• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.297-303
• /
• 2010

We report the particle-size distribution and comminution charactersitics of dolomite depending upon crushing equipment (hammer crusher and roll crusher) and crushing circuit (open and closed). The quantity of fine particles (< 100 mesh) produced by hammer crusher was 34 wt.% which is about three times that by roll crusher. The quantity of 14~25 mesh size fraction by roll crusher was 20 wt.% higher than that produced by hammer crusher. 80 wt.% of the crushing products by hammer crushing was under 35 mesh in size, while the particles produced by roll crushing were relatively coarse. The particle size of both the hammer and roll crushers decreased by employing closed crusing circuit in comparison to open circuit. Products of required particle-size were obtained effectively depending on appropriate crushing equipment and crushing circuit.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.160-163
• /
• 1995

본 硏究는 現在 일상적 있는 재생조골재를 죠오크러져(modified-jaw crusher)를 이 용하여 다시 1-3 파쇄를 행함으로써 재생골재의 품질이 어느정도 개량될 수 있는가를 실험 적으로 구명하여 재생골재의 실용화를 위한 하나의 방법을 제한하고자 하는 것이다. 실험결 과,재화파생 처리를 행하지 않은 경우의 재생근 골재의 흡수율은 5-7%정도이나 재파쇄를 함에 따라 흡수율은 현저하게 낮아져, 3차례의 재파쇄를 행한 경우 흡수율이 2% 이래로 나 타나 재생근골재의 품질을 학보하기 위하여는 재파쇄가 매우 유용한 방법임을 알 수 있었 다. 또한 흡수율의 본포도 처음에는 2개의 범주를 가지고 넓게 산포하게 되나 재파쇄가 진 행될수록 재생근골재중에 부착되어 있던 모르터분이 점차 떨어져 나감에 따라 품질의 산포 가 상당히 낮아지는 결과를 얻었다. 그러나 이와같은 재파쇄에는 많은 실용적 부담이 발생 하게 되므로 골재의 품질과 경제적효율을 고려하여 정적한 재파쇄회수가 결정되어야 할 것 으로 사료 된다.

• Journal of radiological science and technology
• /
• v.28 no.4
• /
• pp.287-291
• /
• 2005

To determine the appropriate session for changing treatment modality according to the size of proximal ureter stone with complete obstruction, We analyzed 201 patients with proximal ureter stone primarily treated by Dornier MPL 9000 lithotripter from January, 2002 to August, 2004. Of total 201 patients, the patients without complete obstruction were 142, and with complete obstruction were 59. In the patients without complete obstruction, the accumulative stone free rate of the first, second, and third session were 68.3%, 86.6%, and 94.4%, respectively. The accumulative stone free rate according to the stone size at third session were 100%, 90.5%, 00.0% in stones less than 10 mm, 10 to less than 20 mm, and larger than or 20 mm, respectively. In the patients with complete obstruction, the accumulative stone free rate of the first, second, and third session were 44.1%, 66.1%, and 76.3%, respectively. The accumulative stone free rate according to the stone size at third session were 100%, 65.5%, 33.3% in stones less than 10 mm, 10 to less than 20 mm, and larger than or 20 mm, respectively. In our study, the size of proximal ureter stone with complete obstruction influenced noticeably on the success rate of extracorporeal shock wave lithotripsy (ESWL). We propose that the proximal ureter stones larger than or 10 mm with complete obstruction are treated by ureteroscopic manipulation than ESWL as the first line treatment modality.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.1
• /
• pp.39-44
• /
• 2005

A sheet type of green body was made with the mixture of 60 wt% red clay, 20 wt% fly ash, and 20 wt% stone sludge. Indentations were made on the surfaces of sheets to investigate fracture rate of 1 to 5 mm artificial light-weight aggregates by various drying, breaking, and forming methods. Drying methods of green bodies were natural, electric oven, microwave, and fast drying by torch. Breaking methods of green bodies were ballmill Ⅰ, ballmill Ⅱ, free dropping in the box, and mechanical breaking with roller mill. The depth and width of indent on the surface of the sheet were varied and the thickness of green bodies was also changed to investigate effects of indentation on fracture rates. The highest fracture rate of 42 % among the various drying methods was obtained by microwave drying for 210 sec and the highest fracture rate of 65 % among the various breaking method was obtained by ballmill Ⅱ method. In forming method, an yield of larger aggregates than Ф = 5 mm decreased and that of smaller aggregates than Ф = 5 mm in creased with increasing depth of indentation (only in 3 mm thick green body)and with increasing thickness of green body. The size of aggregates was most homogeneous (by judging from the measurement of aspect ratio of 1 to 5 mm aggregates.) when 3 mm thick green body was rapidly dried by torch and was broken by ballmill Ⅱ method.

