• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.3
• /
• pp.703-713
• /
• 2015

The linking system between the control system and the field devices in the existing EMS/SCADA, in order to increase the reliability of the data, and access control through the separation of external network. Currently, There is a tendency that the need for connection to an external network that takes into account the economic aspect, systematic management and efficiency of operations is increasing. Such is evolved linkage section, is to have more security vulnerabilities than in the past, Eventually communication EMS/SCADA linkage section requires special management method. In this paper, taking into account the domestic environment, were presented the security Certification and Accreditation technology that was applied to serial DNP3 and TCP/IP based DNP3 that are mainly used in EMS/SCADA linkage section. Presented to security of Certification and Accreditation technology, divided into Resource Robustness Test and Malicious Packet Test for evaluate the safety. Each of the security requirements and evaluation method in proposed technology, is an attempt to present the differentiation of the existing Certification and Accreditation technology.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.3
• /
• pp.135-142
• /
• 2017

DDoS (Distributed Denial of Service) exhausts the target server's resources using the large number of zombie pc, As a result normal users don't access to server. DDoS Attacks steadly increase by many attacker, and almost target of the attack is critical system such as IT Service Provider, Government Agency, Financial Institution. In this paper, We will introduce the CNN (Convolutional Neural Network) of deep learning based real-time detection system for DNS amplification Attack (DNS DDoS Attack). We use the dataset which is mixed with collected data in the real environment in order to overcome existing research limits that use only the data collected in the experiment environment. Also, we build a deep learning model based on Convolutional Neural Network (CNN) that is used in pattern recognition.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.830-835
• /
• 2016

With the relaxation of regulations on unmanned aerial vehicles (UAVs) in the USA, the development of related industries is expected. Hence, it is anticipated that the number the UAVs will reach approximately 600,000 in the USA in 2017. However, automated flights of commercial UAVs are restricted owing to concerns about accidents. To deal with the possibility of collisions, several studies on collision prevention and the routing of UAVs have been conducted. However, these studies do not deal with various situations dynamically or provide efficient solutions. Therefore, we propose a centralized routing method for the UAV that uses vehicular networks. In the proposed scheme, vehicular networks regard UAVs as data packets to be routed. Accordingly, the proposed method reduces UAV processing power required for route searches. In addition, the routing efficiency for UAV flight paths can be improved since congestion can be minimized by using a vehicular network.

• Journal of Convergence for Information Technology
• /
• v.10 no.1
• /
• pp.22-27
• /
• 2020

With the deployment of 5G infrastructure, content delivery network (CDN) will be a key role to provide explosive growing services for the independent media and YouTube which contain high-speed mobile contents. Without a local cache, the mobile backhaul and fronthaul should endure huge burden of bandwidth request for users as the increase number of direct accesses from contents providers. To deal with this issue, this paper fist presents both fronthaul solutions for CDN that use dark fibers and a passive optical network (PON). On top of that, we propose the aggregated content request specialized for PON caching and evaluate and compare its performance to legacy schemes through the simulation. The proposed PON caching scheme can reduce average access time of up to 0.5 seconds, 1/n received request packets, and save 60% of backhaul bandwidth compared to the no caching scheme. This work can be a useful reference for service providers and will be extended to further improve the hit ratio of cache in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.98-107
• /
• 2011

In this paper, we propose the location determination system of an agent mobile device using the information provided by the WLAN(Wireless LAN) infrastructure. This system is configured as a typical ESS(Extended Service Set)-type WLAN structure with real-time location positioning engine and thru AP(Access Point) controller. The positioning engine collects the information of agent devices using SNMP(Small Network Management Protocol) thru AP controller and utilize those information as Cell ID. for LBS(Location Based Service). In the result of a real office environment implementation, the average success rate of inter-AP roaming is measured to 62.5% and the duration time of the device information update within the AP is average of 11 second of time, which means this system is adaptable to the location based service of above average accuracy but somewhat less urgency.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.137-144
• /
• 2007

