• Journal of Korean Society of Steel Construction
• /
• v.26 no.1
• /
• pp.11-20
• /
• 2014

The Concrete Capacity Design(CCD) method has been used in the design of anchor since 2001 and Korean design code specify that concrete breakout capacity of CIP anchor under seismic load shall be taken as 75% of static capacity. In this study, an experimental study was performed to evaluate the concrete breakout capacity of unreinforced CIP anchors under dynamic shear force. For the purpose, three static and dynamic shear-loading tests were conducted using 20mm diameter anchors, respectively. The edge distance of 120mm was considered in the tests. In the dynamic tests, 15 cycles pulsating load with 1Hz speed was applied and the magnitude of loading step was increased until concrete breakout failure occurs. From the tests, the concrete breakout capacity under dynamic shear loading showed nearly same capacity by static loading.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.4
• /
• pp.21-27
• /
• 2019

Composite motor cases fabricated by the filament winding method are structurally weak in the dome when they are required to withstand the internal pressure of the combustion gas. In this study, a finite element analysis is conducted to compare the burst pressure of a composite dome according to the variation of the pressure distribution ratio(PDR). The performance of the composite motor case was compared quantitatively by calculating the stress on the inner and outer dome surfaces and metal boss volume. As a result, the critical point of the failure mode was observed at a PDR between 2.5 and 3.0. A design at a PDR of 2.5­-3.5 can reduce the weight of metal boss without fluctuation in the burst pressure of the combustion motor case. Moreover as the design reference value changes according to the dome shape and opening size, further analysis and testing are necessary.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.10
• /
• pp.927-932
• /
• 2013

The intracranial aneurysm model is extracted based on the Computed Tomography (CT) scan images. Computational fluid dynamics simulations were conducted under both steady and realistic flow conditions in ANSYS-FLUENT. The minimum wall shear stress in the intracranial aneurysm tended to occur in the aneurysmal region. The magnitude of wall shear stress along inner wall of the curvature in the right M1 segment of middle cerebral artery is approximately 20 times higher than that along both the proximal and distal walls. However, the magnitudes of the wall shear stress at the aneurysm region were considerably low. The blood flow has the complex distribution in the aneurysmal region during the systolic period. Complex helical flow patterns are observed inside the aneurysm. Through an analysis of the hemodynamic characteristics, one may predict the rupture of the cerebral aneurysms.

• Korean Journal of Cleft Lip And Palate
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2010

구순구개열은 선천성 악안면 기형중에서 발생률이 가장 높은 질환이며 특히 동양인에게 높은 빈도로 발생된다. 그리고 순구개열에서는 파열부 조직의 선천적 상실과 파열부 봉합 수술 후 형성된 반흔에 의한 상악골의 열성장과 상악궁의 협착, 코의 형태 이상, 등과 함께 치아의 수, 크기와 형태 및 맹출 이상도 높은 빈도로 동반된다. 선천성 치아 발육 이상이 구순열 또는 구개열 가진 환자에게서 종종 보고되고 있다. 이런 치아 이상은 과잉치, 결손치, 크기, 형태, 맹출시기, 법랑질 광화 등의 많은 특징을 포함한다. 이번 연구의 목적은 다음과 같다. 1. 구순열 또는 구개열을 가진 환자의 선천성 치아 결손 발병률을 결정하여 정상인과 비교하는 것이다. 2. 상하악에서 파열이 있는 부위와 없는 부위의 제2소구치 결손가능성을 비교 하는 것이다. 구강악안면외과에서 구순구개열로 진단한 환자 중 2005년 1월~2009년 8월까지 전북대학교 구강악안면외과에서 치조열부위 자가골이식수술을 받은 32명의 환자로 초진시의 교정 chart, 구강악안면외과 chart, x-ray(파노라마, 치근단사진, 교합사진(상악), 석고 모델, 구강내 외 임상사진을 사용하여 순구개열군 별로 매복치, 과잉치, 결손치, 왜소치의 유무와 위치를 조사하여 다음과 같은 결론을 얻었다. 1. 결손치는 비교적 높은 발생빈도(53.1%)를 보였으며, 치아별 발생빈도는 상악 측절치와 상악 제2소구치, 하악 제2소구치 순이었다. 구순구개열군이 구순치조열군에 비해 발생률이 높게 나타났다. 그리고 구순구개열군 내에서 양측성이 편측성에 비해 결손치의 발생률이 높게 나타났다. 2. 왜소치는 71.6%에서 발견되었으며, 치아별 발생빈도는 상악측절치에서 가장 많았다. 구순치조열군이 구순구개열군에 비해 발생률이 높게 나타났다. 3. 치조열을 가진 환자에 있어 상/하악간 제2소구치의 선천적 결손에 유의한 차이가 있었다. 4. 구순구개열이 인접한 상악측절치의 발생중인 미성숙 조직에 영향을 미치며 파열부위와 좀 더 떨어져 있는 상악 제2소구치에도 일정한 영향을 미침을 이번 연구를 통해 다시 확인할 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.5
• /
• pp.271-281
• /
• 2005