• Tunnel and Underground Space
• /
• v.32 no.1
• /
• pp.1-19
• /
• 2022

In this report, new standard, published by Japanese Geotechnical Society, on in-situ stress measurements by hydraulic fracturing was reviewed. In the standard, modification was made for the calculation of fracture re-opening pressure in consideration of fracture surface roughness and residual aperture. The standard also presents how much the system compliance influences the estimation of the fracture re-opening pressure and subsequent in-situ stresses. It is shown that the stiffer the rock mass is, the system compliance should be sufficiently small enough so as to obtain in-situ stress measurement with higher confidence.

• Explosives and Blasting
• /
• v.42 no.1
• /
• pp.23-33
• /
• 2024

Recently, various techniques and patented methods on blasting operation are being newly developed. In this study, test construction of the MDS blasting method was performed, and the fragmentation size and the occurrence rate of rocks exceeding 300mm were measured and analyzed in comparing to normal blasting method. Test construction was performed three times each for normal and the MDS at the same bench for each round, and fragmentation size(P80) and occurrence rate of rocks exceeding 300mm(S30) were measured using digital image processing. A sieve bucket was also manufactured on-site to sort oversized rock particles from muck piles, and their weights and equivalents were measured to calculate actual values. As a result, the fragmentation size decreased of 21.0% with the MDS compared to normal, and 100-S30 decreased of 10.1%, with actual values decreasing of 7.6%. Although there were variations in blasting effects for each round due to differences in rock quality at site, overall, the MDS proved to be more effective compared to normal blasting method under equivalent conditions.

• Resources Recycling
• /
• v.10 no.2
• /
• pp.34-40
• /
• 2001

Post-consumer dairy HIPS bottles were gathered and recycled by the following processes; crushing into flakes, chemical treatment for the purpose of elimination aluminium caps, washing, and separation from other plastics, such as PP, PE, plasticized PVC These HIPS flakes were extruded into the chips using a single screw extruder. Recyclate HIPS chips were mixed with fly ash as an additive in the range of 5-50 wt%, which were formed from coal power plant. Recyclate HIPS chips mixed with fly ash were molded to investigate thermal and mechanical properties. Their samples, thermal and mechanical properties were measured via DSC, TGA, UTM, and impact strength analysis. The probable mechanical properties exhibited the range of 5∼30% fly ash contents for their applications.

• Journal of Biomedical Engineering Research
• /
• v.20 no.5
• /
• pp.609-616
• /
• 1999

심폐바이패스시 발생할 수 있는 튜브 마모 및 파쇄는 롤러펌프의 반복되는 압박에 의해 롤러펌프에 장착된 튜브 내벽에 균열이 생기고 이로 인해 미세한 비생물적 조각들이 혈액중으로 떨어져 나가는 현상을 말하는데, 임상적으로 치명적인 색전증을 초래할 수 있다. 그러나 아직 롤러펌프 튜브로 사용되는 PVC 및 실리콘 튜브 중 어느 쪽이 마모 및 파쇄 관점에서 더 우수한지는 체계적으로 밝혀지지 않고 있다. 이에 본 연구는 두 종류의 튜브를각각 일정 기간 롤러펌프에 장착하여 작동시킨 뒤 튜브내외면을 육안 및 주사형 전자현미경으로 관찰하였다. 즉 PVC 및 실리콘 튜브 (내경 1/2 인치의)들을 미리 정해진 폐쇄도 조절에 의해 폐쇄 회로 심폐비이패스 롤러펌프 헤드에 장착시키고 4.500ml/min에서 각각 4차례씩 1,2,4,6 시간 작동시켰다. 파쇄에 의한 색전 관찰 실험에서는 회로 중간에 동맥여과기를 설치하고 각각 6,9시간 씩 롤러펌프를 작동시켰다. 실험 후 튜브 및 여과기들을 수거한 후 육안 및 주사형 전자현미경 분석을 시행하였다. 실험후 튜브 및 여과기들을 수거한 후 육안 및 주사형 전자현미경을 분석을 시행하였다. 튜브 외부의 육안 관찰 결과 일반적으로 실라스틱 튜브에서의 외부 마모가 PVC 튜브에 비해 현저하였다. 주사형 전자현미경 관찰에서 PVC 튜브에서의 홈은 좁으면서 경계선이 뚜렷한 특징을 보였고 3시간 이상 롤러와 접촉한 튜브들에게서는 깊은 균열이 간헐적으로 관찰되었다. 반면, 실라스틱에서의 홈은 좁으면서도 경계선이 뚜렷한 특징을 보였고 3시간 이상 롤러와 접촉한 튜브들에게서는 깊은 균열이 간헐적으로 관찰되었다.반면 실라스틱에서의 튜브들에서는 홈이 상대적으로 넓고 경계가 덜 명확했으며, 특징적으로 V 자 모양의 융기부들이 간헐적으로 관찰되었다. 실라스틱 및 PVC 튜브 모두에서 50u 전후의 Craters 가 간헐적으로 관찰되었다. 여과기의 여과망에 대한 주사형 전자현미경 분석 결과 실라스틱과 PVC 튜브 실험군 모두에서 색전입자로 의심되는조각들이 발견되었으나 두군간 정량적 비교는 어려웠다. 결론적으로 롤러펌프에 의한 튜브 마모 및 파쇄현상은 실리콘 및 PVC 튜브의 재질에 따라 그 양상에는 차이가 있으나 임상적인 측면에서는 어느 쪽도 상대적인 우수성이 입증되지 못하였다.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.583-592
• /
• 2014

