• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.234-237
• /
• 2010

본 연구에서는 변단면을 갖는 FCM(Free Cantilever Method) 교량의 설계 단계에서 교각 위치 변경에 따른 경간장 변화와 그로 인한 박스 거더의 형상을 자동 조정하여 설계단계에서의 효율성 향상을 위해 3차원 파라메트릭 모델링 방법을 적용하였다. 이를 위해 FCM 교량 설계 지침서를 분석하여 경간장 변화와 관련된 매개변수들을 추출하고 이들의 관계를 구속조건으로 정의하였다. 또한, 정의한 구속조건의 적용을 통해 대상교량의 파라메트릭 모델링을 수행하여 그 적용 가능성을 검증했으며 결과로 생성된 교량 모델의 물량산출을 수행하여 모델의 정확성을 검증했다.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.92-98
• /
• 2021

Modern society needs constantly the rationality and the efficiency, and this flow of the time has become the paradigm of the whole society. This paradigm has a large influence on the architectural design and industry. Modern technology represented by the development of digital instrument and Information Technology through internet has created and developed two big trend, Parametric Design and BIM(Building information Modeling) in the architectural design and industry. These technologies, though created for different reasons, have a lot of influence on the architectural design and industry for a common purpose such as efficiency and rationality across the boundaries. In this context, this research will be embodied through the example about how parametric design should be made in the beginning of pre-design phase for BIM application. This research aims to consider the design process of Walt Diseny Consert Hall, the work of Frank O. Ghery, a deconstructivism architect, and to embody the shape of National Nederlanden Building in Prague, the Czech Republic, using parametric design tool in pre-design phase. This research later aims to be used as the basic data that can be applied to the entire architectural industry from a planning and a detailed design to a construction for the ultimate BIM application beyond the range of parametric design in pre-design phase. Later, the plan using the parametric design algorithm and BIM application in construction document phase will be conducted.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.2
• /
• pp.1-16
• /
• 2021

The act of design in landscape architecture consists of a concept within a designer's mind, technical representations, and finally, a process of construction. In the 4th Industrial Revolution, the design process is facing many changes due to the rapid development of computer technology and the IT ecosystem. Computer technology was initially developed for simple functions, such as mathematical calculation and graphic representation. However, after the spread of Personal Computers, starting with IBM and Macintosh, programming languages and hardware rapidly developed, algorithms and applications became specialized, and the purpose of using computers became very diverse. This study diagnoses issues concerning the functions and roles that new design methods, such as computational design, parametric design, and algorithmic design, can play in landscape architecture based on changes in the digital society. The study focused on the design methodology using parametric technology, which has recently received the most attention. First, the basis for discussion was developed by examining the main concepts and characteristics of parametric design in modern landscape architecture. Prior research on the use of parametric design in landscape architecture was analyzed, as were the case studies conducted by landscape design firms. As a result, it was confirmed that parametric design has not been sufficiently discussed in terms of the number and diversity of studies compared to other techniques investigated by landscape design firms. Finally, based on the discussion, the study examined specific cases and future possibilities of the parametric design in landscape architecture.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.83-83
• /
• 2004

이 연구의 목적은 IT 기술을 사용하여 가상으로 기구 설계를 할 수 있는 소프트웨어를 개발하여 설계자들이 많은 시행착오를 줄이고 변경된 설계를 좀더 라르고 편리하게 설계에 적용할 수 있게 하는 것이다. 로봇 링크 설계시, 파라메트릭 기능이란 여러 개의 링크와 여러 개의 조인트로 연결된 기구에서 한 링크의 길이 또는 한 조인트의 각도를 변경시켰을 때, 그 링크 또는 조인트 뒤에 연결된 모든 링크들과 조인트들의 위치가 동시에 자동으로 변경되게 하는 기능을 말한다.(중략)

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.4
• /
• pp.417-424
• /
• 2010

