• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.198-204
• /
• 2005

Fluosilicate salts based hydration heat reducer(SWP-HR), used in this study, is composed of fluosilicate salts, soluble silica, aromatic polymer condensate and nitrate salt based inorganic compound with latent heat property. Effects of SWP-HR addition on the hydration heat and anti-crack property of cement mortar were investigated. Adiabatic hydration temperature and drying shrinkage length of SWP-HR added cement mortar had a tendency to decrease compared to those of cement mortar without SWP-HR addition. Also, it was confirmed through crack pattern experiment of plate-form specimen for elucidating crack-reducing characteristic that anti-crack property of SWP-HR added cement mortar was improved.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.2
• /
• pp.101-108
• /
• 2009

A fretting wear test rig for dry ambient condition, which employs a piezoelectric actuator, has been developed. It is driven and loaded in a very simple manner with acceptable experimental accuracy. By using the rig, Inconel 690 tube has been tested under the normal load of 10 and 15N with sliding amplitude of less than $100{\mu}m$ during $10^6$cycles. The wear resistance of the material has been characterized in terms of the wear coefficient based on the work rate model. SEM micrographs show the complex structures of the scars, which consist of risen peaks, plate-type thin layers and locally exposed bare surfaces. The cracks spread over the layers give clue to the fretting wear mechanism of the material.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.39-46
• /
• 2017

This paper presents the fabrication of ceramic insulation layer on metallic heat spreading substrate, i.e. an insulated metal substrate, for planar type heater. Aluminum alloy substrate is preferred as a heat spreading panel due to its high thermal conductivity, machinability and the light weight for the planar type heater which is used at the thermal treatment process of semiconductor device and display component manufacturing. An insulating layer made of ceramic dielectric film that is stable at high temperature has to be coated on the metallic substrate to form a heating element circuit. Two technical issues are raised at the forming of ceramic insulation layer on the metallic substrate; one is delamination and crack between metal and ceramic interface due to their large differences in thermal expansion coefficient, and the other is electrical breakdown due to intrinsic weakness in dielectric or structural defects. In this work, to overcome those problem, selected metal oxide buffer layers were introduced between metal and ceramic layer for mechanical matching, enhancing the adhesion strength, and multi-coating method was applied to improve the film quality and the dielectric breakdown property.

• Journal of the Korean earth science society
• /
• v.42 no.2
• /
• pp.185-194
• /
• 2021

A lava dome and sheet lava flow can be observed at the seashore of Aewol, Jeju island. The cylindrical lobes are characterized by a concentric structure consisting of a massive core and radial joints. Columnar joints with different thickness between the upper and lower parts are developed in the sheet lava flow around the rock salt field in Goeomri. The upper part of the columnar joints is uneven in shape, and has a diameter of 120-150 cm. The lower part of the columnar joints is hexagonal and pentagonal in shape, and has a diameter of about 60 cm. The cylindrical lobes can be divided into two groups based on size and shape. One is a megalobe, with a semicircular outline and a maximum diameter of 30 m. The other is a circular lobe with a diameter of less than 10 m. The columns in the radial joints have hexagonal and pentagonal cross sections and gradually increasing diameter, outward from the core, to a size of 80-120 cm at the rim. The concentric structure observed in the cylindrical lavas is attributable to a combination of four factors. The first is a circular crack caused by the decrease of the temperature and density difference between the inside and outside of the cylindrical lava flow. The second is a concentric chisel mark of the radial joints, which formed at the same time as the radial joints. The third is a flow band, which is a trace left in a round passage when lava flows through. The fourth is a vesicular band formed in a cave by gas bubbles escaping from the lava flow.