This study was carried out to investigate the operational time and productivity of logging operation by chain saw, yarder attached on tractor, tower-yarder, mini-truck, mini-forwarder, and chipping operations by mini-chipper, large-chipper in order to develop the efficient logging operation system for utilization of forest-biomass. As a result, the average felling and bucking time using chain saw at the site 1 and 2 was observed to be 182.7 sec/cycle and 518.5 sec/cycle respectively. The average yarding time was 202.5 sec/cycle using yarder attached on tractor and 295.1 sec/cycle using tower-yarder. The average forwarding time was 2,073 sec/cycle using mini-truck and 2,248.4 sec/cycle using mini-forwarder. The operational time of felling and bucking using chain-saw can be delayed according to the direction of fallen trees. The selection of felling direction is very important to yarding operation because the direction between width-yarding and felling are interrelated. Productivity can be improved through educating and training operators in the yarding operations. Mini-forwarder is needed to use because of higher productivity and lower cost than mini-truck. The operational productivity of felling and bucking by chain saw was $66.96m^3/man{\cdot}day$ and $43.86m^3/man{\cdot}day$ at site 1 and 2 respectively. The yarding productivity was $5.68m^3/man{\cdot}day$ by yarder attached on tractor, $10.74m^3/man{\cdot}day$ by tower-yarder. The forwarding productivity was $21.29m^3/man{\cdot}day$ by mini-truck, $28.57m^3/man{\cdot}day$ by mini-forwarder. The chipping productivity was $4.42m^3/man{\cdot}day$ by mini-chipper, $21.87m^3/man{\cdot}day$ by large-chipper.

• Explosives and Blasting
• /
• v.22 no.2
• /
• pp.1-11
• /
• 2004

일반적으로 국내 석회석 광산에서의 발파는 20ms나 25ms 시차를 가지는 지발발파로 시행되어지고 있다. 국외에서는 전자뇌관을 사용하여 암반의 지질학적인 특성에 따라 지발 시차를 사용자의 현장에 따라 선정하여, 주변 보안 물건에 따른 진동 및 소음을 경감하면서, 1회 발파의 생산량을 증대할 수 있으며, 2차 파쇄 비용 및 적재비용을 절감하는 최적의 시차를 적용하여 발파 규모를 줄이지 않는 발파패턴을 적용하고 있다. 본 연구는 해외에서 사용되고 있는 전자뇌관을 국내 현장 석회석 광산(단양)에 적용함으로 최적지연시차를 찾아내는 방법과 초시의 오차에 따른 문제점과 향후 국내 적용성을 판단하고자 하였다. 대규모 석회석 광산을 대상으로 최적시차를 판단하고자 동일 패턴에서 시차를 6ms ~ 30ms로 시험발파를 시행하여 4가지 요소 발파진동속도, 주 주파수특성, 파쇄입도, 암석 이동 및 버력의 상태를 분석하여 각 시차에 따른 배점을 두어, 당 현장에 요구되는 개별 가중치를 선정하여 분석하였다. 분석 결과 당 현장에서의 발파결과에 따른 요소별 가중치를 발파진동속도(20), 주 주파수 특성(20), 파쇄입도(40), 암석 이동(10) 및 버력의 상태(10)로 하여 분석한 결과 15ms가 최적시차로 나타냈다. 향후 각 현장에 적합한 요소별 가중치를 선정하여 현장별 최적시차를 도출한다면 최적의 발파효과를 있을 것으로 판단된다.