• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.123-124
• /
• 2007

파력발전은 파랑에너지를 이용하여 유용한 에너지를 얻어내는 것인데, 본 논문에서는 그 가운데 진동수주 (Oscillating Water Column)형을 연구 대상으로 취하였다. 이는 외해에서의 파랑에너지를 공기실에 유입 집중시켜 공기실 내 수면의 승강운동을 증폭시키고 이로 인해 발생한 공기실 내의 공기 흐름을 터빈의 구동력으로 사용하는 것을 말한다. 적지 선정과정에서 채택된 곳의 설계파고를 바탕으로 원하는 정격출력인 500kW를 얻어낼 수 있도록 유량과 임펄스 터빈의 최적 직경을 산출하고자 하였는데 개념설계된 파력발전장치의 덕트가 쌍동형 형태를 취하고 있으므로 한 터빈당 250kW급을 목표 발전용량으로 하였다. 지난 연구를 통해서 기 작성된 터빈 성능도표를 활용하여, 본 연구에서는 1차적으로 임펄스 터빈의 개략적인 직경 및 유량을 구하고, 터빈의 자기 기동 특성을 고려하여 최종적인 형상을 구체적으로 도출하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.64-67
• /
• 2017

화물량이나 해상관광객 유입 확대 등 항만수요의 증가에 따른 대응으로 항만을 확장하거나 신규항만을 계획하게 된다. 우리나라 어항의 경우 경관이 수려하고 청정지역으로 분류되어 개발여지가 크다. 이중 감포항의 경우도 해상을 통한 연안 화물의 운송확장과 어항의 기능에서 연안항의 여건을 갖추고 경주와 연계한 해양 관광벨트를 구성하여 친수공간 조성, 송대말 등대 컨텐츠 사업 등 해양관광의 거점으로 도약하기 위한 집중개발을 추진 중에 있어서 종합적인 관점에서 항만확장을 검토할 필요가 있다. 본 연구는 추진 중인 항만확장과 관련하여 남측 및 동측의 항만확장안에 대해 선박의 통항안전 및 계류한계파고에 대한 항만 정온도 여부를 제 3세대 수치파랑 모형인 SWAN모형과 강비선형 Boussinesq 방정식을 적용한 불규칙파 Bouss-2D 모형을 적용하여 모형간 특성을 도출한 후 현재안과 각 대안별로 파랑반응특성을 비교분석하였다. 이에 대한 결과는 각 대안별로 장래 항만확장에 대한 기초자료로 활용될 수 있을 것이다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.583-590
• /
• 2015

Submarine cable installation is essentials for grid connection between existing power grid and newly produced electricity which will be from offshore wind farm in Southwest sea area of Korea. Especially, submarine cable route and protection method is designed in order to ensure the economical efficiency, workability and stability of submarine cable installation. On this paper, we will give the basic information about the submarine cable route and protection method of offshore wind farm which will be built in Southwest sea area of Korea. For this, we have a numerical simulation at high and low tide based on the third-generation wave model SWAN(Simulating WAves Nearshore) using the long term wave data from Korea Institute of Ocean Science and Technology(KIOST). The results of the study, year mean Hs is 1.03m, Tz is 4.47s and dominant wave direction is NW and SSW When the incident wave direction is NW(Hs: 7.0 m, Tp: 11.76s), the distribution of shallow water design wave height Hs was calculated about 4.0~5.0m at high tide and 2.0~3.0m at low tide. When the incident wave direction is SSW(Hs: 5.84 m, Tp: 11.15s), the distribution of shallow water design wave height Hs was calculated about 3.5~4.5m at high tide and 1.5~2.5m at low tide. The wave direction on a dominant influence in the section of longitude UTM 249749~251349(about 1.6 km) and UTM 251549~267749(about 16.2 km) in the submarine cable route are each NW and SSW. Prominently, wave focusing phenomenon appears between Wi-do and Hawangdeung-do, in this sea area is showing a relatively high wave hight than the surrounding sea areas.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.434-445
• /
• 2020

In this study, the minimization of harbor oscillation using permeable breakwater was applied to the actual harbor and investigated an effect of minimization by computer simulation in order to take into account the water quality problems and measures of harbor oscillation by infragravity waves at the same time. The study site is Mukho harbor located at East coast of Korea that harbor oscillation has been occurred frequently. The infragravity waves obtained by analyzing the observed field data for five years focused on the distribution between wave periods of 40 s and 70 s and wave heights in less than 0.1 m was 94% of analyzing data. The target wave periods was 68.0 s. The most effective method of minimization of harbor oscillation by infragravity waves was to install a detached permeable breakwater with transmission coefficient of 0.3 on the outside harbor and replace some area of the vertical wall in the harbor with wave energy dissipating structure to achieve a reflectivity of 0.9 or less. The amplitude reduction rate of this method shown in 27.4%. And the effect of the difference in transmission coefficient of permeable breakwater on the reduction rate of the amplitude was not significant.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4B
• /
• pp.243-251
• /
• 2012

