• 전기의세계
• /
• v.30 no.7
• /
• pp.441-447
• /
• 1981

As a preceeding work for the study on dielectric characterstics of a kind of low density polyethylene introduced morphological change by mechanical method, glass transition temperature which is regarded as a macroscopic aspect for relaxation of molecular chain segments has been observed by means of temperature dependent dilatometric measurement. The origina specimen clearly shows two knees which correspond to two peaks (.gamma. and .betha. peak) in the intenal friction measurement, suggesting the existence of separated glass transition temperatures at 150.deg.k and 260.deg.k respectively. On the specimen irradiated to 100 Mrad both glass transition temperatures tend to shift towards high temperature sides because of crosslinking by irradiation. furthemore an evidence can be seen that radiation effect, even in amorphous phase, is also slelctive depending on slight morphological differences. The specimen extended to four times in length shows a peculiar nature such as negative linear thermal expansion coefficient increasing with temperature between 220.deg.k and ambient temperature and that this fact is interpreted by considering that c axis of the lattice aligns along the extended direction by drawing, further c axis inherently possesses the characteristics of negative linear thermal expansion coefficient. For the observations that the relatively small positive linear expansion on the specimen extended to ca. two times as well as the part below 220.deg.k of the specimen extended to four times, it is considered for the reason of the facts that the incompletely oriented region indicated as the middle part of Peterlin's model tends to restore partially to orginal arrangement-a kind of phase transition-as increasing with temperature.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.29-29
• /
• 2014

최근 화석에너지 고갈 및 에너지 수요의 폭발적 팽창을 해결하기 위하여 경량화와 내마모 측면에서 고효율 시스템을 적용한 자동차 및 각종 성형 기기들이 개발되고 있다. 특히 장치의 고성능화라는 요구조건을 충족시키기 위해서는 금속가공산업에서 표면개질의 중요성이 부각되고 있다. 이러한 표면개질에는 일반적으로 표면의 성질을 개선하여 마모(abrasion) 및 국부 압력(local stress) 또는 피로(fatigue), 마식(wear and corrosion)에 견디게 하여 부품의 수명증대와 제품의 소형화에 기여하고 있다. 이러한 표면개질법에는 경질의 물질을 표면에 코팅시켜 재료표면의 특성을 향상시키는 방법과 금속의 표면에 다른 원소를 침투 및 확산시키는 방법으로 나눌 수 있다. 확산방법으로 침탄, 질화, 보로나이징, 크마이징 처리 방법 등이 있다. 상업적으로 가장 많이 사용되는 표면 개질법은 침탄기술로서, 고온에서 짧은 시간내에 물성 향상이 가능하지만, 강의 변태점 이상의 온도에서 진행됨으로서, 변형에 따른 문제가 발생되어 후처리를 필요로 하는 문제점을 가지고 있다. 반면, 질화법은 변태점 이하의 저온에서 철강 표면에 N을 침투시켜 강을 경화시키는 특징을 가진다. 변형이 적고 질소원자가 강내에 침투함으로 인해 내마모성, 내피로성, 내식성 등의 물리적 성질을 향상시키는 점에서 유리하여 각종 정밀 부품 및 자동차 부품, 금형 등에 많이 사용된다. 또한, 경도 향상 및 결정구조의 영향으로 코팅처리시 모재와 코팅 층의 밀착력 향상을 가져오면 이러한 이유로 코팅 층의 하지 층으로써 각광 받고 있다. 본 발표에서는 플라즈마 질화의 이해를 높이기 위해 관련 기술에 대한 전반적인 소개와 향후 플라즈마 질화 기술의 적용이 기대되는 침탄대체 적용 가능 부품, 침류질화 기술, PECVD 공정과의 접목 등 산업적은 응용 측면에서 응용 분야에 대한 소개를 진행하고자 한다.

• Journal of Biomedical Engineering Research
• /
• v.20 no.5
• /
• pp.601-608
• /
• 1999

