a component of vegetative propagation media of floricultural crops due to the its excellent air and water permeability, similar to that of perlite. An experiment was conducted to evaluate the rooting and growth thereafter of Kalanchoe blossfeldiana ‘Gold Strike’in media containing various volume ratios of granular rockwool, peat-moss, CGF and perlite. The particle size of CGF and perlite was 2.0~4.0mm and 1.2~4.0mm, respectively. Cuttings were rooted in a fog tunnel with a mean temperature of 18.2$^{\circ}C$ and RH of 66.7％ under a long day regime (14 h per day light period). Height, length of the longest root, stem diameter, no. of leaves, leaf area, percentage of rooted cuttings, shoot and root fresh weights, shoot and root dry weights, total chlorophyll concentration and physicochemical properties were measured. Cuttings rooted 100% in all treatments. Physicochemical properties in CGF and perlite-containing media showed little differences. The growth of rooted plants in the CGF-containing media was similar or rather superior to that in perlite-containing media. Consequently, CGF has a possibility as a vegetative propagation medium of Kalanchoe. To make wider commercial use of CGF, more demonstrative experiments and analyses are necessary.

• Journal of Bio-Environment Control
• /
• v.12 no.2
• /
• pp.83-88
• /
• 2003

The effect of vertical stratification of perlite by particle size on the growth and yield of tomato In a recycling hydroponics was examined. Vertical stratifications were composed of mixed form of small medium and large size (MP), divided forms of small and large size (smal1/1arge, DP I), and medium and large size (medium/large, DP II). Tomatoes showed higher growth in divided form, specially in DP II than DP I. Deformed fruits had higher occurrence by 17.8% in the mixed form than divided forms, while they were not significantly different between mixed forms. Root activity tended to increase during 20 days to 50 days after transplanting (DAT) in all treatments, but showed highest value at 50 DAT in DP II. After harvest electric conductivity and pH of stratified perlite were slightly higher in upper zone of DP I, but were not different in the other treatments. Mineral contents in the medium after harvest were higher in lower zone than the upper zone in MP and DP II, but vice versa in DP I.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.25-31
• /
• 1995

This study was carried out to investigate the effect of the concentration of nutrient solution on the growth of tomato(Lycopersicon esculentum Mill. cv. seokwang) in substrate culture. The substrates used in the experiment were perlite, vermiculite, and peatmoss. Tomato plants were treated with different concentrations of nutrient solution, viz. 0.5, 1.0, 2.0, 3.0, and 5.0mS/cm at seedling stage and transferred to different treatments, 1.0, 2.0, and 3.0mS/cm after transplanting in each substrate. As the concentrations of nutrient solution increased from 0.5 to 3.0mS/cm at seedling stage, the $CO_2$ assimilation rates of seedlings increased in all three substrate culture. Beyond this range, the $CO_2$ assimilation rates of seedlings decreased. By increasing the concentrations of nutrient solution, plant height, leaf length, leaf width, stem diameter, and top dry weight increased in perlite and were high at 2-5mS/cm in vermiculite. On the other hand, in peatmoss, the best result was shown at 3.0mS/cm. Therefore, the adequate concentration of nutrient solution on early growth of seedlings differed among substrates and was shown to be 3.0-5.0mS/cm in perlite, 2.0-5.0mS/cm in vermiculite, and 3.0mS/cm in peatmoss. Generally, as the concentrations of nutrient solution increased from 1.0 to 3.0mS/cm after transplanting, dry weight increased significantly in all three substrate culture. However, dry weights of tomato plants grown under high concentration of 5.0mS/cm slightly increased both at seedling stage and after transplanting.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2A
• /
• pp.129-136
• /
• 2011

Recently studies on functional concrete with a photocatalytic material such as $TiO_2$ have actively been carried out in order to remove air pollutants. The absorbtion of $TiO_2$ from those studies is applied by it being directly mixed into concrete or by suspension coated on the surface. When it comes to the effectiveness, the former process is less than that of the latter compared with the $TiO_2$ use. As a result, the direct coating of $TiO_2$ on materials' surface is more used for effectiveness. The Surface spread of it needs to have a more than $400^{\circ}C$ heat treat done to stimulate the activation and adhesion of photocatalysis. Heat treat consequently leads hydration products in concrete to be dehydrated and shrunk and is the cause of cracking. The study produces $TiO_2$ used Sol-gel method which enables it to be coated with a low temperature treat, applies it to pearlite using Lightweight Aggregate Concrete fixed with a low temperature treat and evaluates the spread performance of it. In addition to this, the size of pearlite is divided into two types: One is 2.5 mm to 5.0 mm and the other is more than 5.0 mm for the benefit of finding out the removal characteristics of $CH_3CHO$ whether they are affected by pearlite size, mixing method and ratio with $TiO_2$ and elapsed time. The result of this experiment shows that although $TiO_2$ produced by Sol-gel method is treated with 120 temperature, it maintains a high spread rate on the XRF(X ray Florescence) quantitative analysis which ranks $TiO_2$ 38 percent, $SiO_2$ 29 percent and CaO 18 percent. In the size of perlite from 2.5 mm to 5.0 mm, the removal characteristic of $CH_3CHO$ from a low temperature heated Lightweight concrete appears 20 percent higher when $TiO_2$ with Sol-gel method is spreaded on the 7 percent of surface. In other words, the removal rate is 94 percent compared with the 72 percent where $TiO_2$ is mixed in 10 percent surface. In more than 5.0 mm sized perlite, the removal rate of $CH_3CHO$, when $TiO_2$ is mixed with 10 percent, is 69 percent, which is similar with that of the previous case. It suggests that the size of pearlite has little effects on the removal rate of $CH_3CHO$. In terms of Elapsed time, the removal characteristic seems apparent at the early stage, where the average removal rate for the first 10 hours takes up 84 percent compared with that of 20 hours.

