• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.234-238
• /
• 2006

In this research, an analysis of damaged instance and forming fault for disc part in automotive steel wheel was performed. Rolled steel material, which had been used in the manufacturing of the damaged disc part, was prepared for tensile test, quantitative analysis of chemical component and acquirement of scanning electron microscope images. Although the results of mechanical properties and chemical component ratio for the material satisfied the suggested specification, some material inherent problem was found in the scanning electron microscope images. Finally, in an analysis of chemical component for the damaged disc part used in road condition, mismatching of chemical component ratio between the suggested specification and test result was found.

• 한국도로학회지:도로
• /
• v.8 no.1 s.27
• /
• pp.57-67
• /
• 2006

• 한국도로학회:학술대회논문집
• /
• 2003.10a
• /
• pp.205-211
• /
• 2003

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.648-655
• /
• 2020

The firing pin of modern automatic rifles detonates the primer of loaded ammunition via a hammer. During this process, the firing pin receives an impact load and repetitive force throughout the life of the rifle. An endurance test of a rifle showed that the firing pin breaks prematurely at 96.26% of life. Accordingly, a case study was conducted through cause analysis and a reconstruction test. Optical microscopy and scanning electron microscopy of the broken surface of the firing pin showed that a crack began in the circumferential direction of the surface, resulting in a fatigue crack to the core after repeated impact. Crack growth and fatigue destruction occurred at the end due to the repetitive impact and was estimated using a notch. For verification, a sample that produced a 0.03mm circumferential notch was broken at 64.25% of life in the reconstruction test. A test of breakage according to the notch types showed that a 0.3mm and a 0.5mm one-side notch were broken at 66.53% and 50.76%, respectively, and a 0.03mm six-point notch was broken at 85.65%. The endurance life of a sample firing pin with a rough surface and tool mark was examined, but an approximately 381 ㎛ internal crack formed. Through this study, failure for each notch type was considered. These results show that quality control of the notch and surface roughness is essential for ensuring the reliability of a component subjected to repeated impact.

• Journal of the Speleological Society of Korea
• /
• no.87
• /
• pp.18-22
• /
• 2008

A cave starts to be destructed and damaged as soon as it's open to the public. Due to many convenience facilities for tour visitors, it's gradually polluted. For example, lamplight causes green and black mold while temperature rise caused by many tourists and lamplight brings vatting and exfoliation. In addition, visitors'reckless behavior have caused water pollution and destructed cave creatures' habitat.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.932-937
• /
• 1995

1990년 12월 카나다의 Darlington 2호기에서 발생한 핵연료 다발의 양쪽 지지판에 있는 지지 금속판의 파손은 펌프 날개 통과 압력 충격파가 Acoustic 성격으로 중폭되어 연료봉지지판의 파손을 일으킨 것으로 추정되었고 이에 따른 주열수송계통에 대한 ABAQUS를 이용한 Acoustic 해석과 수많은 실험을 거쳐 Acoustic 압력 충격파가 핵연료 다발의 연료봉 지지판 파손 원인임이 입증되었다. 이러한 Acoustic 해석과 실험의 결과로써 Darlington 발전소의 열수송 펌프를 5 날개 펌프에서 7 날개 펌프로 교체시키게 되었으며 그 결과 핵연료 스트링의 축방향 진동을 감소시켜 연료봉 지지판의 파손을 방지하게 되었다. 이러한 사례로 인하여 최근 CANDU형 원자로 열수송 계통의 Acoustic 해석에 대한 연구가 AECL의 Chalk River Laboratory와 COG(CANDU Owners Group)에서 활발하게 진행되고 있다. 이 기고문에서는 매우 새로운 분야로써 현재 이루어지고 있는 CANDU형 원자로 열수송 계통의 Acoustic 해석을 위한 해석 이론과 해석 방법을 간단히 요약 정리하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.191-200
• /
• 2020

Tracked military vehicles are operated under harsher conditions and climates than ordinary vehicles, and the components require high degrees of reliability and durability. A diesel engine is the main power generator, and when the vehicle breaks down, there is a high possibility of causing a large-scale accident. Therefore, analyzing the cause of engine failure can be important for preventing similar cases that may occur. In this study, we clarified the mechanism of engine failure according to an overhaul test, hardness measurement, and an analysis of the fracture surface. The overhaul test confirmed that a bolt was separated from the connecting rod (number 4). In addition, the hardness measurement results of the connecting rod bolt conformed to the standard, and it was found that the bolt fracture was ductile fracture through an analysis of the fracture surface. Based on the results, it was concluded that damage to a diesel engine of a tracked military vehicle was caused by separating and damage caused by loosening of the connecting rod bolts, resulting in cascading damage. The results of the study could be used as reference examples and could be useful for another study on engine failure analysis.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.311-320
• /
• 2013

This paper presents the effect of Segment thickness during Shield TBM tunnelling in case study. In order to perform this study, the ground condition developed in the investigation site are reviewed and analysed. It is also carried out the construction problems occurred in the site during Shield TBM tunnelling. Several Segments were broken partially during advance tunnel by jacking pressure. The data surveyed from site are analysed in order to investigate the cause of Segment break. The numerical and analytical evaluations are carried out to examine the effect of Segment behaviour. From the results, it is found that the main causes of Segment break may be the jacking system and Segment thickness. In addition, new jacking technique is suggested to install safely the Segment during advance tunnel by jacking.

• 한국도로학회지:도로
• /
• v.8 no.1 s.27
• /
• pp.5-12
• /
• 2006

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.04a
• /
• pp.151-159
• /
• 2002