• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.849-856
• /
• 2020

The Angle-of-Arrival(AOA) information for an array antenna receiver is one of the important factors for estimating the location of specific signals and detecting signals efficiently, in various situations. The AOA estimator in the satellite environment can rapidly calculate the AOA information in the wide area, utilizing a planar (grid, circular) array antenna mounted on the satellite. Since the satellite receiver has the limitation of the array antenna size, the concentric circular (ring) array (CCA or CRA) antenna structure with comparatively small size but with multiple antenna elements is more efficient than the uniform circular array (UCA) structure, for the satellite environment. In this paper, we introduce a cascade AOA estimation algorithm based on CRA, consisting of CAPON and Beamspace MUSIC. In addition, we provide computer simulation examples for verifying the estimation performance of the cascade AOA estimation algorithm based on CRA and compare it to the case of UCA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.812-818
• /
• 2003

This paper presents a developed outside rotor type induction motor for the fan. Nearly all of the induction motors consist of two parts, rotor and stator, and the position of rotor is generally inside of stator. However, the rotor of the developed induction motor is located outside of stator. It is believed that the outside rotor type induction motor is suitable for the fan due to its large inertia, that is, it is considered that the change of air flow rate resulting from input power or load fluctuation is reduced. In this paper, the two tests which are suitable to obtain the electrical parameters of the outside rotor type induction motor were described, then various parameters of outside rotor type induction motor were measured. These are the locked rotor test and no load test. By using these tests, it was possible to determine the parameters which are presented in the steady-state equivalent-circuit of the outside rotor type induction motor. Load test of induction motor was carried out using a dynamometer and the torque-speed curve was obtained. It is believed that the results of this paper can be used for the development of the outside rotor type induction motor.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.168-183
• /
• 2013

Contemporary era has witnessed a diversity of emotion and emotions being expressed through consumption. This paper examines the relationship between social paradigms and emotional design by means of literature study. In sections 2 and 3, I examine the prevalent social paradigms and the concept/development of emotional design. In section 4, I show the correspondence between social paradigms and specific types of emotional design. More specifically it is shown that "pluralism and decentrality" has led to fun design, individual design and participative design; "emotional revolution" has given rise to multi-sensory design, design with positive feelings, design with negative feelings and aesthetic design; "non-materialistic values" have their correspondence in design as performance and story-telling in design; and "organic worldview" finds its expression in ecological design with a wellness emphasis, and in interactive emotional design.

• Journal of Astronomy and Space Sciences
• /
• v.12 no.1
• /
• pp.112-122
• /
• 1995

We assume that the KOREASAT fails the entry of the geostationary orbit due to the error at the apogee kick motor firing. A simulation is done for the satellite that has a geosynochronous orbit with a non-zero degree inclination angle due to the failure at the apogee kick motor firing caused by the unbalance of the fuel storage and the spin of the thrust vector, etc. We analyzed the evolution of the orbit using the perturbation theory and calculated the changes of the eccentricity and the inclination. WHen a communication satellite has the figure eight trajectory, the beam point also traces the satellite. In this paper, We develope an algorithm to attack the above problem by stabilizing the beam point using the adjustment of the roll angle of the satellite. The spin action on the polarization plane that occurs when a satellite passes the ascending node and descending node affects the efficiency of the communication a lot, so we did another simulation for the better yaw angle adjustment for the KOREASAT to reduce the spin actino on the polarization plane.

• Journal of Digital Convergence
• /
• v.11 no.6
• /
• pp.311-317
• /
• 2013

Most of the existing interactive arts or entertainment systems consist of the following three steps: 1. the system's prompting the action of the participant, 2. action of the participant, and 3. response of the system. They do not presuppose these successive processes are performed continuously and repeatedly, and they are designed to express the concept of the work in each interaction. The opposite approach is to transmit the concept of the work in a continuous and repeated experience. The authors propose "Adjustive Media" as a type of work based on this approach. Adjustive Media has a spiral model with feedback. When participants experience the work repeatedly, they can recognize the difference of results between each interaction, and they can under- stand more closely the intent of the designer. This paper will propose 3 design processes for Adjustive Media as design method, and will introduce the prototypes of Adjustive Media.

