• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.2
• /
• pp.101-109
• /
• 2002

The aluminum honeycomb sandwich panel (AHSP) structure not only have high flexural rigidity and strength per density but also excellence in vibration and noise properties. The AHSP structure are very useful for railway, airplane and high speed ship which need lighter-weighted and more strengthened elements. In this paper, from comparison the AHSP with the equivalent aluminum single plate (EASP) structure on the result of analysis, it was shown that the AHSP is S times lighter weight to the same stiffness than the EASP. And the AHSP structure have high bending rigidity and small shear rigidity in the direction of the thickness. Also, to the characteristics of vibration for the AHSP and EASP, which the stiffness is larger than the EASP, are higher than EASP.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.4
• /
• pp.687-710
• /
• 2016

This study aims to empirically estimate distributed lag effects of expenditure by type of R&D on scientific publication in the national R&D program. To analyze the lag structure between them, we used a dataset comprised of panel data from 104 technologies categorized by 6T (IT, BT, NT, ST, ET, CT) from 2007 to 2014, and employed multiple regression analysis based on the polynomial distributed lag model. This is because it is highly likely to emerge multicollinearity, if a distributed lag model without special restrictions is applied to multiple regression analysis. The main results are as follows. In the case of basic research, its lag effects are relatively evenly distributed during four years. On the other hand, the applied research and experimental development have distributed lag effects for three years and two years respectively. Therefore, when it comes to analyzing performance of scientific publication, it is necessary to be performed with characteristics of the time lag by type of R&D.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.22-27
• /
• 2006

In this paper, we propose a method that can generate a computer-generated hologram (CGH) from the depth stream and color image outputs provided by an active sensor add-on camera. Distinguished from an existing holographic display system that uses a computer graphic model to generate CGH, this method utilizes a real camera image including a depth information for each object captured by the camera, as well as color information. This procedure consists of two steps that the acquirement of a depth-annotated image of real object, and generation of CGH according to the 3D information that is extracted from the depth cue. In addition, we display the generated CGH via a holographic display system. In experimental system we reconstruct an image made from CGH with a reflective LCD panel that had a pixel-pitch of 10.4um and resolution of 1408X1050.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.255-260
• /
• 2014

A new sustain driving waveform and its implementation method is proposed to improve the gray scale linearity by applying the sustain waveform for producing the strong and weak discharge in AC plasma display panel. The driving method to express the gray scale of AC PDP is the combination of the several subfield in one TV frame, and the luminance of the each subfield is decided by the number of the sustain pulses. As the same amount of the strong plasma discharge is produced when the sustain pulses are applied during a sustain period, it looks easy to express the linear gray scale ideally. However, it is difficult to express the real linear gray scale due to the production of the address and first sustain discharge irrelevant to gray scale expression in every subfleld. Therefore, a new sustain driving waveformis adopted to produce partially the weak discharge instead of the strong discharge by the modification of the sustain pulses shape during the sustain period and the gray scale expression is close to the linearity.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.1
• /
• pp.38-47
• /
• 2007

The initiation of fatigue cracks in a simulated aircraft structure with a series of rivet holes was detected by acoustic emission(AE), then the crack length was determined by surface acoustic wave(SAW) technique. With the initiation and growth of fatigue cracks, AE events increased intermittently to form a stepwise incremental curve of cumulative AE events whereas the crack length increased more or less monotonically. With the SAW technique employed, the crack sizing for 13 different cracks including some short cracks was performed. With the reference to the measurement by traveling microscope, cracks in the range of $1{\sim}8mm$ long were reliably sized by the SAW technique. Although it was impossible to size the short fatigue cracks in the range shorter than 1 mm, the SAW technique still appeared practically useful for a range of crack lengths often found in aircraft structures.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.315-321
• /
• 2005

Chip-on-glass technology to attach IC chip directly on the glass substrate of flat panel display was studied by using induction heating body in AC magnetic field. With applying magnetic field of 230 Oe at 14 kHz, the temperature of an induction heating body made with Cu electrodeposited film of 5 mm${\times}$5 mm size and $600{\mu}m$ thickness reached to $250^{\circ}C$ within 60 seconds. However, the temperature of the glass substrate was maintained below $100^{\circ}C$ at a distance larger than 2 mm from the Cu induction heating body. COG bonding was successfully accomplished with reflow of Sn-3.5Ag solder bumps by applying magnetic field of 230 Oe at 14 kHz for 120 seconds to a Cu induction heating body of 5mm${\times}$5mm size and $600{\mu}m$ thickness.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.336.1-336.1
• /
• 2014