An electromagnetic type shock wave generator suitable for extracorporeal shock wave therapy has been constructed by employing a solenoid coil. The Property of the shock waves produced by the shock wave generator was evaluated using a needle hydrophone. It was shown that, as the capacitor discharging voltage increased from 8 to 18 kV, the Positive Peak Pressure (P+) of the shock wave increased non-linearly from 10 to 77 Wa. In contrast. the negative peak Pressure (f) varied between -3.2 and -6.8 MPa. had its absolute maximum of -6.9 ma at 14 kV The peak amplitudes P+ measured repeatedly under the same voltage setting varied within $5\;\%$ from mean values and this is very small compared to about $50\;\%$ for electrohydraulic type shock wave generators. It could be observed, from the hydrophone signal recorded over 1 ms. several sequential acoustic impulses representing bubble collapses. namely. acoustic cavitation. induced by the shock wave. A technique based on wavelet transformation was used to accurately measure the time delay between the 1st and 2nd collapse known to be closely related to the shock strength. It was observed that the measured time delay increased almost linearly from 120 to $700\;{\mu}s$ with the shock wave Pressure P+ increasing from 10 to 77 MPa.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.5 no.2
• /
• pp.117-122
• /
• 2006

Purpose: The purpose of this study is to investigate the relationship between rotator cuff tear and nerve injury, and prevalence of nerve injury using electromyographic study. Materials and Methods: From May 2004 to Feb. 2005, 19 cases, who underwent surgery for full-thickness rotator cuff tear, were evaluated for nerve injury using electomyogram instruments preoperatively. Rotator cuff tears caused by acute high energy trauma were excluded in this study. Mean age was 59 (range, 45-87) years and mean duration of symptoms was 45 (range, 1-360) month. Results: There were six nerve injuries (31.6%). All of them were incomplete brachial plexus injuries, and mainly postganglionic lesions. Four cases among them had minor trauma history. There were no significant differences in terms of cuff tear size, range of motion, pain score and functional score between groups with and without nerve injury. Conclusion: This study showed high prevalence (31.6%) of nerve injury in full-thickness rotator cuff tear. So careful physical examination and evaluation for nerve injury are needed in rotator cuff tear.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.3 no.1
• /
• pp.73-80
• /
• 2004

Purpose: To compare the results of a miniopen repair with those of complete arthroscopic repair in medium and large sized full thickness rotator cuff tears. Materials and Methods: The thirty four(34) patients with medium and large sized complete rotator cuff tear were observed, Group I (complete arthroscopic repair) were 13 cases and group II (miniopen repair) were 21 cases. The tear sizes are from 1cm to 5cm. The average follow up periods are 24(range;12$\~$36) and 28(range; 12$\~$36) months. Subjective pain was evaluated with VAS (visual analogue scale) in rest state. ADL (Activity of Daily Living) and UCLA scoring system were used to evaluate clinical results. Results: At last follow-up periods, pain and functional scores were improved but they had not been shown statistical significance (p>0.05). In the group I and group II, there are no significant difference in VAS, ADL; UCLA score, satisfaction (p>0.05). Conclusions: In medium and large sized full thickness rotator cuff tears, there are no significant clinical results between the arthroscopic and miniopen group.

