• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.100-101
• /
• 2000

편광기는 광변조기나 스위치 등과 같이 구동을 위해 하나의 편광성분을 요구하는 소자를 동작시킬 때 필수적으로 요구되는 소자이다. 편광기를 구현하는 기법에 따라 벌크형, 집적광학형 그리고 광섬유형으로 구분할 수 있다. 광섬유형은 광섬유를 절단하지 않고 제작이 가능하여 삽입손실이 작고 높은 기계적 신뢰성을 가진다. 측면 연마된 광섬유(side-polished fiber)위에 복굴절 크리스탈$^{(1)}$ , 액정크리스탈$^{(2)}$ , 금속막$^{(3)}$ , 그리고 복굴절을 가지는 평면도파로$^{(4)}$ 를 결합한 구조가 잘 알려져 있다. 특히 광섬유-평면도파로 결합 구조는 원하는 파장에서 TE혹은 TM 편광성분을 선택적으로 제거할 수 있고 평면도파로 물질선택이 용이한 구조이기 때문에 많은 주목을 받아 왔다. 하지만 지금 까지 알려진 광섬유-평면도파로 결합기를 이용한 편광기는 편광선택 작용이 발생하는 파장범위가 좁아 범용적으로 사용하는데 적합하지 않는 점이 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.240-241
• /
• 2003

경계면 근처에서의 에바네슨트파의 상호작용은 입사, 반사 및 굴절된 평면파의 삼중모드로 설명한다. 경계에서 굴절률이 낮은 영역에 위치한 DCM 색소분자에 의한 자발방출은 굴절률이 높은 영역에서 입사된 삼중모드와 굴절률이 낮은 영역에서 입사한 삼중모드와 상호작용을 하며, 광 측정기에서는 이 두 모드의 선형결합을 보게된다. 자발방출에 대한 실험결과는 이러한 이론을 뒷받침 해준다. (중략)

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.441-450
• /
• 2006

The on-land seismic survey in Korea was begun in mid-1960s. Kim et al.(1967) of Korea Geological Survey reported on the result of gravity and seismic reflection surveys conducted in the Pohang area for the period of 1963-64 to assess its possibility of oil entrapment. Hyun and Kim (1966) carried out a refraction survey on the tunnel wall. Since then, the KGS geophysicists had conducted seismic surveys on Kyungsang sedimentary basin as a main project for several years. In 1970s, on-land seismic surveys had been conducted for various purposes such as site investigation for the nuclear power plants and industrial complex, exploration for ground water, mineral resources and underground tunnel. The first reflection survey with CMP acquisition was attempted in 1978 by using a digital recording system. But most of on-land seismic surveys had employed the refraction method until 1980s. In 1990s, high resolution reflection and various borehole seismic surveys such as tomography, uphole, downhole, cross-hole methods have been attempted by universities and engineering companies. The applications of on-land seismic surveys have been enlarged for both academic and industrial purposes such as investigation of geologic structure of the fault and tidal flat area, construction of highway, railroad and dam, geothermal energy and mineral resource exploration, environmental assessment for waste disposal sites and archaeological investigations. In 2002, the first crustal seismic survey was carried out on the profile of 294km length across the whole peninsular. It is expected that the advanced technology and experience acquired through offshore seismic surveys, which have been conducted in continental shelf of Korea and foreign oil fields, will stimulate the more active on-land seismic explorations.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.5
• /
• pp.217-222
• /
• 2018

An analytical method for determining the degree of wave refraction is investigated. The ray tracing method previously used to calculate wave propagating cannot explain the degree of refraction caused by different kinds of conditions. In this study, we suggest the index of refraction degree using the principle that refraction is caused by the difference of phase velocities along the crest line.

• Geophysics and Geophysical Exploration
• /
• v.20 no.1
• /
• pp.43-48
• /
• 2017

The applicability of refraction survey has been tested using a wave glider widely used in long-term ocean observations around the world. To record seismic refractions, a single channel streamer with metal weight and a seismic recording system were mounted on the wave glider. We used GPS precise time synchronization signal and radio frequency (RF) communication to synchronize shot and recorder triggers and to control acquired data quality in real time. When the wave glider is positioned close to the set point, a 2,000 J sparker is exploded along the designed track at 2 second intervals. Through the test survey, we were able to successfully acquire refractions from the subsurface.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.1-4
• /
• 2001

Via terahertz (THz) reflection radar, the characterizations of reflected THz electromagnetic pulses are reported. Quasi-optical techniques are used to efficiently reflect pulses of THz electromagnetic radiation from an aluminum mirror and several conducting and nonconducting materials. An incident THz pulse is reflected up to 9 times to know the magnitude change of a reflected pulse from the aluminum mirror. Using this method, aluminum board, undoped silicon, quartz, and LDPE samples' reflection coefficient and index of refraction can be measured. These results suggest a possible application of transient THz reflection spectroscopy without surface contact.ontact.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.174-175
• /
• 2000

1946년 S M MacNeille에 의해 연구된 유전체 다층 박막을 이용한 편광광속분리기는 브르스터 각 편광광속분리기(Brewster angle polarizing beam splitter) 혹은 맥닐 프리즘(MacNeille prism)으로 알려져 있으며 지금도 많은 광학계에서 사용되고 있다. 맥닐 프리즘은 두 개의 프리즘 사이의 빗면에 높은 굴절률( $n_{H}$ )을 갖는 물질과 낮은 굴절률( $n_{L}$ )을 갖는 물질을 λ/4 광학두께로 교번으로 한 고반사 다층박막 구조를 갖는다. 각 층의 경계면에서 브르스터 각으로 입사할 경우 p-편광파는 투과하고 s-편광파는 부분적으로 반사한다. 편광광속분리 정도는 p-편광파와 s-편광파의 투과율( $T_{p}$, $T_{s}$ ) 혹은 반사율( $R_{p}$, $R_{s}$ )의 비로 나타내며 이를 소광비(extinction ratio)라 한다. (중략)(중략)략)

• Water for future
• /
• v.21 no.4
• /
• pp.334-338
• /
• 1988

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.78-84
• /
• 2008

Recent earthquakes near nuclear power plants in Korea have triggered public concerns about possible seismicity of the Ulsan Fault Zone in the south-eastern part of the Korean peninsula. To reveal subsurface structures of this fault zone, we conducted high-resolution seismic refraction and reflection surveys, and closely spaced gravity measurements in the Dongchon River valley north of Ulsan, Korea. Here alluvium covers the north-south trending fault zone in a 1-km wide valley. Both source points and receivers were spaced at 5-m intervals for the 24-channel seismic refraction and reflection methods, along two profiles of 835 m and 415 m length. Gravity data were also measured along these profiles at 131 stations using a 10-m interval. Synergetic interpretation of seismic refraction, high-resolution seismic reflection, and gravity surveys across the valley indicates that the Ulsan Fault Zone was formed by apparent north-south strike-slip motions during the Cretaceous, and that some faults may have been reactivated by east-west compressional or transpressional stresses during the Tertiary or Quaternary.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.4
• /
• pp.371-378
• /
• 1992

In this paper we report the fabrication of a planar optical wavehuide lens on a Y-cut LiNbO3 substrate by Ti_indiffusion and Ti-indiffused proton-exchange(TIPE). LiNbo3 planar waveguides are fabricated and refractive indices of the waveguides are fabricated and refractive indices of the waveguides are measured. Based on the measured indices, palanr waveguide lenses are designed and fabricated. The measured focal point and spot size of the fabricated lens are in good agreement with those of the designed lens.