대표적인 TCO 물질인 ITO는 디스플레이 패널이나 태양 전지 등과 같은 소자에 널리 사용되고 있다. 최근에는 대량생산 및 대면적화, 그리고 유연 디스플레이 응용을 위해 롤투롤 스퍼터링(roll to roll sputtering) 공정을 이용하여 플라스틱 기판에 ITO박막을 증착하여 ITO 필름을 제작하고 있다. 롤투롤 방식으로 ITO 필름의 제작 시 공정 변수에 따라 ITO 박막의 전기적 광학적 물성 변화가 매우 크기 때문에, 공정 변수에 따른 ITO 박막의 전기적, 광학적 특성 변화에 대한 연구의 필요성이 매우 높아지고 있다. 따라서 본 연구에서는 롤투롤 스퍼터링 방법으로 PET 기판 위에 다양한 조건으로 ITO 박막을 증착하여 공정변수에 따른 ITO 박막의 물성을 조사 하였다. 이를 위해 ITO (In/Sn=95/5 wt.%) 타겟을 사용하여 DC 파워와 산소 분압비, 열처리 온도 등을 변화시켜 낮은 면저항과 높은 광투과도를 가지는 최적의 ITO 증착 조건을 찾은 후 ITO 박막을 PET 기판 위에 두께 별로 증착 하였다. ITO 박막의 두께와 열처리 온도에 따른 전기적 특성은 면저항 측정기와 홀 측정 장치를 이용하여 분석하였고, 분광광도계와 탁도 측정기를 이용하여 광학적 특성을 관찰하였다. 또한, GIXD를 이용하여 이들 박막의 구조와 결정성에 대한 조사를 수행하였다. 이 결과들로부터 산소 분압비에 따른 ITO/PET 박막의 저항 특성 변화와 ITO 박막의 두께와 열처리 온도에 따른 구조적, 전기적, 광학적 특성을 조사하여, 롤투롤 스퍼터링법에서 공정 조건에 따른 ITO/PET 필름의 물성변화를 보고하고자 한다.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.42-48
• /
• 2016

Although the generation of waste flat panel displays in Korea is expected to exceed one million sets in 2016, a comprehensive recycling technology has not yet been developed for effective recovery of valuable materials from the wastes, rendering to outshine the national prestige as a global leader in display industries. The overall aim of this study was to analyze the statistical data of various valuable materials and their ratio after dismantling 40-inch and 42-inch sized waste LCDs. The analysis results showed that plastic portion of the wastes was about 22% and the portion of PCB (Print Circuit Board) part was about 9% by weight whereas panel part was about 34% and leftovers including metals totalled about 35% by weight. Based on the analytical results, a higher value recycling process could be proposed with advanced material separation techniques.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.283-290
• /
• 2020

The purpose of this study was to investigate the potential causal relationship between unmet healthcare needs and metrics related to quality of life. To examine the relationships between these variables, the study conducted an analysis by processing additional irradiated raw materials of the Korean Medical Panel. The metrics related to quality of life included six variables: athletic ability, self-care, daily activities, pain/trouble, uneasiness/depression, and subjective health conditions. Linear regression analysis revealed that the unmet healthcare needs had statistically significant negative effects on all six quality of life variables. A review of the magnitude of the linear regression β values for those variables showed that the relative level of influence on the quality of life variables decreased in the following order: pain/trouble, subjective health conditions, uneasiness/depression, daily activities, athletic ability, and self-care. Based on the results, practical applications related to strengthening working-level links between health and welfare is considered an effective policy response to the continued presence of unmet healthcare needs; such applications could contribute to improving the quality of life of those with unmet healthcare needs.

• The Korean Journal of Applied Statistics
• /
• v.26 no.3
• /
• pp.375-387
• /
• 2013

Unit non-response of surveys reduces the efficiency of the estimates and also causes non-response bias especially when there is large difference between respondents and non-respondents. Non-response weighting adjustments have usually been used to compensate for non-response. It is not easy to examine the non-response bias as well as to obtain information on the non-respondents in sample surveys. A household panel survey, called The Survey of Household Finances, was conducted in both 2010 and 2011. In this paper, we assume that non-response households in Wave 2 have strong non-response (non-cooperative) tendency. We classify those households into non-response households in Wave 1. Under this assumption, the characteristics of non-response households, the non-response bias and the effect of non-response adjustments are investigated.