• Journal of KIISE:Software and Applications
• /
• v.34 no.7
• /
• pp.667-680
• /
• 2007

The bio-data processing is used for a suitable purpose with bio-signals, which are obtained from human individuals. Recently, there is increasing demand that the bio-data has been widely applied to various applications. However, it is often that the number of data within each class is limited and the number of classes is large due to the property of problem domain. Therefore, the conventional pattern recognition systems and classification methods are suffering form low generalization performance because the system using the lack of data is influenced by noises of that. To solve this problem, we propose a modified additive factor model for bio-data generation, with two factors; the class factor which affects properties of each individuals and the environment factor such as noises which affects all classes. We then develop a classification system through defining a new similarity function using the proposed model. The proposed method maximizes to use an information of the class classification. So, we can expect to obtain good generalization performances with robust noises from small number of datas for bio-data. Experimental results show that proposed method outperforms significantly conventional method with real bio-data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1269-1275
• /
• 2003

In this paper, nonradiative dielectric(NRD) rotman lens with a gap-coupled unidirectional dielectric radiator(UDR) has been designed. Gap-coupled UDR is structurally suitable for NRD rotman lens. We have optimized NRD rotman lens for minimizing side-lobe, and calculated design parameters of UDR such as length of resonator and distance of gap using an equivalent circuit model of an evanescent NRD guide. Experimental prototype of UDR is fabricated and measured at the center frequency of 38 GHz. The simulated S-parameter and far-field radiation beam pattern of UDR show good agreements with measured data. Finally, total beam pattern of NRD rotman lens of multi-beam feed has been obtained using a measured pattern of UDR and array factor of NRD rotman lens. The obtained beam pattern shows remarkably suppressed side-lobe.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.469-472
• /
• 2001

MPEC Audio Layer-III(MP3)알고리듬은 복호화기에 비해 부호화기가 월등히 많은 연산량을 가지고 있는 비대칭 구조를 가지고 있다. MP3 부호화기의 대부분의 연산량은 복잡한 초월함수 연산이 포함되는 심리음향모델과 반복 루프 과정을 수행하는 비선형 양자화와 비트 할당과정 이 차지한다. 본 논문에서는 MP3 부호화기의 실시간 구현을 위한 알고리듬 레벨의 최적화를 수행하였다. MP3 부호화기의 연산량을 줄이기 위해 심리음향모델을 간략화하고 반복 루프의 회수를 최소화할 수 있는 방법을 제안하였다. 프레임당 한 그래뉼의 심리음향모델 정보를 계산하여 한 프레임 내에서의 심리음향모델 정보를 추정함으로써 연산량을 45% 이상 감소시켰다. 또한 외부 반복 루프의 반복 회수를 줄이기 위하여 외부 반복 루프의 반복에 따른 스케일 팩터(Scale Factor) 및 양자화 스탭의 증가 패턴을 관찰하고 최적화된 스캐일 팩터 증가 방법을 제안하였다. 제안된 고속화 방법은 주관적 음질 평가를 통해 성능을 검증하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.1
• /
• pp.90-96
• /
• 2003

In this paper, arranged the isotropic point source of N number with the structure which is identical with the receive area. And against the array structure which has the radiation pattern which is identical with the receive area it researched. The arranged the element space flees grating lobe and in order to set the characteristic of optimum with half-wave equally space it selects. After inducing the array factor of each array structure, it calculated a radiation pattern. As a result of, the radiation pattern of the each Planar array antenna with structure of the receive area was similar and the possibility of getting an beam characteristic it was.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.68-74
• /
• 2006

An experimental study was carried out to investigate the combustion characteristics of the slinger combustor. A combustion test rig was manufactured and installed in KARI combustor test facility. From the ignition test results, we found that there were two major factors influencing the ignition limits; by increasing the rotational speed and the air mass flow rate, a better ignition performance was attained. From the combustion test results, we obtained 99.6% combustion efficiency, 15% pattern factor, and 3% profile factor. The results in this work indicate that the ignition and combustion characteristics of a slinger combustor are markedly different from those of a conventional annular combustor.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.79-85
• /
• 2006