• Journal of the Korean Institute of Gas
• /
• v.16 no.2
• /
• pp.18-24
• /
• 2012

This research seeks to evaluate damage on type II gas cylinder by an acoustic emission test when executing 20000 cycles fatigue test and thereafter burst test. Used gas cylinders in the experimental are three types as follows; one is sound cylinder, others are cylinders which contain longitudinal and transverse artificial defect. The size of artificial defect is a depth of 3 mm, width of 3 mm and length of 50 mm. In the case of the cylinder which artificial defect, unlike the expectation that it will burst in low pressure, the burst pressure of the cylinder did not differ much according to whether or not there were defects. However, when there was longitudinal defect, the location of burst was near the location of defect. This leads to the effect in which the thickness of the composite material becomes thinner according to the length of the longitudinal defect and this is judged to have an effect on the location of initiation and growth of crack in the liner. Also, for the acoustic emission signal, when there is longitudinal defect, the ratio of an event occurring at defect position among overall hits is more than 50 %, and the source location also accords very precisely with defect position.

• Clinics in Shoulder and Elbow
• /
• v.15 no.2
• /
• pp.91-98
• /
• 2012

Purpose: The objective of this study is to evaluate the functional outcome and identify prognosis of retear patients in patients aged 65 years or over undergoing surgical repair for a large to massive full-thickness rotator cuff tear. Materials and Methods: From 1995 September to 2010 March, 147 patients aged 65years or over (40 male, 107 female, with an average age of 69.6) undergoing surgical repair for large to massive full thickness rotator cuff tear (large 67 cases, massive 80 cases). For functional evaluation, preoperative and postoperative 1 year range of motion and muscle power checked. For subjective evaluation, American shoulder and elbow surgeons score and Constant score were checked. For anatomical evaluation, 87 patients were checked shoulder MRI at the time of the postoperative 1 year. Results: ASES score improved from to 50.4 to 88.9, Constant score improved from 47.1 to 75.2. Supraspinatus power improved from 51.1% to 80.8%, external rotator muscle power improved from 64.5% to 83.1%. Forward elevation improved from 117.4 degrees to 153 degrees, external rotation improved from 23.6 degrees to 41.8 degrees. Follow up MRI showed re-tear in 23%, all re-tear patients were from massive tear except one patient. All re-tear patients showed improved clinical outcomes, but supraspinatus and external rotator muscle power were not improved. Conclusions: Patients aged 65 years or over undergoing surgical repair for a large to massive full-thickness rotator cuff tear showed successful outcomes over 90 percent. Re-tear patients also showed successful clinical outcomes. In elderly patients with large to massive full thickness rotator cuff tear, aggressive surgical repair leads good clinical outcomes.

• Journal of the Korean Arthroscopy Society
• /
• v.12 no.3
• /
• pp.172-179
• /
• 2008

Purpose: To evaluate the functional and structural results of arthroscopic double-row repair using combined knot-tying and knotless suture anchors in rotator cuff tears. Materials and Methods: From March 2006 to June 2007, twenty-one patients (15 males, 6 females; mean age 55.6 years; range 48 to 67) were included who underwent arthroscopic double-row repair for full-thickness tears of the rotator cuff following conservative treatment for a mean of 6.5 months (range 3 to 11). The tear size was carefully inspected arthroscopically and we found 2 small, 13 medium and 6 large-sized rotator cuff tears, with a mean tear size of 2.5cm(range 1.8 to 3.2). The repair constructs were consisted of horizontal mattress sutures using conventional knot-tying suture anchors medially and simple suture at the same level of medial row stitch with Bioknotless RC anchors (DePuy Mitek, Norwood, MA) as lateral row. Clinical and functional evaluations were made according to the range of motion, the ASES, UCLA scale and the isokinetic strength testing. Postoperative cuff integrity was determined through magnetic resonance imaging. The mean follow-up was 15 months (range 13 to 24). Results: The average clinical outcome scores and strength were all improved significantly at the time of the final follow-up (p < 0.01). Nineteen patients (90%) were satisfied with the result of the treatment. In 17 of 21 patients (81%) were judged to reveal healed tendon on magnetic resonance imaging at a mean of 7 months postoperatively. There were no significant functional differences according to the preoperative tear size (p<0.01), but large-sized tear shows less favorable structural results in 3 out of 6 cases(50%). Conclusion: Our results document the usefulness and variability of arthroscopic double-row rotator cuff repairs comparable to the results of the other types of double-row repairs.