• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.135-141
• /
• 2003

In arrayed waveguide grating (AWG) devices whose waveguides were composed of polymer with negative thermo-optic coefficient as overcladding, and silica with positive thermo-optic coefficient as both core and undercladding, we investigated the temperature dependence of the central wavelength using two-dimensional SFDM. From these results, it was confirmed that the temperature dependence can be nearly eliminated by adjusting the refractive index of the cladding and the thickness of the silica thin film upper-loaded on the core. Based on the numerical calculations, the AWG device with polymer overcladding was fabricated. and its optical characteristics were compared with those of the orginal silica AWG device. The introduction of polymer overcladding decreased the temperature dependence of the central wavelength from 0.0130 nm/$^{\circ}C$ to 0.0028 nm/$^{\circ}C$ without deteriorating the insertion loss and crosstalk characteristics.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.40-48
• /
• 2015

An optical network-on-chip(ONoC) architecture is emerging as a new paradigm for solving on-chip communication bottleneck. Recent studies on ONoC have been focusing on supporting the parallel transmission and avoiding path collisions using wavelength division multiplexing(WDM). However, since the maximum number of wavelengths, which a single waveguide can accommodate is limited by crosstalk and insertion loss. Therefore previous WDM studies based on incrementing the number of different wavelengths according to the number of nodes would be infeasible due to the implementation complexity. To solve such problems, we combined time division multiplexing(TDM) and wavelength-routed ONoC, along with an optimized channel allocation algorithm, which can minimize the number of extra wavelength channels and latency caused by combining TDM scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1207-1215
• /
• 2004

A Gigabit Ethernet upstream transmission over a WDM-PON employing remotely wavelength-locked Fabry-Perot lasers has been demonstrated. We have successfully demonstrated a WDM transmission of four Gigabit Ethernet channels with 100 GHz channel spacing over 30 km conventional single mode fiber. The measured f-factor was larger than 17.1 dB. We have also investigated the beating noise characteristics of a wavelength-locked Fabry-Perot laser and showed the remotely wavelength-locked Fabry-Perot laser suppresses the intensity noise of the incoherent light injected, which cause a 6.3 dB SNR improvement compared with that of the conventional spectrum-sliced light source.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1757-1763
• /
• 2014

Optical wavelength division multiplexing signals of eight non-return-to-zero 10 Gb/s channels were transmitted on the long-haul link up to 720 km. The link span was composed of 80 km single mode fiber, dispersion compensation fiber for complete compensation, and EDFAs. A circulating loop method was applied to the link experiment and the loop was optimized for the transmission link. Wavelength-dependent gain variation of EDFA was compensated using EDFAs of opposite gain slopes without expensive gain flattening filters. Average OSNR was aggravated to 22 dB and the worst OSNR channel variation was 9.7 dB after the transmission. It was confirmed by analyzing optical spectra that this OSNR variation was mainly caused by the hole burning effect of EDFA.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.201-210
• /
• 2001

Wavelength and repetition-rate tunable optical pulse-trains for ultrafast optical time- and wavelength division multiplexing are generated from a semiconductor fiber ring laser by optical injection mode-locking. The pulse trains show the pulse with of ${\sim}10$ ps and the wavelength tuning of wider than 30 nm at various repetition-rates of 10 GHz, 20 GHz, 30 GHz and 40 GHz, respectively.

• The Journal of Korean Association of Computer Education
• /
• v.9 no.1
• /
• pp.97-106
• /
• 2006

In the next-generation Internet backbone network, DWDM technology was appeared as an alternative to solve circuit shortage of existing TDM-based Internet. In this DWDM Network, it is inevitable to consider wavelength-conversion function as well as RWA in case of setting up connection for the efficient use of resources and customer satisfaction. This study is to describe an efficient strategy for the wavelength-conversion function with a limited range and for the use of a wavelength converter with the selected node, and to verify the optimum use of a wavelength converter through the performance test.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.12-20
• /
• 1998

All-optical networks(AON) are emerging as the next generation broadband networks for wide-area and local-area networks. Many optical switch architectures are currently proposed to realize AON. Specially, optical switches using WDM have a lot of advantages in point of the optical transparency and network topology for B-ISDN services in AON. In this paper, two kinds of Knockout Optical Switching Architectures(KOSA) are proposed for high speed optical ATM networks. We use WDM technologies for them to operate in all-optical area and they are called Architecture-Ⅰ, Architecture-Ⅱ respectively. Each one represents different characteristics according to the number of components and the kind of components, which make KOSA have different performance and system complextity. In order to verify and to compare the performance, these architectures were analyzed and simulated in terms of cell loss ratio, system complexity and buffering speed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.807-809
• /
• 2004

본 논문에서는 광 부호분할다중접속(OCDMA) 시스템 구현을 위해 각 가입자의 시간ㆍ파장영역의 2차원 부호할당 및 변경이 가능하고 다중 사용자의 암호화된 데이터의 동시 전송과 모든 수신 노드에서 복원이 가능한 OCDMA 시스템 구조를 제안하였다. 또한 기존의 이중 광 하드리미터를 제한증폭기와 AND 게이트를 사용하여 이중 전기 하드리미터를 구현하였다. 서로 다른 파장을 갖는 레이저 다이오드와 FPGA를 이용한 전기 상관기로서 시간과 파장영역의 2차원으로 부호 다중화된 동시 가입자 신호에서 특정 가입자의 신호를 복원하였고, 제한 검출기와 위치 검출기의 이중 전기 하드리미터를 이용하여 MAI로 인한 기존 OCDMA 시스템에서의 식별력 저하와 비트오류 문제를 해결하였다.

• Journal of KIISE:Information Networking
• /
• v.36 no.4
• /
• pp.286-296
• /
• 2009

A major challenge in next generation optical Internet (NGOI) networks based on dense-wavelength division multiplexing (DWDM) is the provision of guaranteed quality-of-service (QoS) for a wide variety of multimedia applications. One of the critical issues in NGOI is the routing and wavelength assignment problem that is embossed as very important and plays a key role in improving the global efficiency for capacity utilization. But the previous researches had the delay problem, and the path routed by higher priority nodes may be congested and interfere with potential future multicast session requests. To overcome these problems, in this research we suggest a Priority-based Minimum Interference Path Multicast Routing (PMIPMR) algorithm, a new routing algorithm which finds alternative routes based on node priorities and Virtual Source (VS) nodes that has both splitting and wavelength conversion, and then chooses a path that does not interfere with potential future multicast session requests when congestions occur in the network. The PMIPMR algorithm reduces blocking rate significantly and increases the wavelength utilization by avoiding congestion in future multicast session requests.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1747-1753
• /
• 2013

Signal performances according link span dispersion compensation conditions at the 2000 km long-haul transmission distance using 10 Gbps 40 wavelength division multiplexing channels were analyzed and compared. 95%, 97.5%, 100%, 102.5% and 105% compensation conditions were applied and 97.5% gave the best performance without post dispersion compensation. the effects of accumulated dispersion value and average dispersion value per transmission link for each link compensation condition were analyzed. When post dispersion compensation optimization was applied to five link span dispersion compensation conditions, 102.5% was given the best performance.