• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1349-1355
• /
• 2016

It should guarantee high reliability and ultra low latency communication. Additionally, it should support connection between massive devices. As one of estimated scenarios for 5G mobile communication, mobile devices and sensors using low data rate wireless communication will increase. For communication of these devices, single-carrier system can be considered. In order to satisfy these requirements, in this paper, we propose CDMA (Code Division Multiple Access) system using complex spreading and Multi-level BPSK(Binary Phase Shift Keying). The proposed system spread transmit symbol by using chip code consisted of real and imaginary number. As simulation results, we can confirm that although the proposed system has 3dB lower BER (Bit Error Rate) performance than conventional CDMA system, the proposed system can support 2 times more users in comparison with conventional CDMA system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.251-256
• /
• 2001

An error probability analysis is performed far a hybrid DS/SFH spread-spectrum system using minimum shift keying(MSK) modulation. The channel is assumed to be a Rayleigh fading channel with partial-band noise interference. Expressions are derived for the bit error rate(BER) in the context of Rician and Rayleigh fading channels, as a function of the average signal-to-noise ratio(SNR) $E_b/N_0$, the average signal-to- interference ratio(SJR) $E_b/N_J$, and channel parameters. As a result, in the fading channel with large Rician factor, K, which denotes the ratio of power of the direct and the diffused components, the partial-band interference is the worst case. On the other hand, in Rayleigh fading channel(K=0), the full-band interference($\rho$=1) brings the system to the worst case. Performance comparisons among various channels show that the factor K has much large effect on overall performance. For example, in conditions of $\rho$=0.1 and BER=$10^-2$, the system in Rician channel with K=10 requires more 1.9 dB SNR than that in AWGN channel, whereas it is less 5 dB SNR than that in the Rayleigh channel with K=0.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1985-1992
• /
• 2011

PE(Passive Entry) is an automotive technology which allows a driver to lock and unlock door of vehicle without using smart key buttons personally. PG(Pssive Go) is an automotive technology which offers the ability to start and stop the engine when there is a driver in vehicle with smart key. When these two functions are unified, we call it PEG(Passive Entry/Go). LF(Low Frequency) antenna driver which is one of core technologies in PEG is composed of a digital part which processes commands and an analog part which generates sine waveform. The digital part of antenna driver receives commands from MCU(or ECU), and processes requested commands by MCU, and stores antenna-related driver commands and data on an internal FIFO block. The digital part takes corresponding actions for commands read from FIFO and then transfers modulated LF data to analog part. The analog part generates sine waveform and transmits outside through antenna. The designed digital part for LF antenna driver can acomplish faster LF data transmission than that of conventional product. LF antenna driver can be applicable to the areas such as PEG for automotive and gate opening and closing of building.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.6
• /
• pp.350-356
• /
• 2014

In this paper, we design a local signal to improve a tracking performance of time-multiplexed binary offset carrier (TMBOC) signal, which was adopted in modernized global positioning systems (GPS). Specifically, considering that TMBOC signal includes BOC(6,1) components, we first obtain local signal by evenly dividing sub-carrier of TMBOC(6,1,4/33) by the period of a BOC(6,1) pulse. Finally, we remove side-peaks of TMBOC(6,1,4.33) autocorrelation via combination of partial correlations given from designed local signal and solve the ambiguity problem. From numerical results, when performing signal tracking using the designed local signal, we demonstrate that the improved tracking error standard deviation (TESD) performance is offered as compared its autocorrelation and the conventional correlation functions.

• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.803-814
• /
• 2010

In this paper, we propose a frame structure for modified ATSC transmission systems which is used for a terrestrial 3D HDTV broadcasting. The modified ATSC transmission systems [2] see the potential of increasing a transmission capacity at reasonable TOV (Threshold of Visibility) by modifying channel codes of conventional ATSC systems and varying modulations. We use PN symbols (Pseudorandom Noise) in a guard interval which is used for avoiding the ISI (Inter Symbol Interference) to estimate and compensate the time-varying multi path channel effectively with a maximum transmission payload. With PN symbols in the guard interval, a CIR (Channel Impulse Response) in a time domain can be estimated and a compensation in a frequency domain can be achieved for the accurate channel estimation and compensation. The prosed frame structure is applied to the modified ATSC systems and computer simulations are performed for SER (Symbol Error Rate) performances in TU (Typical Urban)-6 Channel.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.105-114
• /
• 2017

This paper proposes a design method of an LCL-filter for grid-tied three-level inverter systems. The demand for three-phase PWM inverters in applications such as wind or solar power generation systems has been increase in recent years. To reduce harmonic components caused by switching operation, such inverters are connected to the grid via an LCL filter. Although there are research results for designing LCL-filter, the modulation method should be fully considered to make the filter perform desired cancellation ability with minimized size. This paper presents the design methodology for an LCL-filter that is optimized for SVM switching operations. The simulation and experimental results verify the validity of the LCL-filter designed with proposed method in this paper.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.26-36
• /
• 2002

Mach-Zehnder type traveling-wave optical modulators with 3-section and 5-section phase reversal were designed and fabricated on z-cut $LiNbO_3$ substrates. Optical waveguides were designed by means of the FDM(Finite Difference Method). Design of CPW traveling-wave electrodes were performed by the SOR(Successive Over Relaxation) in the active region and by the CMM(Conformal Mapping) in the input/output section. The optical response R(${\omega}$ calculated based on the measured S-parameters showed the bandwidth of 15GHz centered at 25GHz for the 3-section, and the bandwidth of 22GHz at 45GHz for the 5-section.

• Korean Journal of Optics and Photonics
• /
• v.8 no.5
• /
• pp.377-381
• /
• 1997

Poling condition in 2 mol% MgO-doped $LiNbO_3$ crystals is investigated by varying the amplitude of poling electric field from 3V/cm to 7V/cm. It is found that 5V/cm is the best value for the formation of single domain by analysing the characteristics of the second harmonic generation(SHG) as the function of temperature. The temperature dependence of the phase-matching profile of SHG for the crystal applied by a spatially modulated electric field is observed to be very different from the simple sinc function. The distorted profile can be consistently fitted with the numerical simulations. This shows that the crystal homogeneity can be tested by the SHG temperature phase-matching profile. In addition, the thermo birefringence coefficient and electro birefringence coefficient of SHG were measured from the temperature dependence of phase-matching profile and shifts of phase-matching temperature by appling electric field along c-axis.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.68-72
• /
• 2012

In this paper, highly linear power amplifier using bandpass filter based on metamaterial and Composite Right- / Left-Handed (CRLH) structure is proposed. The proposed bandpass filter consist of the series capacitor, series microstrip line and the parallel inductor, parallel microstrip line. The insertion loss is minimized at operation frequency and the $2^{nd}$ harmonic is suppressed by the bandpass filter using the CRLH structure. And we improved the Adjacent Channel Leakage Ratio (ACLR) using the characteristic of the proposed bandpass filter. At 2.14 GHz, we have obtained the output power of 38.83 dBm, the $2^{nd}$ harmonic of .61.33 dBc, the $3^{rd}$ IMD of .54.67 dBc, and ACLR of .51.33 dBc at 5 MHz offset, -56.50 dBc at 10 MHz offset, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1405-1412
• /
• 2015

Recently, Due to the rapid growth of broadcasting communication and video coding technologies, the demands for immersive media contents based on 3D stereoscopic video will increase steadily. And the demands must ultimately provide the contents for users which are in wireless channel such as vehicle, train, and ship. Thus, in this paper, we transmit the 3D stereoscopic video over the maritime Rician channel that direct wave is more dominant than reflective wave. Besides, we present unequel error protection (UEP) by applying hierarchical 4/16-QAM to V+D(Video plus Depth) format which can represent 3D stereoscopic video. We expect our system to provide seamless broadcasting service for users with poor reception condition.