• Journal of Advanced Navigation Technology
• /
• v.2 no.1
• /
• pp.53-60
• /
• 1998

This paper describes some design concepts and design parameters of RZ-SSB which allows full carrier insertion into the single side band to overcome the severe fading in aeronautical telecommunication, and it is described in ARINC Spec. in the name of AME(AM Equivalent), and the necessary transmission bandwidth of RZ-SSB is similar to that of a aeronautical telecommunication. As an amplitude limiter manage to remove the amplitude fading without degrading the quality of output signal, the receiver acts like the FM demodulators. Using the digital Signal Processing(DSP) techniques in the design of transceiver systems has become a performance enhancement of the signal quality and reliability, and making use of DSP, it's able to design low cost, compact transceiver and reduce its weight. For avionics systems is able to eliminate the inherent disadvantages in RZ-SSB, the results of experimental tests suggest that the adoption of RZ concepts is suitable for aeronautical telecommunication transceiver systems use in HF band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.351-363
• /
• 2006

The 8-VSB modulation, the transmission standard for the terrestrial digital television(DTV) of the Advanced Television Systems Committee(ATSC), suffers from multipath fading because it conveys information on the amplitude. To solve this problem, decision feedback equalizers(DFE's) have been commonly used in terrestrial DTV receivers. However, under severe channels, such as a 0 dB ghost channel or a single frequency network (SFN) channel, the DFE shows unstable convergence due to the error propagation caused by decision errors. Instead of unstable time-domain DFE schemes, by proposing a frequency-domain direct-inversion equalization method, we try to guarantee stable equalization and achieve low symbol error rates. To secure the existence of a channel inverse, channel-matched filtering and noncausal filtering are carried out prior to equalization. Simulation results show that the proposed method performs much better than existing DFE schemes in terms of both the stability and the symbol error rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.1900-1911
• /
• 2015

In this paper, we introduce backscatter communication for power-limited sensors to enable long-range transmission in wireless sensor networks, and envision a way to avoid doubly near-far problem in wireless-powered communication network (WPCN) with this technology. In backscatter based WPCN, users harvest energy from both the signal broadcasted by the hybrid access point and the carrier signal transmitted by the carrier emitter in the downlink, and then transmit their own information in a passive way via the reflection of the carrier signal using frequency-shift keying modulation in the uplink. We characterize the energy-free condition and the signal-to-noise ratio (SNR) outage zone in backscatter based WPCN. Further, we propose backscatter based harvest-then-transmit protocol to maximize the sum-throughput of the backscatter based WPCN by optimally allocating time for energy harvesting and information transmission. Numerical results demonstrate that the backscatter based WPCN increases significantly the transmission range and diminishes greatly the SNR outage zone.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.1
• /
• pp.64-72
• /
• 1986

The error rate equation fo DS-BPSK(Direct Sequence Binary Phase Shift Keying) signal transmitted through the nonlinear satellite transponder has been derived in the cochannel interference and downlink Gaussian noise environment. The input to the satellite transponder is the superposition of DS-BPSK signal with one interfere which is a cochannel wide-band PN signal. The error rate performance of DS-BPSK system has been evaluated and shown in figures in terms of carrier to interference power ratio(CIR), downlink signal to noise power ratio(downlink SNR) and process gain. In the analysis, it has been shown that the use of a hard limiter in DS-BPSK satellite system leads to the generation of narrow-band intermodulation products which is independent of the process gain. Also it is known that the error rate performance can be improved in the low levels (below 10dB) of CIR as the CIR increase. As the process gain varies from 10 to 100 the curve gives the about 10 dB gain in downlink SNR to maintain a fixed error rate.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.71-78
• /
• 2008

The paper proposes a chaotic double tent mapping PWM scheme for mitigation the acoustic noise of a motor chive. The chaos area ${\lambda}=0.99$ in bifurcation tree of the double tent mapping is used for generating the chaotic numbers. A 80C196 micro-controller is employed for generation of chaotic numbers, and the triangular carrier with chaotic frequency is obtained by using a 80C196 micro-controller and a MAX038 frequency modulator. The experiments are executed with a 1.5[kw] induction motor chive under the 2.5[A] load condition. As results, the experimental results show that the carrier, voltage and 3-D switching noise spectra of the proposed scheme is spread over the chaotic frequency range with no specific frequency concentration. Thereby, the shrill acoustic noise radiated from a motor chive is reduced by the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2B
• /
• pp.59-68
• /
• 2008

