• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.196-196
• /
• 1994

DDS에 활용될 수 있는 고분자 소재를 개발할 목적으로 물성 및 응용성이 우수한 고분자 겔에 관한 연구를 수행하였다. Ethylene oxide,propylene oxide 각각의 copolymer인 poloxamer등의 prepolymer들을 triisocyanate로 가교시키고 diisocyanate 로 chain이 연장된 "soft hydrogel"을 제조하였다. 모델 약물을 선정하여 crosslinker와 extender의 조절에 따른 hydrogel의 약물 방출 조절능을 조사하였으며 그 기전을 규명하고자 하였다. 가교부위에 urethane bond를 함유한 soft hydtogel은 건조상태에서도 고무와 같은 전연성을 보여 일반적인 hydrogel과 대비되는 특성을 보였으며 이에 따른 다양한 활용성이 기대되었다. Extender및 crosslinker의 비율에 따라서 이 rubber elasticity가 조절되었다. 가교도가 감소할수록 팽윤도가 상승하였고 이에 따른 약물방출도 증가함을 확인하였다. 또한 Prepolymer의 분자량 및 친수/소수성등의 물성에 따라 약물방출을 조절할 수 있었다. 제조된 hydrogel에 조절방출시 필요한 기능을 부가시키고자 poly(carylic acid)류와 IPN 공중합체를 합성하여 물성을 조사하였고 비이온성/양이온성/음이온성 모델약물을 선정하여 pH에 따른 가변적 팽윤도와 이온성 상호작용등에 근거한 약물 조절방출기전을 조사하였다.기전을 조사하였다.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.545-557
• /
• 2001

The crosslinked films retaining cholesteric liquid-crystalline order were prepared by casting the liquid crystalline solutions of hydroxypropyl cellulose (HPC) in methanol with the two kinds of aliphatic dicarboxylic acid chlorides (succinyl chloride and suberoyl chloride). The temperature dependence on the cholesteric pitch of the crosslinked films and the swelling behavior of the films in both water and methanol were investigated. The films displayed fingerprint patterns charateristic of cholesteric liquid-crystalline phase, and their pitches, as well as HPC itself, increased with temperature. However, the pitch of all crosslinked samples was much greater than that of HPC at the same temperature and increased with increasing concentration and chain length of the crosslinker. The crosslinked samples exhibited an anisotropic swelling in both solvents. The degree of anisotropy slightly depended on the solvent and crosslinker species, but hardly on the crosslinker concentration investigated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.21-21
• /
• 1998

Polyethylene glycol(PEG) 또는 polycaprolactone(PCP)을 예비 중합체로 사용하고 butanetriol trinitrate와 diethylene glycoldinitrate를 가소제로, cyclo-tetramethylene tetranitramine을 주산화제로 사용한 고체 추진제를 제조하여 이들의 기계적 성질을 증진시키기 위한 연구를 하였다. PEG의 일부를 PCP로 대체 시 추진제의 기계적 성질은 증가하며 PCP만 사용시 추진제의 최대 인장 강도는 PEG만 사용시 보다 약 17%, 최대 응력 하에서의 신율은 약 59% 그리고 탄성 계수는 약 9% 증가한다. 그러나 예비 중합체로 PCP만을 사용한 추진제는 4$0^{\circ}C$, 90% 상대 습도하에서 보관시 추진제의 경도 변화 실험에서 6주 후에 경도가 0이 되며, 위의 조건하에서 보관 기간에 따른 PCP 바인더의 부피 팽윤 실험에 의해 초기 부피 팽윤 비와 팽윤비의 변화 속도가 PEG를 혼용한 바인더보다 크므로 PCP 사용시 수분에 대한 안정성은 저하됨을 알 수 있었다.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.352-355
• /
• 1998

토목섬유제품 중에서 차수재조 널리 사용되는 지오멤브레인은 1$\times$$10^{-12}$의 낮은 투수계수를 갖고 있지만 시공전후 찢어지거나 구멍이 뚫리게 되면 침출수의 유출이 발생하여 환경오염을 일으키게 된다. 이를 보완하기 위해 친수성과 팽윤성이 큰 벤토나이트 물질을 이용한 Geosynthetic Clay Liner(GCL) 복합재료가 개발되었다. GCL은 지오텍스타일이나 지오멤브레인사이에 벤토나이트를 충진시키고, 접착제 또는 니들펀칭(needle-punching)이나 스티칭(stitching)과 같은 기계적인 방법으로 결합한 복합재료이다. (중략)

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.3
• /
• pp.95-100
• /
• 2006

