• Korean Journal of Food Science and Technology
• /
• v.18 no.2
• /
• pp.168-172
• /
• 1986

The swelling and hydration properties of Korean red ginseng tails and yield of total solids in extract were studied during extraction with ethanol solution having a concentration of 0-90% at $60-100^{\circ}C$. Extraction was carried out 5 times which was taken 8 hours per each time of extraction. The swelling, hydration and total solids yield were increased as the ethanol concentration decreased and as the extraction temperature raised. The cumulative value of solids yield suggested that three times of extractions with water or 70% ethanol were effective to recover more than 84%. Linear regression analysis on the properties investigated and extraction conditions showed a linear logarithmic relationship .

• Journal of Korea Foresty Energy
• /
• v.18 no.2
• /
• pp.70-77
• /
• 1999

The behaviors of alkali swelling in four major Korean woods were examined as a function of concentration cf alkali solution. Density of alkali-treated woods increased highly with increasing alkali concentration in both softwoods and hardwoods. Wood samples swelled in dimension during alkali swelling, and thereafter they shrank highly by water washing and air drying. The air-dried wood samples after alkali treatment showed almost isotropic shrinkage in tangential and radial direction.

• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.14-21
• /
• 1985

This study was carried out in order to prevent the devaluation of wood itself and wood products causing by anisotropy, hygroscopicity, shrinkage and swelling - properties that wood itself only have, in order to improve utility of wood, by emphasizing the natural beautiful figures of wood, to develop the dimensional stabilization techniques of wood with PEG that it is a cheap, non-toxic and the impregnation treatment is not difficult, on the effects of PEG molecular weights (200, 400, 600, 1000, 1500, 2000, 4000, 6000) and species (Pinus densiflora S. et Z., Larix leptolepis Gordon., Cryptomeria japonica D. Don., Cornus controversa Hemsl., Quercus variabilis Blume., Prunus sargentii Rehder.). The results were as follows; 1) PEG loading showed the maximum value (137.22%, Pinus densiflora, in PEG 400), the others showed that relatively slow decrease. The lower specific gravity, the more polymer loading. 2) Bulking coefficient didn't particularly show the correlation with specific gravity, for the most part, indicated the maximum values in PEG 600, except that the bulking coefficient of Quercus variabilis distributed between the range of 12-18% in PEG 400-2000. In general, the bulking coefficient of hardwood was higher than that of softwood. 3) Although there was more or less an exception according to species, volumetric swelling reduction was the greatest in PEG 400. That is, its value of Cryptomeria japonica was the greatest value with 95.0%, the others indicated more than 80% except for Prunus sargentii, while volumetric swelling reduction was decreased less than 70% as the molecular weight increase more than 1000. 4) The relative effectiveness of hardwood with high specific gravity was outstandingly higher than softwood. In general, the relative effectiveness of low molecular weight PEG was superior to those of high molecular weight PEG except that Quercus variabilis showed more than 1.6 to the total molecular weight range, while it was no significant difference as the molecular weight increase more than 4000. 5) According to the analysis of the results mentioned above, the dimensional stabilization of hardwood was more effective than softwood. Although volumetric swelling reduction was the greatest at a molecular weight of 400. In the view of polymer loading, bulking coefficiency reduction of swelling and relative effectiveness, it is desirable to use the mixture of PEG of molecular weight in the range of 200-1500. To practical use, it is recommended to study about the effects on the mixed ratio on the bulking coefficient, reduction of swelling and relative effectiveness.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.29-34
• /
• 2008

Purpose: In this study, we compared the physical properties of the compositions that were mixed with basic materials of HEMA (2-Hydroxyethyl methacrylate)/Silicone and BMA (Butyl methacrylate), MMA (Methyl methacrylate) by making the silicone contact lens. Method: Each sample of contact lenses was fabricated by cast mould method. We analyzed results by using average values of physical property of each sample. Results: In the composition of HEMA/Silicone/BMA, water contents of samples showed the value from 24.69% to 29.26%. Ultimate strength of samples showed the value from 0.109 kgf to 0.263 kgf. In the composition of HEMA/Silicone/MMA, swelling ratio of samples showed the value from 13.56% to 14.83%. Water contents of samples showed the value from 25.61% to 29.33%. Ultimate strength of samples showed the value from 0.107 kgf to 0.286 kgf. Conclusions: The compositions of percents of silicone were ranged from 0.20% to 11.50% and the composition percent of BMA and MMA was 5.15% in total. Swelling ratio and water contents increased with decreasing of BMA (Butyl methacrylate) and MMA (Methyl methacrylate) percent. In the composition of HEMA/Silicone/MMA, the values of ultimate strength increased with increasing of silicone percent to 4-MMA sample. In the composition of HEMA/Silicone/BMA, the values of ultimate strength decreased with increasing of silicone percent.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.3
• /
• pp.259-265
• /
• 2006

