• Korean Journal of Optics and Photonics
• /
• v.6 no.1
• /
• pp.16-20
• /
• 1995

We have studied the spectral narrowing characteristics of the tunable Ti:sapphire laser pumped by the second harmonic generation of Nd:YAG laser. Ti:sapphire laser has uniform excitation distribution by both-side end pumping. We have controlled the angle of grating linearly and achieved the continuous selection of wavelength in the broad range from 705 to 835 nm. The output energy of $380{\mu}J$ at 790 nm. the spectral linewidth of $0.13cm_{-1}$ and the beam divergence of 1.2 mrad have been obtained. The wavelength range with power more than 50% of maximum output was 730-825 nm.825 nm.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.17-21
• /
• 2004

We demonstrate an S/S＋band discretely tunable thulium doped fiber laser (TTDFL), anchored on a 50-㎓ ITU-T grid. Investigating the inversion analysis of the thulium doped fiber (TDF) in applying a dual wavelength (1.4 m and 1.5 m) pumping scheme, a laser whose tuning range covers most of the S/S＋band has been obtained. Within the wide 3-㏈ bandwidth of 65.1 nm, the output power of the tunable laser exceeds 6.1 ㏈m with very flat spectral profile and the number of DWDM channels generated is as large as 178. If we increase the subsidiary pump power to 22 ㎽, the bandwidth is expanded up to 66.2 nm. By controlling the temperature of the fine grid filter, we have also shown that the frequency locking capability of the laser can be improved. The laser developed in this work is expected to be utilized as a practical optical source providing reference wavelengths in the S/S＋band.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1220-1225
• /
• 2009

In this paper, a tunable fiber feedback laser based on the use of Sagnac loop filter and fiber Bragg grating (FBG) is proposed. The Sagnac loop filter using a high birefringence fiber provides precise 0.33-nm channel spacing as a multi-wavelength grid filter. Ni-Cr wire wound on the FBG is useful to induce the thermo-optic effect of the fiber. Two types of FBG structures, which have a different length of wire, are demonstrated to show the wavelength shift and separation. To tune FBG by resistant heat, some current is supplied into the wire. When the wavelength matched with one of the cavity modes of Sagnac loop filter, the mode-locked lasing is occurred. The electrical power sensitivity of the resonant wavelength is measured to 1.75pm/mW. This laser configuration can be applied the electrical power system for monitoring the power fluctuation.

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.217-222
• /
• 2009

In this paper, a low-cost hybrid-integrated tunable laser is realized using a polymer-ring resonator-based add/drop filter reflector and a reflective semiconductor optical amplifier. The add/drop filter reflector, composed of a double-ring resonator with different radii, can have characteristics of selective wavelength reflection and wide wavelength tuning with an aid of vernier effect derived from the radii difference. By hybrid-integrating the reflective semiconductor optical amplifier with the add/drop filter reflector, a tunable laser can be realized through an active alignment method. The hybrid laser exhibited a single mode lasing with side mode suppression ratio of 26 dB and full width half maximum of 0.03 nm. In addition, applying a low current as small as 25 mA onto electrodes over add/drop filter reflector, a wavelength tuning range of 17 nm could be obtained.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.10 s.340
• /
• pp.19-28
• /
• 2005

In this paper, we analyzed tuning characteristics of the widely tunable SGDFB laser diode integrated with SGDBR. The improved time-domain model is used to analyse the laser diode. From the numerical analysis, the length of phase control region in the SGDFB section influences on the output power and the tuning range. Also, it was confirmed that the tuning range is affected by the length of the laser diode, the residual reflectivity at the facet, and the position of the facet.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12A
• /
• pp.1177-1181
• /
• 2006

In this paper, we proposed the new wavelength tunable filter for wide tunability of fiber ring laser. The proposed filter consists of the cascaded connection of Fiber Reflection Mach-Zehnder Interferometer and Sagnac filter or of hybrid filter and fiber Reflection Mach-Zehnder Interferometer. The simulation shows that the continuous tunable range of 50nm can be obtained and that more stable single mode operation of ring laser can be expected due to narrow FWHM. of filter spectrum.

• Korean Journal of Optics and Photonics
• /
• v.12 no.2
• /
• pp.143-149
• /
• 2001

We performed the intracavity frequency-doubling of a tunable continuous-wave Ti:sapphire laser using a lithium triborate $(LiB_3O_5, LBO)$ crystal. For an efficient intracavity frequency-doubling, we measured the spectral and the angular bandwidth about the $\theta$-direction of LBO crystal. The measured values at a fundamental wavelength of 800 nm were 1.54 nm.cm and 3.8 mrad.cm, respectively. As a result of an intracavity frequency-doubling, we obtained the second-harmonic generation output power of 5.3 mW at 400 nm with the full width at half maximum(FWHM) of 0.089 nm from the fundamental output power of 185 mW at 800 nm. The frequency-doubled output was tuned from 397 nm to 403 nm.403 nm.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.674-679
• /
• 2003

We fabricated erbium-doped fiber ring laser with a new structure that can operate in C- & L-band wavelength region. The wave-length of the laser can be tuned continuously over 102 nm between 1510.4-1612.6 nm by insertion of the fiber Fabry-Perot tunable filter (FFP-TF) in the ring cavity. By use of the wavelength tunable characteristics of our fiber laser, we measured absorption spectra of more than fifty transition lines of the acetylene ($^{13}$ C$_2$H$_2$) molecule with high signal to noise ratio (SNR).

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.226-232
• /
• 1999

We have investigated the output power performance of a continuous-wave chromium-doped YAG laser ($Cr^{4+}$:YAG laser), pumped by a Nd: YAG laser. With an output coupler of 1% transmission, we obtained as much as 400 mW of the average output power at 1.450 ${\mu}{\textrm}{m}$. The power slope efficiency of 8%, when the gain medium was cooled to 2$0^{\circ}C$. We tuned the wavelength of the $Cr^{4+}$:YAG laser, at pump power of 6 W, by using birefringent filter. As a result, lasing wavelength was tuned from 1.399 ${\mu}{\textrm}{m}$ to 1.532 ${\mu}{\textrm}{m}$, with the maximum output power of 340 mW at 1.4903 ${\mu}{\textrm}{m}$ and the linewidth was 0.21 nm.

• Korean Journal of Optics and Photonics
• /
• v.21 no.5
• /
• pp.185-189
• /
• 2010

We demonstrate a single-frequency wavelength tunable erbium-doped fiber (EDF) ring laser. We used an unpumped-EDF as a saturable-absorber in order to obtain a stable single-frequency with a narrow-linewidth single-polarization mode in the ring cavity. The lasing wavelength was controlled by using bending-induced strain, such as tension and compression strain corresponding to the bending direction, applied to the fiber gratings. The fiber laser exhibited an output power of -1.85 dBm at a wavelength of 1540.72 nm for a pumping power of ~400 mW. An extinction ratio was measured to be more than 60 dB. The proposed tunable fiber laser maintains nearly the same output power while its lasing wavelength is controlled over in a wavelength range of 5 nm.