• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.421-424
• /
• 2004

한국 동해시 연안역에서 2001년 6월, 2003년 5월 및 2004년 5월 해상실험 및 실시간 모니터링 부이 시스템을 통해 수집된 해양관측(수온, 유속)자료와 SAR (Synthetic Aperture Radar)위성영상을 분석한 내부파의 물리적 특성을 정리하였다. 이를 토대로 음파전달 모델(RAM)을 통해 내부파에 의한 음파전달 영향을 파악하고, 음도파관 불변 이른(Waveguide invariant theory)을 적용하여 내부파에 의한 해양 변동성을 음향학적으로 정량화 하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.7
• /
• pp.671-676
• /
• 2016

This study is about design for the Rotational Instrument of the Industry factory which is used management safety and maintenance. We developed the multichannel vibration monitering system of the self-diagnosis for middle level CMS(Condition Monitoring System) market, and that system are new features to the expandability and flexibility. Normally one channel is used for treating one signal, but developed instrument can treat four channel with one signal processing card. One rack have redundant power supply and displace and it can check vibration measurement value in field without computer. Bearing fault detection is fundamental of vibration surveillance, but sometimes can not check with vibration velocity and acceleration. So it need the filtering and the amplitude modulation on the acceleration enveloping technology when irregular vibration is happened. We developed the vibration analysis instrument which is applied such technology. And the development prototype shows activated within the vibration error limit.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.11-13
• /
• 2007

본 연구에서 개발한 운항환경 모니터링 시스템은 5개의 가속도계와 자이로, 데이터 취득장치를 포함한 계측 및 통신부, 중앙에서 데이터를 관리하고, 운항지수를 계산하는 전산기로 구성된다. 계측된 가속도와 각속도를 이용하여 운항환경을 나타내는 정량적 지수인 뱃멀미 지수(Motion Sickness Incidence, MSI), 분당 작업방해회수(Motion Induced Interrupt, MII)를 실시간으로 계산한다. 개발된 시스템은 한국해양대학교 실습선인 한나라호의 부산 목포 연안항해시 실선시험을 통하여 유효성을 확인하였다.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.90-98
• /
• 2010

In this paper, vibration-based structural health monitoring methods that are suitable for caisson-type structures are examined by an experimental evaluation. To achieve the objective, four approaches are implemented. First, vibration-based structural health monitoring methods are selected to monitor the structural condition of caisson-type breakwaters. Second, a lab-scaled caisson structure is constructed to verify the selected monitoring methods. Third, the vibration characteristics are numerically analyzed using an FE model due to the change in the rubble mound condition. Finally, experimental vibration tests of the lab-scaled caisson structure are performed to monitor the vibration responses due to changes in rubble mound conditions and the performances of the selected methods are examined from the monitoring results.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.756-759
• /
• 2021

본 논문은 기존의 5축 치아가공기나 반도체장비등에 사용하고 있는 회전형 모터의 경우는 엔코더와 리졸버를 사용하고 있다. 엔코더와 레졸버는 고가이므로 실제 산업현장에서 전동기의 위치 센서로는 적용하기가 힘들다. 또한 엔코더와 레졸버와 같은 광학식 위치센서는 그 크기와 내구성에 있어 약점이 있기 때문에 취부 할 때에도 어려움이 있다. 따라서 본 연구에서는 5축치아가공기에 적용하기 위해서 자석가동자를 만들었으며, 이러한 문제점을 해결하는 방안으로 리니어모터를 고정자로 하고 자석플레이트를 이동자로 하는 시스템과 별도의 리니어 스케일을 배제하고 기존의 정현파를 발생하는 2개의 리니어홀센서 및 영구자석을 이용하여 가동자의 절대위치와 이동 위치를 검출할 수 있는 리니어 모터 및 그 제어방법, 안정성 및 신뢰성을 향상시킬 수 있는 자석가동자를 이용하여 구동시 실시간으로 데이터를 확인할 수 있고 제어할 수 있는 모니터링 시스템을 개발하는 연구이다.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.3
• /
• pp.41-54
• /
• 2024

Regular monitoring plays a crucial role in ensuring the safety of geotechnical structures. Currently, nondestructive methods are employed to monitor such structures to minimize the impact, e.g., sensor-based accelerometers, displacement meters, image-based lasers, and drone imaging. These technologies can observe surface changes; however, they frequently suffer difficulties in terms of identifying changes in internal properties. To monitor changes in internal properties, in situ geotechnical investigations can be employed. A nondestructive test that can be used for this purpose is the spectral analysis of surface wave (SASW) test using geophones. The SASW test is a nondestructive method; however, due to the time required for data interpretation and the difficulty in analyzing the data, it is challenging to use the SASW test for monitoring applications that require frequent observations. However, it is possible to apply the first-step analysis, which yields the dispersion curve, for monitoring rather than the complete SASW analysis, which yields the shear wave velocity. Thus, this paper presents a fundamental study on the phase difference that derives the dispersion curve to utilize the SASW test for monitoring. The reliability of each phase difference interval is examined to determine the boundary to the subjected monitor. The study used phase difference data obtained using a geophone from a single-layered, homogeneous ground site to evaluate reliable boundaries. The findings of this study are expected to improve the utility of monitoring by identifying the ideal boundary for phase difference data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.331-333
• /
• 2011