We polymerized material of AA(Acrylic acid) and BMA(butyl methacrylate) to make up for the weak points of hydrogel contact lens. The synthesis process of silicone synthesis is as follows. Acrylate-PDMS(Polydimethylsiloxane)-Urethane prepolymer was composed after Diisocynate reacted with HEMA(2-hydroxyethylmethacrylate) under the catalyst and it reacted again with bis(hydroxyalkyl) terminated poly(dimethylsiloxane) with high oxygen transmissibility characteristics. HEMA(2-hydroxyethylmethacrylate) was used to make prepolymer that can be polymerized and the urethane was used to improve elasticity and oxygen transmissibility, copolymerization was performed with conventional hydrogel contact lens materials to make silicone hydrogel contact lens with higher oxygen transmissibility. For manufacturing of contact lens, We added BMA(Butyl methacrylate) with better elasticity and flexibility, and AA(Acrylic acid) with higher moisturizing to used contact lens materials. AIBN (Azobis2-methylpropionitrile) as initiator and EGDMA(Ethylene Glycol Dimethacrylat) as crosslinking agent were used and the lens with higher oxygen transmissibility and better moisturizing were manufactured complying with basic contact lens properties, which have several combination trial of each monomer characteristics. Compounding SN which included SILICONE, HEMA, NVP and EGDMA etc was showed by swelling ratio of 9.38% and water content of 23.7%. SN was showed by swelling ratio of 9.38%, water content of 23.7% and a visible ray transmissibility of 89%. SB which added BMA in the SN was showed by swelling ratio of 12.50%, water content of 18.56% and a visible ray transmissibility of 88%. SAB which added both AA and BMA in the SN was showed by swelling ratio of 8.33%, water content of 12.93% and a visible ray transmissibility of 88%.

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.62-72
• /
• 2001

To elucidate the behaviors of alkali swelllng of woods. the dimensional change in cross section of cell elements of four major Korean woods during alkali swelling were examined by an optical microscory, an imaging analysis method and an X-ray diffrartion During alkali swelling, tracheid diameter of Larix kaempferi wood showed greater swelling property than that of Pinus koraiensis wood, and the cell wall swelled highly over 10% sodium hydroxide solution treatment. The radial diameter of vessel elements in earlywood shrunk, but it swelled slightly in tangential direction. When treated with 5% NaOH, the wall thickness of wood fiber increased about three times over the original one. The thickness of cell wall in all elements and the diameter of wood fiber and tracheid showed almost isotropic shrinkage. The diameter of cell elements during the mercerization process decreased, but cell wall thickness Increased. Crystal transformation of cellulose in wood was not occurred by alkali treatments. but relative crystallinity and crystallite width of the woods increased slightly. Consequently, it was demonstrated that the swelling properties of woods were dependant on wood species, cell elements and alkali concentration.

• Nuclear Engineering and Technology
• /
• v.24 no.1
• /
• pp.40-51
• /
• 1992

One of the important irradiation performance characteristics of the silicide dispersion fuel element in research reactors is the diameteral increase resulting from fuel swelling. This paper, will attempt to develop a physical model for the fuel swelling, DFSWELL, by analyzing the basic irradiation behaviours and some experimental evidences. From the experimental evidences, it was shown that the volume changes in irradiated U$_3$Si-Al were strongly dependent on temperature and fission rate. The quantitative-amount of swelling for silicide fuel is estimated by considering temperature, fission rate, solid fission product build-up and gas bubble behavior. The swelling for the silicide fuel is comprised of three major components : i ) a volume change due to the formation of an interfacial layer between the fuel particle and matrix. ii ) a volume change due to the accumulation of gas bubble nucleation iii ) a volume change due to the accumulation of solid fission products The DFSWELL model which takes into account the above three major physical components predicts well the absolute magnitude of silicide fuel swelling in accordance with the power histories in comparison with the experimental data.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.327-333
• /
• 2015

To measure the dimensional stability of three softwoods by vacuum pressurization of water soluble melamine-formaldehyde (MF) resin impregnation process, properties of resin treated compressed woods (compregs) were measured after impregnating the water soluble MF resin into three coniferous wood species for different impregnation times and resin concentrations. As the resin concentration was higher and impregnation time was longer, coefficients of volumetric shrinkage and anti-volumetric swelling efficiency increased, but coefficients of volumetric swelling, anti-volumetric swelling efficiency and absorption decreased. Also, weight percent gain increased remarkably as the resin concentration was high, but there was no uniform relationship with impregnation time.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.478-485
• /
• 2013

In this study, hydrogels with fast swelling and high absorbent properties were prepared using biopolymers approved as a food additive and their swelling properties were characterized. To improve the swelling properties of conventional hydrogels, we formed gas bubbles using a foaming agent in the process of preparing hydrogels and characterized in terms of equilibrium swelling ratio, swelling kinetics and cytotoxicity. In particular, alginate hydrogels observed by a digital microscope have an open-pore channels structure with the sizes of hundreds micrometers. Also, the cell viability of all hydrogels were found to be much higher than that of poly(acrylic acid).

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.158-163
• /
• 2015

Rice embryo is more abundant than endosperms in nutrients such as proteins, lipids, and vitamin B1. In this study, we constructed p53 plasmid that could be expressed in a plant system, and investigated optimal germination conditions in a variety of media. For construction of p53 plasmid, we performed p53 amplification from pCDNA-p53, subcloned to TA cloning vector, and then reconstructed into pGEM-CaMV plant expression vector. On the other hand, we prepared a variety of imbibition buffers and complete media for efficient germination of the rice embryo. Imbibition buffers prepared with different concentrations of salt or detergent showed no significant effect on germination efficiency. We prepared further culture media, such as solid agar, liquid media, and paper towel to establish the optimal conditions. Rice embryo showed germination rates of more than 70% in the solid medium, more than 60% in the paper towel medium, but less than 25% in liquid media, although germination rate did not differ with varying concentrations of salt and sucrose in culture media. Under the optimal germination conditions, we introduced the p53 plasmid using imbibition method, and finally detected human p53 gene expression in the germinated rice embryo. This method might present a novel, practical approach for evaluating efficient gene expression utilizing imbibition method in rice embryo.