• Transactions of Materials Processing
• /
• v.12 no.7
• /
• pp.610-614
• /
• 2003

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.346-351
• /
• 2011

This research was done to identify the mass propagation method in winter daphne (Daphne odora Thunb) using its softwood cuttings and to investigate its plant characters established at different light and soil conditions as an indoor plant. Cuttings from winter daphne were taken and grown in different treatment consisted of rooting media (perlite, vermiculite, perlite + vermiculite (1 : 1) and commercial horticulture media soil), indole butyric acid (IBA) hormone concentrations (0, 100, 500, 1000 ppm and Rootone) and date of cutting. Transplants were grown at different light intensities (100, 1000, 2500 lux and control) and growing media. Results showed that cuttings grown in perlite + vermiculite (1 : 1) gave higher percentage (100%) rooting. Cuttings treated with Rootone and IBA 100 ppm showed good rooting growth and cutting taken in June, 25 gave the highest rooting (96.7%). The best plant growth obtained at 1000 lux (56~60 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) followed by 2500 lux (125~130 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and scoria mixed with commercial horticulture media soil showed better growth of transplants.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.228-232
• /
• 2007

We have also clarified the effects of the different substrates; (perlite, peatmoss and granular rock-wool) on the plant growth and the mineral contents of Campanula takesimana until 70 days after transplanting. Overall plant growth in terms of plant height, stem diameter, number of leaves, root length, fresh and dry weight of shoot and root were increased in the order of that mixed perlite and peat moss (50 : 50, v/v)>peat moss (100%)>perlite (100%)>granular rock wool (100%). Mineral contents in plants were much more in the order of potassium $(15.38-43.91cmol^+/kg)$, calcium $(5.48-7.78cmol^+/kg)$, magnesium $(4.38-6.55cmol^+/kg)$ and sodium $(1.25-1.69cmol^+/kg)$. The higher mineral contents of plants were also most made in the mixed substrates of perlite and peat moss (50 : 50, v/v).

• Journal of Bio-Environment Control
• /
• v.9 no.1
• /
• pp.20-26
• /
• 2000

This study aims at analyzing physical and chemical properties of perlite substrate. Particles of substrate were divided into five categories In size: gravel, very-coarse, coarse, medium and fine grade. Particles of very-coarse and greater grades in perlite substrate occupied 98.5％ of total particles. The air phase of total particles was distributed between 76.8％ and 87.7％ with especially showing that of very-coarse grade was lower than that of coarse or smaller one. However, the liquid and solid phases were vice versa. The cation exchange capacity (CEC) measured was highest in the fine grade. In drainage experiments, the water being drained from the substrate increased with the ratio of drain area, and the 65~70％ of total water reduced within five minutes after irrigation. The drained volume was proportional to the depth of the substrate, which contained about 2mL.cm$^2$：by depth (cm). Due to quick reduction of the water in the substrate, the pF value increased in four minutes after irrigation and showed the highest negative correlation ($R^2$＝0.997) with the moisture content of the substrate. The physical and chemical properties including drainage characteristics analyzed in this study can be, therefore, utilized to control the moisture content of perlite substrate, efficiently.

• Journal of Bio-Environment Control
• /
• v.19 no.3
• /
• pp.123-129
• /
• 2010

A study on modeling of medium temperature drops of the elevated-bench hydroponic system for strawberry cultivation during low temperature season was conducted. Four different conditions were used for the experiment. These consisted of two kinds of bed types (plant, V), four kinds of medium (rice, perlite, rice hulls80% and peatmoss20%, perlite80% and peatmoss20%), two kinds of mulched bed (mulched, non mulched) and four kinds of greenhouse air temperature (l.5, 3.2, 5.0, $6.7^{\circ}C$), and the results were summarized as follows: Temperature drop of medium in the V-bed was slower than that in the plant bed, showing better insulation effect of V-bed. Temperature drop of medium with mulching on the top of the bed was slower than the case without mulching, as a result, the beneficial effect of temperature drop was appeared in mulched bed. Linear regression of the temperature descent rate and the temperature difference between medium and air showed significant correlation. The regression equation for the Pearlite80% and Peatmoss20% in the V-bed was f(x) = -0.2656 + 0.1345x at the $R^2$ of 0.9269. Using the model, the temperature drop during night can be predicted for the various media at the different depths.