GNSS를 이용한 위치 결정은 육상, 항만 및 해양 등의 많은 분야에서 공적 상업적인 목적으로 많이 연구되고 있다. 최근 코드 측정치 분해능이 한계를 가지는 것을 인지하고 반송파 위상 측정치를 이용한 위치 결정에 많은 관심을 가진다. 반송파 위상 측정치는 데이터 수집 환경에 의해서 코드 측정치보다 치명적인 영향을 받아 미지정수 결정과 별개로 반송파 위상 측정치 모니터링에 대한 연구가 필요하다. 반송파 위상 측정치는 다중경로, 수신기 내부 문제 등으로 인하여 Cycle-slip, Half Cycle과 같은 반송파 위상 측정치 이상 현상이 발생한다. 특히, Cycle-slip 현상은 반송파 위상 측정치의 바이어스 성분으로 사용자의 위치 결정에 악영향을 미친다. 본 논문에서는 Cycle-slip 현상에 대해서 설명하고, 기존에 연구된 Cycle-slip 현상에 대한 검출, 결정 및 확인 기법들의 장단점을 비교하였다. 마지막으로 시뮬레이션 기반의 Cycle-slip 검출, 결정 및 확인 기법들의 성능을 비교 분석하였다.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.10-18
• /
• 2006

We measured the changes in P-wave velocity that occur when injecting $CO_2$ in gaseous, liquid, and supercritical phases into water-saturated anisotropic sandstones. P-wave velocities were measured in two cylindrical samples of Tako Sandstone, drilled along directions normal and parallel to the bedding plane, using a piezo-electric transducer array system. The velocity changes caused by $CO_2$ injection are typically -6% on average, with maximum values about -16% for the case of supercritical $CO_2$ injection. P-wave velocity tomograms obtained by the differential arrival-time method clearly show that $CO_2$ migration behaviour is more complex when $CO_2$ flows normal to the bedding plane than when it flows parallel to bedding. We also found that the differences in P-wave velocity images were associated both with the $CO_2$ phases and with heterogeneity of pore distribution in the rocks. Seismic images showed that the highest velocity reduction occurred for supercritical $CO_2$ injection, compared with gaseous or liquid $CO_$ injection. This result may justify the use of the seismic method for $CO_2$ monitoring in geological sequestration.

• Korean Journal of Microbiology
• /
• v.47 no.1
• /
• pp.50-55
• /
• 2011

A simple and rapid method was developed for monitoring of Gram-positive bacteria in the wastewater treatment system. Culture suspensions of 4 Gram-positive and 4 Gram-negative strains were filtrated and stained with a polyethersulfone membrane filter and Toluidine Blue-O. To establish quantitative color image analysis, the intensity value of RGB (red-green-blue) color of a scanned filter image was analyzed with a photographic program. Red and green color values of Gram-positive bacteria were higher than those of Gram-negative bacteria. This method was applied to the activated sludge mixed with the Gram-positive bacteria. Although evaluation was difficult due to the irregular size and shape of flocs, the population of Gram-positive bacteria in the activated sludge could be monitored with floc dispersion technique. The more amounts of Gram-positive bacteria in the activated sludge led to the increase of red and green color values. This method provides a rapid and quantitative measurement of Gram-positive bacteria within the wastewater treatment systems.

• Composites Research
• /
• v.24 no.1
• /
• pp.24-30
• /
• 2011

Low-velocity impact can cause various damages which are mostly hidden inside the laminates or occur in the opposite side. Thus, these damages cannot be easily detected by visual inspection or conventional NDT systems. And if they occurred between the scheduled NDT periods, the possibilities of extensive damages or structural failure can be higher. Due to these reasons, the built-in NDT systems such as real-time impact monitoring system are required in the near future. In this paper, we studied the impact monitoring system consist of impact location detection and damage assessment techniques for composite flat and stiffened panel. In order to acquire the impact-induced acoustic signals, four multiplexed FBG sensors and high-speed FBG interrogator were used. And for development of the impact and damage occurrence detections, the neural networks and wavelet transforms were adopted. Finally, these algorithms were embodied using MATLAB and LabVIEW software for the user-friendly interface.