• Journal of Korean Society of Steel Construction
• /
• v.16 no.5 s.72
• /
• pp.555-564
• /
• 2004

Steel materials, which are normally used in bridge structures, are prone to corrosion and have thin plate structures. Steel bridges that have been damaged through increased vehicle load and corrosion are frequently expected to be strengthened. Repair or strengthening methods generally include cutting, bolting, and welding. The basic characteristics of stress and deformation behavior generated by cutting and welding in the course of the repair work, however, are not yet understood. It is difficult to say whether the safety of the structure after welding conforms with existing safety evaluation methods.Therefore, to gain confidence in the material and to guarantee the safety of the structure after welding, the stress generated by heat, through welding and cutting, was generalized. The effect of additional loads with respect to stress generated by heat was also investigated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.132-141
• /
• 2000

In this paper, we proposed the MAC protocol of APON supporting multi-class traffic such as CBBUVBR, ABR, UBR, to guarantee the required QoS of each service. For this, we analyze the performance of variousrequest mechanisms and employee the different request mechanism for each traffic classes. Upstream anddownstream frame structures to minimize transmission overhead are proposed based on our request mechanism.The proposed MAC protocol applies the different priority to permit distribution process. CBBWBR traffic, withthe stringent requirements on CDV or delay, is allocated prior to any other class. ABR traffic, which hasnon-strict CDV or delay criteria, uses flexibly the available bandwidth but ensures a minimum cell rate (MCR).UBR traffic is allocated with lowest priority for the remaining capacity. The performance of proposed protocol isevaluated in terms of transfer delay and 1-point CDV with various offered load. The result of simulation showsthat the proposed protocol guarantees the required QoS of the corresponding category, while making use of theavailable resources in both an efficient and dynamical way.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.661-670
• /
• 2020

The purpose of this study was to investigate the incidence of sports injury and trend of incidence pattern of national judo athletes. The research method was analyzed based on the records of all injuries experienced by national judo athletes during training and competition for 9 years from 2008 to 2016. A total of 20,345 sports injuries requiring physical therapy were 10,768 (52.93%) for women, 9,577 (47.07%) for men, lower extremities 9,688 (47.62%), upper limbs 5,807 (28.54%), and trunk 4,850 (23.84%) and knee-related injuries (27.82%) occur more frequently than other injuries. Shoulders, feet and back were more frequent in male athletes, and ankle, neck and hand injuries were more common in female athletes. Using the binomial trend line, the trend of the decrease of sports injuries in each area was shown. However, infrequent injuries such as hands and hips tend to increase gradually. The results of this study are expected to be used as a training program for judo athletes' sports injury and basic data.

• Annual Conference on Human and Language Technology
• /
• 1999.10e
• /
• pp.462-469
• /
• 1999

본 연구에서는 시각적으로 제시되는 단어 자극의 의미 관련성의 차이에 따라 좌우반구의 처리가 어떻게 이루어지는지 알아보고자 하였다. 이를 위해서 명칭성 실어증 환자와 정상인 대학생 피험자를 대상으로 점화 어휘판단 과제를 수행하였다. 이 연구의 기본 논리는 명칭성 실어증 환자의 왼쪽 뇌가 손상되어 있기 때문에 어떤 정보처리가 왼쪽 뇌에서 일어나는 것이라면 정상인과 명칭성 실어증환자간의 수행에서 어떤 차이가 나타날 것을 기대되는 반면, 만일에 우뇌에서 처리되는 것이라면 정상인의 과제 수행 형태와 명칭성 실어증 환자의 것이 일치하는 형태를 보일 것이라는 것이다. 실험 1에서는 수직적 범주관련성이 어느 반구에서 정보처리 되는지를 조사하였다. 그 결과 정상인은 좌반구에서 유의미한 점화효과가 있고 우반구에서는 점화효과가 없었던 반면에, 명칭성 실어증 환자는 정상인과 정반대의 점화 효과를 보이고 있다. 이러한 결과는 좌반구가 일차적으로 수직적 범주 관련성 정보처리와 관련이 있음을 시사해 준다. 또한 수평적 범주 관련성에 따른 실험 은 정상인과 환자 두 집단 모두 수평적 범주관련성이 우반구에서 처리되는 유사한 패턴을 보여주었다. 실험2에서는 연합적 범주관련성에 따른 두 집단간의 점화 효과를 비교하였다. 정상인 집단과 환자 모두 좌우반구에 점화효과를 보여주고 있지만, 정상인 집단의 경우에는 우반구에서, 환자는 좌반구에서 점화량이 더 컸다. 연합관련 정보처리는 좌우반구 모두에서 일어난다고 하는 기존의 견해와 관련하여 볼 때 연합관련 정보처리는 좌우반구에서 일어난다고 해석할 수 있을 것이다. 명칭 실어증 환자의 정보처리는 정상인과 다르게 이루어지므로 이러한 좌우반구에서의 차이가 난 것으로 볼 수 있다. 이상의 실험1과 2의 결과를 종합해 보면, 시각적으로 제시되는 단어의 범주적 관련성이 주는 어휘정보 처리는 반구에 따라 처리하는 기능이 다르다고 결론 내릴 수 있다. 즉, 좌반구는 수직적 범주 관련성을 담당하고 우반구는 수평적 관련성을 담당하며, 연합적 관련성은 좌우반구 모두에서 정보처리 된다는 것이다.