• Korean journal of applied entomology
• /
• v.9 no.2
• /
• pp.81-84
• /
• 1970

The occurence of apple canker in the three main apple growing areas including Yesan, Chungju and Taegu was investigated during the four years from 1967 to 1970. According to the survey, about 30 percent of apple plants was infected with canker organisms and more the disease occurred in older plants in comparison with younger ones. Jonathan was said to be highly susceptible among five varieties observed. Main trunks or main branches had more canker lesions than those of twigs or of side branches. The survey showed that application of higher nitrogenous fertilizer without boric acid predisposed to the disease together with sandy soil.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.1
• /
• pp.38-43
• /
• 1993

A Hybrid Finite Element Method(HFEM) is applied to solve the electrormagnetic scattering from multi-layered dielectric cylinders. An unbounde region is divided into local boundary regions where a practical differential equation solution is obtained, with the remaining unbounded region represented by a boundary integral equation. If sources, media inhomogeneities, and anisotropies are local, a surgace may be defined to enclose them. Therefore the integral region so defined is bounded, and differential techniques may be used there. Also, in the re- maining unbounded region a boundary integral equation may be formulated using only a simple free - space green's function. Therefore, The local boundary is represented by a boundary - value problem with boundary conditions and solved by the finite element method. The advantage of the proposed method is simple and efficient in the work of electromagnetic scattering. The validity of the results have been verified by comparing results of other method(boundary element method). Examples has been presented to calculate the scattered fields of lossy dielectric cylinders of arbitray cross section.

• Journal of Animal Science and Technology
• /
• v.46 no.1
• /
• pp.49-54
• /
• 2004

Effects of low quality roughage sources on duration and frequencies of rumination and chewing in Hanwoo steers were determined, Animals were fed three diets; concentrate+rice straw(SO:SO), concentrate+ rice straw + popped rice hull(SO:3S: IS) and concentrate+ rice straw+ground rice hull(SO:3S: IS) to compare both rice straw alone and combination with rice hull. Eating and ruminating time of steers fed concentrate+ rice straw(SO:50), concentrate+ rice straw + popped rice hull(50:35:15) and concentrate + rice straw + ground rice hull(50:3S:15) were 78.8 and 338.4minlday; 98.0 and 362.5minlday, and 160 and 519.2min/day, respectively. When steers were fed popped rice hull and ground rice hull, time spent for both eating and ruminating was significantly increased(p <0.05). When steers fed popped and ground rice hull, number of ruminating chews and number of chews per rumination time were significantly decreased(p<0.05). The number of rumination boli and boli per rumination time had significantly decreased(p<0.05), but chewing time per boli, number of chew'S per bolus were significantly increased(p

• Journal of Science of Art and Design
• /
• v.11
• /
• pp.51-78
• /
• 2007

Entertainment Industry is a high value-added business and its market includes the whole world. With high-tech industry, it is said that entertainment industry strengthen country's competitiveness, and the Korean government is trying to find a way to develop the animation industry. Some domestic feature animations were made, but they failed to get sufficient audiences. Meanwhile, Shrek 2, made by PDI, has earned about 92,000,000,000$ through just theatrical revenue. The reason is that domestic animations are not exciting. Contents should have amusement in it. The humor is the most important thing to make fun. So this thesis suggest to analyse Humor Types in animations. It is based on several theories about Humor. The types of humor defined by the previous studies are summarized into (1) humor, (2) wit, (3) satire and (4) irony. I categorize the productive methods of visual humor into (1) visual pun, (2) visual parody and (3) visual paradox adopting Henri Bergson's theory of the production methods of humor. And I comment on humorous scenes of Shrek in points of design basic elements, such as (1) visual elements, (2) relational elements and (3) practical elements. And I classify humor responses into the incongruity theory, the superiority theory, and relief theory. Therefore this study suggest a reasoned method to categorize the humor types effectively for producing or analyzing various types of humor effects in animation fields.

• Journal of Sericultural and Entomological Science
• /
• v.51 no.1
• /
• pp.68-72
• /
• 2013

Fibroin and sericin are natural proteins obtained from cocoon and one of the spotlight materials for medical device. Medical device made of these proteins also has the advantage that this material is biodegradable in to amino acid. In this study, we prepared silk sponges using fibroin, sericin and additives. The characterizations of the silk sponges such as morphology, stability, and blood absorbency were observed. The structural stability of the silk sponge decreased significantly by increasing sericin contents. The effect on the concentrations of ethanol to induce crystallization was observed to be superior to 70% ethanol. Structural stability of silk sponges containing additives was very lower than those not containing additives. The blood absorbency of the silk sponges was found to be excellent, regardless of the composition of sericin and fibroin. The resilient power of these sponges was also very good, in spite of the repeated soaking and drying. Therefore, we expect that the silk sponges can be used medical supplies such as plastic implants and hemostatic cotton.