As the portable information appliance is developed, the demand of flat panel display equipments and parts are steeply increased. Most of all, the applications of LCD such as LCD TV, monitor, digital camera, CNS(car navigation system) and game machine become diversified. With the result that the number of BLU production enterprise is increased and the research on the design of backlight with the superior optical properties is persistently in progress. In this study we developed the pattern design tools for CCFL(cold cathode flourescent lamp) backlight to improve the conventional pattern design environment in which the pattern is designed manually from the experience and the trial and error. For the verification of our research, we designed the light reflection surface patterns for a real model of backlight and we measured the brightness uniformity using the BM-7. From the brightness uniformity measurement, the BLU designed using the presented tool showed the tolerable performance only in the first try of pattern design rather than the fifth try of pattern design in case of the conventional pattern design.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.840-845
• /
• 2001

Development of a small gas-turbine combustor for 100kW class APU(Auxiliary Power Unit) has been performed. This combustor is a reverse-annular type and has a tangential swirler in the liner head to improve the fuel/air mixing and flame stability. Three main and three pilot fuel injectors of the simplex pressure-swirl type are used. The performance target at the design condition includes a turbine inlet temperature of 1170K, a combustion efficiency of 99%, a pattern factor of 30%, and an engine durability of 3000 hours. Under developing the combustor, we conducted performance test of our first prototype(TS1) with some variants. As a result of the test, the performance targets of the combustor are satisfied except that the pattern factor is about 4% higher than target value. So, we redesigned the second prototype(TS2) and conduct performance test with the critical focus on pattern factor and exit mean temperature. We adopted TS2 four variant to check the improvement of pattern factor. As the result, the pattern factors of several variants were satisfied with the performance target. Finally, We chose the TS2A variant as a final combustor for our APU model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.111-121
• /
• 2005

A 100kW class gas turbine combustor was developed and tested for PPU(Primary Power Unit) of ground vehicle. The combustor which employed annular-reverse type and pressure swirl atomizer was designed through 1-D analysis, 3-D thermal flow analysis and combustor performance was experimentally investigated on the combustor test rig. The test result was satisfactory. The developed combustor was also tested for environmental and endurance specification under engine adopted conditions and the application of a state-of-the-art gas turbine combustor to ground vehicle PPU turned out to be successful.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.6
• /
• pp.805-810
• /
• 2002

Development of a small gas-turbine combustor for 100㎾ class APU(Auxiliary Power Unit) has been performed. This combustor is a reverse-annular type and has a tangential swiller in the liner head to improve the fuel/air mixing and flame stability. Three main and three pilot fuel injectors of the simplex pressure-swirl type are used. The performance target at the design condition includes a turbine inlet temperature of l170k, a combustion efficiency of 99%, a pattern factor of 30%, and an engine durability of 3000 hours. Under developing the combustor, we conducted the performance test of our first prototype(TS1) with some variants. As a result of the test, the performance targets of the combustor are satisfied except that the pattern factor is about 4% higher than the target value. Therefore, the second prototype(TS2) was redesigned and the performance test was conducted with the critical focus on the pattern factor and the exit mean temperature. We adopted TS2 four variants to check the improvement of the pattern factor. As a result, the pattern factors of several variants were satisfied with the performance target. Finally, the TS2A variant was chosen as a final combustor fur our APU model.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.188-196
• /
• 2010

This study aims at empiricallly designing method to increase player's play capability through determining of the relations of player's behavior pattern and emotion factors when having gameplay experiences in MMORPG. For modeling emotion factors on gameplay, Our preliminary studies are considered in the process of rule-based systems on cognitive science approach. These study estabilished game architecture process applied of player's cognitieve emotion reactions in specific situation of role playing games that have most noticeable interaction with players based on quest system. This approach is expected to extend instant responses, which can be controlled behind all of anti-main behavior pattern and main behavior pattern in game playing. Therefore, such study is meaningful that is proposed the analysis framework of player's emotion factors to design game playing capability in game interactions.