• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5906-5914
• /
• 2013

Recently in Korea, the policy is being proceeded to build a intergenerational housing on artificial ground of railroad site for utilizing rental house. Due to narrow space of rail road site, suitable method have to be developed such as micropiles which is known as a method of a fast construction. However, If micropile is used as foundations for the super structure, construction cost is increases compared with other pile. Consequently, new concept micropile proposed to improve both bearing capacity and cost efficiency of general micropile. New concept micropile consists of waveform cement grout surrounding tread bar that formed by grouting the soil layer with jet grouting method as control the grout pressure and flow. The micropile with waveform is expected to decrease the construction cost by cut down pile length of general micropile. This paper examined the behavior of the new concept micropile with waveform subjected to axial load using two-dimensional axisymmetric numerical analyses method. According to the numerical result, there will cost effectiveness as the pile displacement decreased despite the length of waveform micropile is down about 5% from a general micropile under the same loading condition. Also, the effect of skin friction force which mobilized from the waveform of micropile appeared at relatively soft ground.

• Proceedings of the KSEE Conference
• /
• 2006.10a
• /
• pp.141-152
• /
• 2006

• Computational Structural Engineering
• /
• v.17 no.4 s.66
• /
• pp.29-34
• /
• 2004

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.83-93
• /
• 2017

A numerical analysis is made of the fluid flow and heat transfer characteristics in the corrugated structure that traps the spent air in the corrugations between impinging jets to reduce crossflow effects on downstream jets in the array. All computations are performed by considering three-dimensional, steady state, and incompressible flow by using the ANSYS-CFX 15.0 code. Averaged jet Reynolds number is 10,000. The oblique angles of impingement jets on the spanwise section are $70^{\circ}$, $80^{\circ}$, $90^{\circ}$, and the oblique angles of impingement jets on the streamwise section are $70^{\circ}$, $90^{\circ}$, $110^{\circ}$. The investigation focuses on the oblique angle influence of impinging jet array on the fluid flow and heat transfer characteristics of a corrugated structure.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.3
• /
• pp.72-82
• /
• 1995

In the present paper, flow characteristics and free surface waves generated by a submerged hydrofoil advancing with an uniform speed are calculated. Using a numerical method based on a MAC(Marker And Cell) method, the Navier-Stokes and the continuity equations are solved to simulate flow fields around the hydrofoil. Computations are carried out in a rectangular grid system in which grids are concentrated near the foil and the free surface to improve numerical accuracies. Viscous flow phenomenas including pressure distributions are computed. Moreover, the influences of submerged depths upon the generated wave profiles and the wave breaking phenomena are also investigated. Experiments are performed at the towing tank of Inha University to measure free surface wave elevations due to the advancing hydrofoil. The computational results are compared with the present and the other available experimental data to show the accuracy of the numerical method developed.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.3
• /
• pp.129-139
• /
• 2004

During the construction of circular underground pipe, the non-proper compaction along the pipe and the decrease of compaction efficiency have been the main problems to induce the failure of underground pipe or facility. The use of CLSM (controlled low strength materials) should be one of the possible applications to overcome those problems. In this research, the small-scaled model test and the numeric analysis using PENTAGON-3D FEM program were carried out for three different cases on the change of backfill materials, including the common sand, the soil from construction site, and the CLSM.. From the model test in the lab, it was found out that the use of CLSM as backfill materials reduced the vertical and lateral deformation of the pipe, as well as the deformation of the gound surface. The main reason for reducing the deformation would be the characteristics of the CLSM, especially self-leveling and self-hardening properties. The measured earth pressure at the surround of the corrugated pipe using the CLSM backfills was smaller than those in the other cases, and the absolute value was almost zero. Judging from the small-scaled model test and FEM analysis, the use of CLSM as backfill materials should be one of the best choices reducing failure of the underground pipes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1429-1433
• /
• 2004

본 연구에서는 쇄파대에서 정현파의 쇄파에 대해 수리모형실험과 수치모형실험을 수행하였다. 수치해석 모형에서는 Reynolds 방정식을 지배방정식으로 사용하고 난류해석을 위해 $k-\varepsilon$모델을 적용하였으며, 자유수면변위를 추적하기 위해 VOF기법을 사용하져다. 사면 및 평탄지형상에서 발생하는 쇄파양상을 서로 다르게 설정하기 위해 수심과 입사파의 주기와 파고를 변화시킨다. 발생된 정현파의 파형은 해석해와 잘 일치하였으며, 입사파와 파고계가 설치된 위치에서 측정된 파고비 $H/H_0$는 관측값과 비교해 본 길과 놀은 정확도를 나타내었다.

• Journal of Korea Water Resources Association
• /
• v.33 no.6
• /
• pp.805-814
• /
• 2000

A numerical model based on the boundary element method is employed to describe diffraction of monochromatic water waves due to varying topographies. The model is firstly verified by comparing obtained reflection and transmission coefficients of waves over a trench to those of the eigenfunction expansion method. The model is then used to investigate the Bragg reflection of waves over sinusoidally varying topographies. Calculated reflection coefficients are compared to available laboratory measurements and semi-theoretical results. A reasonably good agreement is observed.served.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.3
• /
• pp.209-218
• /
• 1995

Nonlinear interaction between directional wave components is theoretically analyzed in deep water. The perturbed solution for an irregular wave is derived accurate up to the third order of the wave steepness and it is shown that the wave characteristics are modulated due to the nonlinear interaction. The convergence rate of the perturbed solution depends on not only wave steepness but also wavelength ratio between wave components. The long-wave component of the perturbed solution converges rapidly. while the short-wave solution converges slowly or diverges. The short wave properties in a broad-band wave spectrum cannot accurately be obtained by the conventional wave-mode method because it fails to properly describe the modulation of short-wave frequency caused by the nonlinear interaction with much longer wave.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.1-9
• /
• 2015

According to national regulations and its commentary, such as Rivers Design Criteria & Commentary (KWRA, 2009), Foundation Structure Guideline and its Commentary(MLTM, 2014 and KGS, 2009), the integrity evaluation of river levee includes slope stability evaluation of both riverside/protected low-land and piping stability evaluation with respect to foundation and levee body along with water level conditions. In this case the design hydro-graph can be the most important input factor for the integrity evaluation, however it is fact that the national regulations do not provide any proper determination methods regarding hydro-graph. The authors thus executed an integrity evaluation of sluice gate in levee by changing each hydro-graph factor, including rising ordinary water level, lasting flood water level, falling water level, and flood frequency, in order to suggest a determination method of reasonable hydro-graph. As a result, the authors suggested that at least over 57 hours of rising ordinary water level and over 53 hours of lasting flood water level should be considered for the design hydro-graph of sluice gate in levee at Mun-san-jae.