To investigate the characteristics of rip current occurring at Haeundae beach, observations obtained from a buoy and a CCTV were analyzed and numerical experiments were conducted. During observed rip-current events, the CCTV images showed that a couple of wave-trains, which are close to regular waves with slightly different directions, propagated to the beach, and wavelet analyses of data from the buoy showed very narrow-banded spectra with a peak frequency. From the evidences, it was inferred that a known mechanism of generating rip current due to the nodal line area of honeycomb-patterned wave crest was one of the significant factors of rip current occurrences of Haeundae beach. The mechanism has been explained by the following: When two wave-trains with slightly different directions propagate to a beach, wave crests of the incident wave-trains form honeycomb pattern due to nonlinear interaction. The nodal lines of honeycomb pattern are developed in the cross-shore direction. And longshore currents flow toward the nodal line area which has very low wave energy. Consequently their mass flux is expelled through the area toward the sea direction. To confirm the generation, numerical experiments were performed using a nonlinear Boussinesq equation model. In the cases with two incident wave-trains with slightly different directions and with a monochromatic wave propagating over a submerged shoal, it was seen that the honeycomb pattern of wave crests was well developed, and thus rip currents were evolved along the nodal lines.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.14 no.3
• /
• pp.181-188
• /
• 2009

The macro tidal flat of the Gochanggun Myongsasipri, located on the southwestern coast of Korea, is studied in terms of seasonal variations of surface sediment and sedimentary environment. Surface sediments of 45 sites in the winter (February) and the summer (August) are sampled across three survey lines (15 sites in each survey line), respectively. The tidal flat of open-coast Myongsasipri is mainly composed of fine to medium sand, the distribution of which shows a coast-parallel trend. Grain-size distribution has a bi-modal trend, and grain size in the winter is coarser than that in the summer. During the winter, the upper tidal flat is dominated by medium sand, while the lower tidal flat is dominated by find sand. Such a feature is attributed to wave-dominated sedimentation in the winter. The finer grains of the summer rather than that of the winter and relationship between texture parameters suggest that tidal energy plays an important role in tidal-flat sedimentation during the summer. This study represents an environmental change from wave-dominated conditions in the winter to tide-dominated conditions in the summer as a result of the seasonal variation in the intensity of onshore-directed winds and waves in the Myongsasipri tidal flat.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.106-115
• /
• 1988

반잠수식 시추선의 설계에 있어서 구조의 피로수명을 정확하게 추정하는 것은 매우 중요하며, 또한 어려운 일이다. 본 논문에서는 이미 실용화된 Aker H-3모델에 대하여 Palmgren-Miner 가정에 의하여 시추선의 hot-point인 수평 및 수직 K-brace 멤버에 대하여 피로수명을 로이드 선급의 커브에 따라 계산한 결과 북해의 해성환경 조건에서는 16년 동안 계속 작업을 할 수 있다는 결론을 얻었으나 응력 집중계수 (SCF)를 선정하는데 불확실성으로 인하여 사용하는데 주위를 요한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.4
• /
• pp.1-7
• /
• 2007

Using field observations, this study estimated the total weight and types of marine debris along the coast of Jinu Island in the Nakdong River Estuary after typhoons Usagi and Nari had passed. A numerical wave model was used to calculate the spatial wave height distribution at the time of the typhoons' passage. This study found that the total accumulation rate of marine debris deposited on the coast after the two typhoons had passed was about $5,769.86\;kg/km^2/day$ at this site, which was 14.42 times as high as that in normal weather. The wave height distribution in the sea off Jinu Island, based on numerical modeling, was $4.1{\sim}3.5\;m$, which was 1.0-2.5 times greater than for the case of other islands. Therefore, it is likely that the concentration of wave energy led to the deposition of marine debris.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.15-21
• /
• 2007

Using field observations, this study estimated the total weight and types of marine debris along the coast of Jinu Island in the Nakdong River Estuary after typhoons Usagi and Nari had passed. A numerical wave m며el was used to calculate the spatial wave height distribution at the time of the typhoons' passage. This study found that the total accumulation of marine debris deposited on the coast after the two typhoons had passed was about $5,769.86kg/day/km^2$ at this sitε which was 14.42 times more than during normal weather. The wave height distribution in the sea off Jinu Island, based on numerical modeling， was $4.1^{\sim}3.5$ m, which was 1.0-2.5 times greater than for the case of other islands. Therefore, it is likely that the concentration of wave energy led to the deposition of marine debris.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.2
• /
• pp.83-91
• /
• 2017

In order to cope with the abnormally high waves during the storm surge due to climate change, various methods have been proposed for interlocking adjacent caissons to enhance stability of harbor structures. Among the methods, it was studied the method based on an open-cell caisson having reduction effect increasing the cohesion with adjunction caissons by filling materials such as crushed rocks in an inter-cell formed by two facing open-cells which consist of transverse walls. It is necessary to investigate the shear behaviors of an inter-cell to secure the stability using calculating shear forces on inter-cell under oblique wave loadings. It was analyzed the shear force share ratio with the length of internal and external wall and the number of internal walls. Numerical results show that 60~70% of the shear load is transmitted to adjacent caisson through the internal walls, more than 30% is through the external wall. It was applicable in the assumption that filling materials was uniformly distributed in inter-cells, and further studies were worth consideration on other conditions under construction.