• Journal of the Korean association of regional geographers
• /
• v.10 no.1
• /
• pp.53-66
• /
• 2004

There are various granite landforms including block stream(natural monument No. 435) within Mt. Biseul, in Daegu city. The Daegyunsa(temple) and community of rhododendron around the summit of the mountain provide visitors many objects o( interest in cultural & ecological heritage. This paper aimed to develope nature trails of various type according to visitor's characteristics. 1) Various granite landforms develope along with the main path up the mountain(block stream-gnamma-exfoliation-poligonal cracking-talus-core stone-sheeting joint-tor-free face-high flat summit). 2) The explanatory note on terminology, origin, characteristics of geomorphic resources are developed in this paper for the first time. 3) In Consideration of the path line of flow of visitor, the best field study sites and the most effective nature trails are designed for visitor. 4) Three nature tails are designed for visitor according to the type and the length of visitor's stay.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.236-237
• /
• 2000

용액인상법에 의하여 Cr$^{3+}$ 이온이 0.1-0.2% 주입된 Alexandrite (Cr$^{3+}$ :BeAl$_2$O$_4$) 단결정을 성장하고, 성장한 단결정을 이용하여 레이저 소자를 제조하였다. 고품질의 단결정을 성장할 수 있는 결정성장조건을 규명하고, Cr$^{3+}$ 이온의 유효편석 계수를 계산하였으며, 결정 결함 및 분광 물성을 조사하였다. 결정성장 실험 결과, 유속 3 1/min의 질소분위기, 이리듐 도가니 및 <001>방위의 Alexandrite 단결정을 종자결정으로 사용하여 결정을 성장하는 경우 최적의 결정성장 조건은 인상속도 0.5-1.0 mm/hr와 회전속도 20-25 rpm이었다. 육성된 결정은 (100)면이 넓게 발달되었으며, (120)과 (010)면이 측면에 발달되는 판상의 직팔각기둥의 형태로 성장되었다. 결정결함으로써 parasite crystal의 형성과 경계면의 균열, striation, inclusion 등이 검출되었다. Alexandrite 단결정 내에 분포하는 Cr$^{3+}$ 이온의 유효편석계수 k$_{eff}$는 2.8로 계산되었다. 분광물성으로써 실온에서의 $^4$A$_2$$\longrightarrow$$^4$T$_2$(689.6-489.3 nm), $^4$A$_2$$\longrightarrow$$^4$T$_1$(489.3-311.33m) 천이에 의한 흡수를 확인하고, $^4$T$_2$$\longrightarrow$$^4$A$_2$(650-800 nm), $^2$E$\longrightarrow$$^4$A$_2$에 의한 nophonon line R$_1$, R$_2$(680.4, 678.5 nm) 및 $^2$T$_1$$\longrightarrow$$^4$A$_2$(655.7, 649.3, 645.2 nm)의 형광방출 스펙트럼을 얻었으며, 형광수명은 0.264 ms로 조사되었다. 제조된 레이저 발진봉은 직경 6.3 m, 길이 45 nm이었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.781-785
• /
• 2015

In this study, a newly developed ultrasonic fatigue test was performed for durability assessment of polyoxymethylene engineering plastic, which has a high crystallization rate and degree of crystallization. Fatigue strength of POM (polyoxymethylene) was performed on a piezoelectric UFT developed by Mbrosia Co., Ltd(1), operating at a high frequency of 20 kHz. The test results showed a fatigue limit of 5.0~6.0 MPa under fatigue testing at R = -1, 20kHz; and, electron microscopy revealed the size effect by risk volume and fractured dimple structure after the coalescence of micro-voids through the crazing effect, which occurs during the failure of a polymer.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.766-774
• /
• 1998