This study proposes a parametric modeling method for efficient preliminary design of FCM(Free Cantilever Method) bridge. The method is capable of automatic fitting of cross section according to variation of span length of box girder which has variational section. Parameters for forming longitudinal geometry of box girder are defined, then implicit and explicit constraints, and functional relations among them are defined by applying statistics of parameters used in FCM bridge designs. The constraints and relations are applied to a sample bridge for verifying applicability of parametric modeling. In addition, material quantity of the sample model generated by parametric modeling is estimated and compared to the quantity of the real designed model to check the accuracy of the automatically designed parametric model.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.2
• /
• pp.117-129
• /
• 2015

A parametric array is a nonlinear phenomenon that generates a narrow beam of low-frequency sound using the nonlinearity of the medium. The low-frequency sound so generated has a low sound pressure compared with that of sound generated directly. Consequently, a transducer that can generate a primary wave with high directivity and level is required. This study designed, fabricated, and evaluated a multi-resonance transducer as a parametric array source. The designs of the unit transducers and array transducer were based on an analysis model. The design process was repeated to fabricate the optimum transducer. The fabricated transducer array can generate a 189 dB, 190 dB primary wave level at 6.3 m and a 134 dB difference frequency wave using the parametric array phenomenon. The difference frequency wave has a frequency of 15 kHz and high directivity with an $8^{\circ}$ half power beam width in a $12{\times}18{\times}10m$ water tank.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.35-46
• /
• 2013

A parametric modeling method, one of the core technology of BIM (Building Information Modeling), is proposed for efficient 3D assembly design among components of a superstructure module of modular steel bridge. Assembly system is classified into 3 levels as LoD (Level of Details) for 3D assembly design of the parts. Components forming 3D shape of the parts are identified and defined as parameters, variables depending on parameters, or constants independent of the parameters. Then, spatial assembly rules among the parts are defined according to the assembly system. Positional relations among the identified shape components are defined for mating spatial position and geometrical relations are defined for constraining degree of freedom on X, Y, and Z axis. Finally, a standardized template is designed by applying the rules to 3D based assembly design for the parts of the superstructure module. In addition, applicability of the parametric modeling method is demonstrated by testing the shape variation of the superstructure module according to changing the defined parameters.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.1
• /
• pp.1-8
• /
• 2018

The purpose of this study is to implement modeling by applying the parametric technique to the atypical trusses of rigid retractable large space structures. The retractable large space structure requires a lot of time and skill in modeling nonlinear shapes or generating, interpreting, and reviewing many models by alternative. To solve these problems, we introduce firstly parametric modeling tool, secondly, we analyze the connection of atypical three-dimensional trusses of a rigid retractable large-space structure, and finally model it as parametric components of the developed trusses. Therefore, it is a future study to make effective modeling of the openable roof by developing the components that can realize the modeling of the truss classified by the opening and closing method, respectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.2
• /
• pp.182-188
• /
• 2012

The hull form design technique for high speed power boat based on the parametric design method is presented in this paper. While the design methods of conventional vessels that are currently in use have been well developed in various aspects from existing database. However, an easy and simple design program for high speed power boats needs to be provided for the relatively small boat builders who are in lack of experience and skilled manpower. This paper presents a parametric design technique which is aimed to provide an easier creation of a new model by inputting several parameters, such as angles and lengths, which correlate with hydrodynamics characteristic for high speed boats. The paper also introduces the prototype program developed to design power boat with parametric design technique.

• Composites Research
• /
• v.19 no.2
• /
• pp.13-19
• /
• 2006

In this paper, parametric study was carried out to design sandwich structures for EDM machines controlling stacking sequence, stacking thickness of composites and rib configuration. Sandwich structures which are dealt with in this paper are composed of fibre reinforced composite for skin material and foam or resin concrete for core materials. The sandwich column has cruciform rib to enhance bending stiffness of the structure and the bed has several vertical ribs to resist the normal forces and vibration. The design parameters such as rib thickness and stacking sequence were controlled to enhance the system robustness. Finite element analysis was also carried out to verify the variation of static and dynamic stiffness of the structures according to the variation of the parameters. Vibration tests were performed to verify the natural frequencies and damping ratios of the manufactured composite structures. The appropriate shape and configuration conditions for micro-EDM machine structures are proposed.