동맥의 일부분의 팽창하는 동맥류는 높은 사망률을 야기하는 혈관계 질환이다. 동맥류의 발생 및 파열에는 동맥류 내부의 혈류의 유동에 의한 혈관벽 전단 응력 및 압력이 주용한 원인 중 하나로 의심되고 있다. 복부대동맥류 내부의 혈류 유동 특성을 밝히기 위해서 동맥류의 최대 확장부가 복부동맥의 1.5배, 2배인 유리 모델을 제작하였다. 정상류 상태에서 다양한 레이놀즈수에 대해서 속도 및 난동도를 입자영상속도계를 이용하여 측정하였다. 경계층 박리로 인한 재순환 부분이 끝나는 재부착점은 동맥류 최대 확장부 후부에서 발생하였으며, 이 위치는 레이놀즈수의 변화에 따라 바뀌었다. 축방향 속도의 난동은 최대 확장부 후부에서 크게 나타났으며, 이 위치에서 난동에 의한 부가적 응력이 크며 혈관벽 구조변화가 발생하리라 예측된다. 동맥류 내부의 압력분포는 수치해석에 의해 계산되었다. 동맥류 내부 압력은 크기가 증가함에 따라 커졌으며 압력은 동맥류 최대 확장부 후부에서 발생하는 재부착점에서 최대값을 나타내었다. 동맥류 최대확장부 후부는 압력이 최대값을 가지며, 전단력의 변화 및 난동이 큰 지역이므로 동맥류의 파열이 발생하기 쉬운 지역으로 예측된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.210-213
• /
• 2006

나노입자를 이용하여 치밀한 $Cu(In,\;Ga)Se_2$ 태양전지용 광흡수층을 제조하기 위해 먼저, 콜로이달 방법으로 합성된 20nm이하의 CIGS 나노입자를 저가의 스프레이 법을 이용하여 CIGS 막을 제조하였다. 제조된 CIGS막을 two-zone RTP (rapid temperature Process) 방법으로 Se 분위기 안에서 열처리를 행하였다. 입자의 치밀화를 위해 기판의 온도, Se 증발온도와 수송가스의 유량을 조절하여 CIGS 입자성장을 행하였다. 그러나, Se의 증발온도가 높을수록 CIGS와 MO 박막 사이에서 $MoSe_2$ 층이 형성되었다. 형성된 $MoSe_2$층의 부피 팽창으로 인해 하부의 유리기판과 Mo층 사이에서 peeling off 현상이 발생했다. 이러한 Peeling off현상을 억제하면서 CIGS 나노입자 성장을 하기 위해, Se 공급을 빨리 할 수 있도록 Se의 증기압을 높였으며, 최적조건에서 급속 열처리 공정을 통해 CIGS 나노입자 성장과 치밀화를 위한 소결거동을 관찰하였다.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.247-254
• /
• 2014

Strain properties of concrete member which acts as an important factor in the stability of the concrete structure in the event of fire, significantly affected the characteristics of the coarse aggregate, which accounts for most of the volume. For this reason, there are many studies on concrete using artificial lightweight aggregate which has smaller thermal expansion deformation than granite coarse aggregate. But the research is mostly limited on concrete using clay-based lightweight aggregate. Therefore, in this study, the high temperature compressive strength and elastic modulus, thermal strain and total strain, high temperature creep strain of concrete was evaluated. As a result, remaining rate of high-temperature strength of concrete using lightweight aggregate is higher than concrete with general aggregate and it is determined to be advantageous in terms of structural safety and ensuring high-temperature strength from the result of the total strain by loading and strain of thermal expansion. In addition, in the case of high-temperature creep, concrete shrinkage is increased by rising loading and temperature regardless of the type of aggregate, and concrete using lightweight aggregate shows bigger shrinkage than concrete with a granite-based aggregate. From this result, it is determined to require additional consideration on a high temperature creep strain in case of maintaining high temperature like as duration of a fire although concrete using light weight aggregate is an advantage in reducing the thermal expansion strain of the fire.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.7
• /
• pp.1002-1010
• /
• 2003

This study was carried out to develope yeast leavened pan bread using the commercial Doenjangs (Korean soybean pastes). Physicochemical properties of the Doenjang products were measured such as aminonitrogen, pH, titratable acidity and salinity, reducing sugar, total free sugar, total organic acid, PDI (protein dispersibility index) and color. Seven products of Doenjang were freeze-dried and powdered to be used in bread formula at the levels of 2.5, 5.0, 7.5 and 10.0%. When the Doenjang powder was added up to 5.0%, the ovenspring during baking remarkably increased resulting in increased loaf volume. However, with Doenjang powder more than 7.5%, the loaf volume became smaller than the control as the dough expansion and ovenspring decreased. Thus when Doenjang was added to bread dough, the loaf volume was highly correlated with ovenspring (r=0.92) but it was not with dough expansion during 1st fermentation (r=0.56). The browning color of bread crust and crumb became deeper with decrease in L value as the addition of Doenjang powder increased. From the mechanical texture measurements of bread crumb, hardness, gumminess and chewiness decreased with addition of Doenjang powders. Regardless of the kinds of Doenjang, the Doenjang powders could be added into the bread dough up to 5.0%, improving the loaf volume and texture of yeast leavened pan bread and demonstrating the possibility of producing a functional bread using the Doenjang powders.