• PNF and Movement
• /
• v.14 no.2
• /
• pp.67-74
• /
• 2016

Purpose: The purpose of this study was to prove the effects of coordinative locomotion training (CLT) on walking speed, walking endurance, and balance for incomplete spinal cord injury patients. Methods: Ten subjects were randomly assigned to the CLT group (n = 5) and the treadmill (TM) group (n = 5). The CLT group performed PNF pattern exercise using the motions of the sprinter and skater for 30 minutes, while the TM group performed using a treadmill for 30 minutes. Both groups performed these therapeutic interventions for five days per week, for a period of four weeks. A 10 meter walking test, Berg Balance Scale (BBS), and 6 meter walking test were used for the assessment of gait speed, balance, and gait endurance. The SPSS Ver. 18.0 statistical program was used for data processing. A Wilcoxon signed rank test was used for the comparison of pre- and post-intervention performance and a Mann-Whitney test was used for comparison between the groups. The significance level for the statistical inspection was set at 0.05. Results: Both groups showed significant improvements in the 10 meter walking test, Berg Balance Scale, and 6 meter walking test (P < 0.05). Conclusion: CLT had an effect on the improvement of walking speed, walking endurance, and the balance of incomplete spinal cord injury patients. Thus, we suggest that CLT is a therapeutic intervention for incomplete spinal cord injury patients.

• Korean Journal of Optics and Photonics
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2017

A method for inspecting defects in display substrates utilizing Fourier optics is proposed in this paper. A cost-effective inspection system can be realized with the proposed method, because it does not require a high-magnification microscope. Also, the proposed method can avoid tight tolerance for variations in displacement between substrate and camera, which is stems from shallow depth of field of the high-magnification microscope. In addition, possible damage caused by collisions between substrate and the inspection equipment can be avoided. The decision algorithm can be simpler than for a conventional inspection system, because spatial shift of periodic substrate patterns does not affect the intensity distribution of the diffracted light, by the Fourier transform property. The proposed method is explained with numerical studies, and experiments are carried out to check its feasibility for color-filter substrates of a liquid-crystal display.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.11-11
• /
• 2003

전자현미경내에서 일부 무기 및 금속 시료들은 전자빔 조사에 의해 시료구조가 손상되거나 비정질화 또는 상전이 등과 같은 구조전이 현상들을 겪게 된다. 즉, 전자빔 조사에 의해 시료는 원자간 결합이 끊어져 나타나는 Knock-on damage, 시료 원자 주위의 전자들과의 상호 작용에 의해 나타나는 Ionization damage, 빔 에너지의 시료온도 상승 기여에 의한 Radiolysis damage 등의 현상들을 경험하게 된다. 이러한 현상은 전자현미경의 가속전압, 전자밀도, 시료 조건 등에 따라 그 지배기구가 다르며 동일한 시편이라도 시료의 두께와 시편온도를 결정하는 전자빔 조사선량에 따라 그 양상과 전이 속도가 달라진다. 본 연구에서는 전자빔 조사에 의해 구조 전이를 겪게 되는 대표적 무기수화물의 하나인 Cibbsite에 대해 전자빔 조사효과에 대한 정량적 고찰을 에너지 여과 투과전자현미경 (EF-TEM)을 이용하여 시도하였다. 전자빔 조사는 120분까지 실시하였고 각 시간별로 에너지 필터와 Imaging plate를 이용하여 Gibbsite의 회절패턴과 미세조직 변화를 기록하였다 빔조사 시엔 illumination angle을 1.25mrad(Dose rate : 334 × 10³ e/sup -//sec·n㎡)으로 하였으며 사진기록 시엔 최소 illumination angle인 0.04mrad(Dose rate : 413 e/sup -//sec·n㎡)을 사용하였다. 시료의 관찰방향은 [001]방향이고 관찰시료두께는 약 50nm로 평가되었으며 시료의 화학변화는 EDS를 이용하여 분석하였다. 회절자료의 Intensity는 ELD/CRISP 프로그램을 이용하였으며 빔조사선량은 평행조사빔이 시료와 상호 작용하는 면적과 상호작용하지 않을 때의 빔을 회절모드에서 faraday cup으로 측정한 빔전류로 부터 계산하였다. Gibbsite에 대한 전자빔 조사 시 1분 이내에 급격한 Hydroxyl Ion(OH-)의 이탈로 인해 Cibbsite의 구조는 거시적 비정질화가 되며 시간증가에 따라 χ-alumina → ν-alumina → σ-alumina or δ-alumina의 순으로 상전이를 겪는다. 전자빔 조사 시 관찰된 회절자료의 가시적 변화를 통해 illumination angle 1.25mrad(Dose rate : 334 × 10³ e/sup -//sec·n㎡)일 경우 약 3초 이내에 비정질화가 시작됨을 알 수 있었고 이는 약 1 × 10/sup 6/ e/sup -//sec·n㎡ 의 전자선량에 해당되며 이를 기준으로 각각의 illumination angle에 대한 임계전자선량을 평가할 수 있었다. 실질적으로 Cibbsite와 같은 무기수화물의 직접가열실험 시 전자빔 조사에 의해 야기되는 상전이 영향을 배제하고 실험을 수행하려면 illumination angle 0.2mrad (Dose rate : 8000 e/sup -//sec·n㎡)이하로 관찰하고 기록되어야 함을 본 자료로부터 알 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.62-67
• /
• 2010