Advances in networking technology digital media, and codecs have made it possible for the Internet evolves into a Broadband convergence Network (BcN) and provides various services including Voice over Internet Protocol (VoIP) and IPTV over their high-speed IP networks. In order for the Internet to make a profit as traditional Public Switched Telephone Network (PSTN), it must provide high qualify VoIP services. Therefore, real time qualify measurement framework is the most important requisite to provide VoIP service. For this, IETF (Internet Engineering Task Force) defined RTCP-Extended Reports (RTCP-XR) that extend RTCP (Real-Time Transport Protocol Control Protocol). However, procedure and method tot actually VoIP qualify measurement did not recommended nothing but defined item to measure voice quality. Our objective in this paper is to describes a practical measuring framework for end-to-end QoS of switched voice packet in an IP environment. It includes concepts as well as step-by-step procedures for measuring packetized voice streams. It also proposes new formats that extend RTCP-XR's concept.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.133-140
• /
• 2020

The IISS(Integrated Interface Storage System) software uses communication methods such as DSS(Data Sharing Service), UDP to perform the function of sending all messages from the Combat Management System to the analytical computer. Because IISS software handles all message used in the Combat Management System, the source code is large and has a highly dependent feature on message changes. Modification of software is a task that requires a lot of labor, such as series of software reliability test. so research has been conducted to reduce software development costs, including minimizing software modifications. In this paper, We study the method of messages receiving and architectural structure improvement to minimize reliance on message changes in the Combat Management System and improve the modifiability. Reduced message dependency by changing the way DSS and UDP protocols are communicated to Packet Sniffing. In addition, Factory Method Pattern were applied to improve the software design. Test comparing existing software and development elements have confirmed that the software has improved its modifiability and reuse.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.137-148
• /
• 2012

In this paper, we proposed the location-aware coordinate routing algorithm for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. The x, y and z coordinate axes from divided address space of 16 bit to solve this problems. However, coordinate routing does not take account of wireless link condition. If wiress link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose the location-aware coordinate routing algorithm considering wiress link condition, where reliable data transmission is made and the consumed enegy is minimize. and we compared and connected region and transition region of ZigBee location based routing in the aspect of average number of multi hops, subordinate packet delivery ratio, delay time, and energy consumption of proposed algorithm. It turned out that there were improvements in performances of each items.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.15-23
• /
• 2002

We present a new MDA-based Mobile-IPv6 multicast routing algorithm for wirelese service operators to offer Mobile-IP over IMT-2000 service under IMT-2000 network by taking advantage of the existing infrastructure for IMT-2000 multimedia application services. The extended IMT-2000 system architectures use an PDSNs (i.e. IWFs), and the home network (i.e. Internet) backbone and intermediate network are composed of ATM entities. A key feature of the new protocol is the use of MDA(Multicast Delivery Agent) to reduce delivery path length of the multicast datagram. We show that proposed protocol is efficient in terms of various performance measures such as multicast traffic load, multicast related handoff, and average routing length when we implement it using the Mobile-IPv6. Particularly, the number of tunneling and average routing length of datagram are reduced relatively, the multicast traffic load is also decreased.

• Journal of KIISE:Information Networking
• /
• v.30 no.6
• /
• pp.755-763
• /
• 2003

To improve performance over noisy wireless channels, mobile wireless networks employ forward error correction(FEC) techniques. The performance of static FEC algorithms, however, degrades by poorly matching the overhead of their correction code to the degree of the fluctuating underlying channel error. This paper proposes an adaptive FEC technique called FECA(FEC-level Adaptation), which dynamically tunes FEC strength to the currently estimated channel error rate at the data link layer. FECA is suitable for wireless networks whose error rate is high and slowly changing compared to the round-trip time between two communicating nodes. One such example network would be a sensor network in which the average bit error rate is higher than $10^{-6}$ and the detected error rate at one time lasts a few hundred milliseconds on average. Our experiments show that FECA performs 15% in simulations with theoretically modeled wireless channels and in trace-driven simulations based on the data collected from real sensor networks better than any other static FEC algorithms.