32$0^{\circ}C$, 40%NaOH 용액의 autoclave에서 약 300wppm의 탄소를 함유하고 있는 15Cr-9Fe-balanced Ni 합금 판상시편에 대해 응력부식 저항성을 조사하였다. 부식시편은 $700^{\circ}C$, 100시간 동안의 열처리로 합금내부에 석출될 수 있는 가능한 한 많은 양의 크롬계 탄화물을 석출시킨 후, 다시 재용해에 의해 크롬계 탄화물의 형태를 조절하는 $800^{\circ}C$-$950^{\circ}C$범위의 최종열처리를 시행하고 급냉시킨 다음 U-자형으로 응력을 가하여 준비되었다. 최종열처리 온도가 올라감에 따라 시편들의 입계응력부식균열(IGSCC ) 전파속도는 $900^{\circ}C$까지는 거의 직선적으로 증가하다가 $950^{\circ}C$에서는 $700^{\circ}C$에서 얻은 값보다도 더 낮게 감소하였다. 즉, 크롬계 탄화물이 재용해되어 그 밀도가 감소함에 따라 IGSCC저항성이 감소하다가 완전히 재용해된 $950^{\circ}C$ 열처리 조건에서 오히겨 가장 큰 IGSCC 저항성을 나타내었다. 이와같은 최조열처리 온도에 따른 니켈계 합금 600의 부식거동은 입계에 존재하는 크롬계탄화물의 형태변화 때문이 아니라 입계에서 탄소-크롬계 탄화물-크롬간의 상평형에 의해 이루어지는 탄소의 입계편석량이 크롬계탄화물이 존재할 때에는 열처리 온도에 따라 증가하다가 그것이 완전히 재용해 되었을 때 가장 낮아지기 때문인 것으로 생각된다.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.4
• /
• pp.247-259
• /
• 2011

This research aimed to analyse geomorphic resources of Mt. palgong(in Daegu city and Gyeongbuk province) through some field surveys, and then to clarify geomorphic features. The main results are as follows. 1) The geological boundary of the south slope(granite) is more clear than one of the north slope(granite bedrock and metamorphic sedimentary rock). Small basins are along with fault line between granite bedrock and metamorphic sedimentary rock. 2) It is estimated that relatively big valleys on the north slope are due to local climate, geomorphic and geological features. 3) Tor, sheeting joint, gutter are well developed both on the south slope and on the north slope, however the development of polygonal cracking and boulder stream are more dominant on the south slope; river cliff, pool, waterfall are more dominant on the north slope with valleys that well developed. 4) Scenic geomorphic landscapes are mainly developed in Dongsan valley and Chisan valley on the north slope. 5) There are many interesting geomorphic resources in the viewpoint of storytelling in Mt. Palgong. So the specific design to utilize such resources is required

• Economic and Environmental Geology
• /
• v.29 no.4
• /
• pp.421-428
• /
• 1996

The occurrence, optical property, chemical composition, crystal structure and formation environments of the phillipsite within deep-sea manganese nodules were systematically investigated in this study. Phillipsite in manganese nodules occurs in nucleus of nodules along with consolidated bottom sediments, weathered volcanic debris, and interstitial grains in the each layer of manganese encrusts. Phillipsite is predominantly pseudomorphs of volcanic shards, and occurs as white to pale yellow in color lath-shaped and equant crystals. These show aggregations of prismatic, blocky, and bladed of 2 to $20{\mu}m$ long, and 2 to $5{\mu}m$ thick. The simplified average chemical formula of phillipsite is $({Ca_{0.1}Mg_{0.3}Na_{1.1}K_{1.5}})_3{(Fe_{0.3}Al_{4.2}Si_{11.8})O_{32}{\cdot}10H_2O}$ with a very siliceous and alkalic. The $Si/(Al+Fe^{+3})$ ratio is 2.37 to 2.78 and alkalis greatly exceed the divalent exchangeable cations, and Na/K ratio is 0.59 to 0.81. The phillipsite is monoclinic ($P2_l/m$) with the unit-cell parameters, $a=10.005{\AA}$, $b=14.129{\AA}$, $c=8.686{\AA}$, ${\beta}=124.35^{\circ}$, and $V=1013.6{\AA}^3$. Phillipsites in manganese nodules formed apparently authigenically at a temperature less than $10^{\circ}C$, and they crystallized at a pressure of less than 0.7 kb, and pH of about 8 in deep-sea environments.