Our research group has investigated that RFID tag packaging development and RFID tag flip chip bonding method influences on the industry-environmental customized RFID tag development that has applications to various industry environmental conditions. RFID tag flip chip bonding is consisting with wire bonding, ultrasonic bonding, heat plate bonding, and laser bonding and those methods are also depending on the different RFID tag development. Our research data shows that, among the various industrial environments such as an extremely high temperature, cryogenic, high-humidity, flexible, high-durable, development of RFID tag in an extremely high temperature is inappropriate for laser bonding method, converting of heat energy as absorbing light energy or heat plate bonding method of straight heat transferring manner, on the other hand, is suitable for wire bonding method which directly connect bump to pattern using wire.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.1
• /
• pp.25-34
• /
• 2010

Fretting damage reduces fatigue life of the material due to low amplitude cyclic sliding and changes in the contact surfaces of strongly connected machine and structures such as bolt, key, fixed rivet and connected shaft, which have relative slip of repeatedly very low frequency amplitude. In this study, the fretting fatigue behavior of 7050-T7451 aluminum alloys used mainly in aircraft and automobile industry were evaluated. The plain fatigue test and fretting fatigue test under cyclic bending load carried out commercial bending fatigue tester and specially devised equipments to cause fretting damage. From these experimental work, the following results obtained: (1) The plain fatigue limit for stress ratio R=-l was about 151MPa. (2) In case of fretting fatigue, fatigue limit for stress ratio R=-l about 72MPa, the fatigue limit for R=0 about 81MPa, and the fatigue limit for R=0.3 about 93MPa. (3) The fatigue limit reduction rates by the fretting damage were about 52%(R=-1), 46%(R=0) and 38%(R=0.3) respectively. (4) The fatigue limit reduction rate decreased with stress ratio increase. In fretting bending test, as stress ratio increased, occurrence of initial oblique crack by fretting decreased or phased out, so that fracture surfaces were formed by plain fatigue crack occurrence, and such tendency was notable as stress amplitude increased. (5) Tire tracks and rubbed scars were observed in the fracture surface and contacted surface.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.4
• /
• pp.17-23
• /
• 2002

The more productive and stable fabrication can be obtained by applying chemical mechanical polishing (CMP) process to shallow trench isolation (STI) structure in 0.18 $\mu\textrm{m}$ semiconductor device. However, STI-CMP process became more complex, and some kinds of defect such as nitride residue, tern oxide defect were seriously increased. Defects like nitride residue and silicon damage after STI-CMP process were discussed to accomplish its optimum process condition. In this paper, we studied how to reduce torn oxide defects and nitride residue after STI-CMP process. To understand its optimum process condition, We studied overall STI-related processes including trench depth, STI-fill thickness and post-CMP thickness. As an experimental result showed that as the STI-fill thickness becomes thinner, and trench depth gets deeper, more tern oxide were found in the CMP process. Also, we could conclude that low trench depth whereas high CMP thickness can cause nitride residue, and high trench depth and over-polishing can cause silicon damage.