Synthesis of the non-swelling property micas was carried out by hydrothermal method. In order to artificially induce the diffusion of ions, a rotating system was attached to the hydrothermal apparatus and by adding 0.7 mm zircon beads, synthesis of the non-swelling property micas could be performed in a low temperature area. The hydrothermal conditions for the preparation of micas were a reaction temperature of $260^{\circ}C$, for 72 hrs, using $1K_2O,\;1Al(OH)_3,\;4Mg(OH)_2\;and\;6SiO_2$ as the starting materials and a 8M-KOH solution as the hydrothermal solvent. The micas obtained under these conditions were a plate shape with a size of $2.89{\mu}m$ and showed a whiteness of over 97 %. Also, through the FT-IR analysis, because the absorption peak of the $Mg_3OH$ vibration was observed at approximately $3700cm^{-1}$, it could be known that it was phlogopite of non-swelling property showing the chemical composition of $KMg_3AlSi_3O_{10}(OH)_2$. This result was very consistent with the EDS analysis where O (41.34 %), Mg (3.88 %), Al (11.45 %), Si (17.62 %) and K (25.71%) elements were detected.

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.18-23
• /
• 2004

Superabsorbent poly(potassium acrylate-co-acrylamide)s were synthesized in particle form using inverse suspension polymerization technique. Mean diameter of the prepared polymer particles decreased from 300 to 50 $\mu\textrm{m}$ with increasing surfactant concentration. The dynamic and equilibrium swelling behaviors during water absorption and drying process were investigated by weight measurement. The swelling ratio of polymer particles in water changed according to not only polymer crosslinking density, but particle size, saline concentration of aqueous medium, and copolymer compositions. Water sorption amount was increased with decreasing particle size, crosslinking agent concentration, and ion concentration in bulk solution. Being different from the water sorption process, the drying process was not significantly affected by particle size, polymer composition, or crosslinking amount.

• Korean journal of food and cookery science
• /
• v.30 no.6
• /
• pp.670-678
• /
• 2014

The purpose of this study was to find the optimal swelling method and condition for seacucumber to improve its taste and texture to accomodate the rapid increase of consumption. Another purpose was to try to determine an easy way to soak dried sea-cucumber under different conditions, and identify the influence of swelling time on the texture of sea-cucumber, in order to reduce preparation time and provide basic data for easy handling. After boiling or steaming for six different periods including 5, 15, 30 and 60 minutes the texture of the sea-cucumbers were compared, For the additive test, the sea-cucumbers were boiling for 30 minutes period with 4 different additives and the textures were compared, Since the texture is an important characteristic of sea-cucumber, there are many variables that affect this property including the, drying and preservation methods. This study provides basic understanding of the influence of the heating method, time and temperature on the swelling of sea-cucumber for handy use at processing sites.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.278-285
• /
• 2012

Effects of ion species on the expansion behavior of Poly(styrene sufonic acid)(PSSA) hydrogel were investigated in aqueous solution of selected anions, cations and hydrophobic ions. The deexpansion extent of Poly(stylene sulfonic acid) gel follow the sequence $SCN^-$<$Br^-$<$Cl^-$<$F^-$ in low concentration solutions due to the destabilization of anions to hydrogen bond between ${SO_3}^-$ and water. The deexpansion in cations followed the sequence of counterion interactions between ${SO_3}^-$ and cations. It was discussed the effects of ions on the hydrogen bonding through ${SO_3}^-$ and phenyl ring in salt solutions. Other interactions, such as the cation-${\pi}$ interaction, hydrophobic interaction, and dispersion force, contributed to the ion specific swelling of PSSA hydrogel.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.72-76
• /
• 2011

The physical properties of crosslinked poly(vinyl alcohol)(PVA) by natural dyes as crosslinking agents were investigated and a comparison was made with chemically crosslinked PVA by Polycup 172. It was found that natural anthocyanin and crocin made possible to crosslink PVA physically through the hydrogen bonding of OH in both PVA and natural dyes in the present with NaCl as a catalyst. The water swellability dramatically decreased and the physical crosslinking led to decreasing of crystallinity of PVA. The lowering of thermal stability was noticed in the physically crosslinked PVA compared to chemically crosslinked PVA due to its lower crosslink density. However even natural dyes have polysaccharides in their chain, their thermal stability was higher than uncrosslinked PVA.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.552-559
• /
• 2023

The purpose of this study is to evaluate the crack reduction performance of blast furnace slag concrete mixed with expansive and swelling admixtures. As a basic performance test, various ingredients such as blast furnace slag fine powder (BFS), calcium sulfoaluminate (CSA), bentonite, and hydroxypropyl methyl cellulose (HPMC) were used, and the results showed that bentonite showed superior performance compared to HPMC. Afterwards, a MOCK-UP test was conducted to evaluate cracking and drying shrinkage according to the mixing ratio. As a result, when bentonite and a small amount of calcium phosphate were added, drying shrinkage was reduced and cracking was reduced. In particular, a cement mixture consisting of 30 % BFS, 1 % bentonite, and 1 % calcium phosphate showed optimal crack-free performance. It is believed that BFS concrete will contribute to compensating for shrinkage through continuous expansion activity and can be used for field applications.