• Resources Recycling
• /
• v.27 no.2
• /
• pp.38-47
• /
• 2018

Integrated gasification combined cycle (IGCC) is a next generation energy production technology that converts coal into syngas with enhanced power generation efficiency and environmental performance. IGCC produces almost coal gasification slag as the solid by-product. IGCC slag is generated about 140,000 tons for a year although recycling of it is still in the early stages. We evaluated the potential of IGCC slag which is generated from a pilot plant in South Korea as an alkali-activated cement. Samples which were activated with the combined activator of sodium silicate solution and caustic soda had an average compressive strength of 4.5 MPa, showing expansion. Expansion of the alkali-activated slag was presumed to be caused by free CaO in the slag, although it was not detected by the ethylene glycol method. Samples that were activated with the combined activator of sodium aluminate and caustic soda had an average compressive strength of 10 MPa. Hydroxy sodalite and $C_3AH_6$ were found to be the new crystalline phases. IGCC slag can be used as an alkali-activated material, but the strength performance should be improved with proper mix design approach to calculate optimum proportions which can alleviate the expansion issue at the same time.

• Resources Recycling
• /
• v.8 no.1
• /
• pp.23-28
• /
• 1999

Firing characteristics, transverse rupture strength, and heat capacity were studied of the heat-reservoir refractory materials made of red-firing clay, mill scale, and water glass. The firing shrinkage increased with increase of the clay proportion in samples. The volume of fired bodies showed shrinkage by drying up to $300^{\circ}C$, steady expansion in the 300-$700^{\circ}C$ range due to phase transition of iron oxides. and drastic expansion above $1200^{\circ}C$. Flexural strength decreased from 5.6 Mpa to 2.35 Mpa with the decrease of the ratio of clay to mill scale from 1:1 to 1:3 Heat capacities changed from 1.1 Joul/g$^{\circ}$C to 1.35 Joul/g$^{\circ}$C with the ratio of millscale to clay ratio from 1:1 to 1:3. Mill scale in the specimen appears to exist as liquid phase during firing. Firing the specimens in air leads to the eruption of the molten mill scale to the sample surfaces. Contrarily, firing samples in a refractory sagger with a cover suppressed the eruption of the molten mill scale to the surfaces. The addition of mill scale gave rise to porous sintered bodies which would delay cooling rates of heat-reservoir brick.

• Korean Journal of Animal Reproduction
• /
• v.25 no.4
• /
• pp.371-379
• /
• 2001

The objective of this study was to establish an effective cryopreservation method of in vitro-produced bovine embryos. For the vitrification, in virtro-produced embryos at 8-cell, morula and blastocyst stages were exposed to freezing solution containing 5.5 M EG (EG 5.5) for 20 sec, loaded on each containers such as EM grid, OPS and Cryo-loop, and then immediately plunged into liquid nitrogen at -196$^{\circ}C$. Thawed embryos were serially diluted in 0.5, 0.25 and 0.125 M sucrose in m-HPBS, each for 1 min, and cultured in CRlaa medium supplemented with 10% FBS. Significant differences in the rates of re-expanded and hatched embryos were not observed among these embryo containers. The total cell number of expanded blastocyst cultured in vitro after vitrification was examined by Hoechst staining. There were no differences between non-vitrified (180.0 $\pm$ 5.4) and vitrified groups (178.0 $\pm$ 7.5). In addition, when the cellular injuries after vitrification were compared by double staining. There were no significant difference in the ratio of live and dead cells between non-vitrified group (176 : 4) and vitrified group (172 : 6). Therefore, these results suggest that bovine embryos can be cryopreserved easily, effectively and successfully by vitrification using various containers, such as EM grid, OPS or Cryo-loop in the presence of EG 5.5 freezing solution.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.953-960
• /
• 2019

The Miller cycle is a diesel engine that has been developed in recent years that it can reduce NOx and improve fuel consumption by reducing the compression ratio through intake valve closing (IVC) time control. The Miller cycle can be divided into the early Miller method of closing the intake valve before the bottom dead center (BDC) and the late Miller method of closing the intake valve after the BDC. At low speeds, the late Miller method is advantageous as it can increase the volumetric efficiency; while at medium and high speeds, the early Miller method is advantageous because of the high internal temperature reduction effect due to the expansion of the intake air during the piston lowering from IVC to BDC. Therefore, in consideration of the ef ects of the early and late Miller methods, it is necessary to adopt the most suitable Miller method for the operating conditions. In this study, a two-stage turbo charge system was applied to four-stroke engines and the process of enhancing the Miller effect through a reduction of the intake and exhaust valve overlap as well as the valve change adjustment mechanism were considered. As a result, the ef ects of fuel consumption and Tmax reduction were confirmed by adopting the Miller cycle with a two-stage supercharge, a reduction of valve overlap, and an increase of suction valve lift.