In order to activate the digital broadcasting in Korea, the analog broadcasting will have been closed down until 2012. Recently IPTV(Internet Protocol TV) thorough internet has been regarded as the fourth media following the terrestrial, satellite, and cable for the digital broad casting. And it has been the important medium for the communication and broadcasting system. However IP is not easy to replace the entire broadcasting system with the digital - type broadcasting system. For the digital broadcasting, we should replace all TV sets, install the settop-boxes to receive the various IP media, solve problems about time delaying when changing channels, and support communication and broadcasting consolidation service for such as PVR and Network CCTV. IPMG is the digital converter that is able to solve these problems. In this paper, I'll develop and analyze IPMG converter's performance which sends and receives both the analogue and digital broadcasting signals through various media gives the Network PVR service.

• Korean Journal of Optics and Photonics
• /
• v.30 no.4
• /
• pp.167-173
• /
• 2019

In this paper, we studied characteristics of stimulated Brillouin scattering (SBS) suppression in high-power fiber lasers by using apparatuses applying a temperature gradient (i.e. a step, a sine shape, and random temperature distribution) along the fiber. From the ytterbium-doped polarization-maintaining fiber master oscillator power amplifier built in house, we measured the back-reflection spectrum and power for each temperature gradient, showing that the step shape temperature distribution was the most effective way to suppress SBS. In addition, we investigated the interaction of pseudo-random binary sequence phase modulation conditions and temperature gradients for SBS suppression.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.375-384
• /
• 2004

Switching phenomenon of a three-waveguide optical coupler was analyzed by using the coupled mode theory, and the coupling-length of the device was calculated by means of the FDM. CPW traveling-wave electrodes were designed by the CMM and SOR simulation techniques so as to satisfy the conditions of phase-velocity and impedance matching. Traveling-wave modulators were fabricated on a z-cut LiNbO$_3$ substrate. Ti was in-diffused in LiNbO$_3$ to make waveguides and Au electrodes were built on the waveguides by the electroplating technique. Insertion loss and switching voltage of the optical modulator were about 4 ㏈ and 15.6V. Network analyzer was used to obtain S parameters and corresponding RF response. From the measurement, parameters of the traveling-wave electrodes were extracted as such Z$_{c}$=39.2 $\Omega$, Neff=2.48, and a0=0.0665/cm((GHz) (1/2)). The measured optical response R(w) was compared with the theoretically estimated and both responses were shown to agree well. The measurement results revealed that the ㏈ bandwidth turned out to be about 13 GHz.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.122-132
• /
• 2010

AT-DMB system has been developed to increase data rate up to double of conventional T-DMB in the same bandwidth while maintaining backward compatibility. The AT-DMB system adopted hierarchical modulation which adds BPSK or QPSK signal as enhancement layer to existing DQPSK signal. The enhancement layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of conventional T-DMB service coverage. But this causes the enhancement layer signal of AT-DMB susceptible to fading effect in transmission channel. A turbo code which has improved error correction capability than convolutional code, is applied to the enhancement layer signal of the AT-DMB system for compensating channel distortion. However there is a need for other solutions for better reception of AT-DMB signal in receiver side without increasing transmitting power. In this paper, we propose adaptive array antenna system with Eigen-space beamforming algorithm which benefits beamforming gain along with diversity gain. We analyzed the reception performances of AT-DMB system in indoor and mobile environments when this new smart antenna system and algorithm is introduced. The computer simulation results are presented along with analysis comments.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2043-2046
• /
• 1997

GTO 소자의 최소 턴온 시간(minimum turn-on time, Tmin)때문에 발생된 지령전압 오차를 보상하는 기법을 제안한다. 공간백터전압$(V_1)$의 턴온시간이 Tmin보다 작을 경우에는 전압오차를 PI 제어기로 보상한다. 또한, 지령전압벡터의 크기가 특정한 값(Vmin)보다 작은 경우, 영벡터(zero vector)가 PWM 추기에서 중간에 매치가 되도록 스위칭 순서를 바꿔준다. 시뮬레이션을 통해 이러한 지령전압 오차의 보상으로 펄스 누락(pulse dropping) 영역에서 출력전압의 대칭성이 향상되고 고조파 함유량이 감소한다는 사실을 보인다.