• The Journal of the Petrological Society of Korea
• /
• v.11 no.2
• /
• pp.65-73
• /
• 2002

The wavy extinction of quartz grains can be used as a good indicator to show the degree of rock deformation. To determine degree of the rock deformation, intensity of wavy extinction (IWE) of quartz grains was measured by using polarizing microscope, digital camera, and NIH image (or Scion Image). In this experiment, the measurement was performed along the line perpendicular to the subgrain boundary of wavy extinction. IWE was measured when a quartz grain shows maximum extinction in polarizing microscope. NIH image was represented in terms of 256 gray-scale brightness, which was associated with intensity of the wavy extinction. IWE was determined by the degree of brightness versus the measuring length of a quartz grain. IWE was analysed in the distribution chart with the collection unit of 5. Regarding the characteristics of data distribution, the median between the mode and the median of the histogram is defined as a representative value for the IWE, and this value is subdivided into the five levels of rock deformation zones (lowest- or non-, low-, medium-, high-, and highest deformation) with their respective indices (D1, D2, D3, D4, and D5). The correlation between the Eonyang Granite and the Yangsan Fault was investigated by using the indices. The results indicate that IWE values decreased away from the fault.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.2
• /
• pp.138-149
• /
• 2000

Various modeling techniques for ultrasonic wave propagation and scattering problems in finite solid media are presented. Elastodynamic boundary value problems in inhomogeneous multi-layered plate-like structures are set up for modal analysis of guided wave propagation and numerically solved to obtain dispersion curves which show propagation characteristics of guided waves. As a powerful modeling tool to overcome such numerical difficulties in wave scattering problems as the geometrical complexity and mode conversion, the Boundary Element Method(BEM) is introduced and is combined with the normal mode expansion technique to develop the hybrid BEM, an efficient technique for modeling multi mode conversion of guided wave scattering problems. Time dependent wave forms are obtained through the inverse Fourier transformation of the numerical solutions in the frequency domain. 3D BEM program development is underway to model more practical ultrasonic wave signals. Some encouraging numerical results have recently been obtained in comparison with the analytical solutions for wave propagation in a bar subjected to time harmonic longitudinal excitation. It is expected that the presented modeling techniques for elastic wave propagation and scattering can be applied to establish quantitative nondestructive evaluation techniques in various ways.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.39-50
• /
• 2007

This paper presents 3D infinite elements for the elastodynamic problem with multi-layered half-space. Five different types of infinite elements are formulated by using approximate expressions of multiple wave components for the wave function in multi-layered soil media. They are horizontal, horizontal-corner, vortical, vertical-corner and vertical-horizontal-comer infinite elements. The elements can effectively be used for simulating wane radiation problems with multiple wave components. Numerical example analyses are presented for rigid disk, square footings and embedded footing on homogeneous and layered half-space. The numerical results show the effectiveness of the proposed infinite elements.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.219-226
• /
• 1996

The wave-particle duality of light plays important role in quantum optics and it often produces a result different from that of classical wave theory. In this paper, we study the intensity and phase fluctuation of light which show certain change after light goes through a beam splitter, and show the difference between the classical and quantum theory. We show quantitatively that the uncertainty of phase increases at the output of a beam splitter due to the contribution of vacuum fluctuation, even though classical theory predicts no such change in phase fluctuation. The expectation values of normally ordered operators are introduced where the vacuum effect is naturally eliminated, and it is shown that the classical informations are recovered in this way. Analysis on the expectation values produces a distinction between measured phase and inferred phase values and they are related through the contribution of vacuum field.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.3_4
• /
• pp.250-258
• /
• 2002

The wavy extinction of quartz can be used as a standard indicator showing the degree of rock deformation. To determine the degree of rock deformation, the intensity of wavy extinction (IWE) of quartz was measured using petroggraphic microscope, digital camera, and NIH image. In this study, this method was applied to the Cheongsan porphyritic granite, Cheongsan two mica granite, and Baekrok granite to investigate the deformation intensity of Cheongsan area. NIH Image data show a high-grade deformation in the vicinity of the strike-slip fault (between Cheongsan granite and Baekrok granite) and the unconformity (between Cheongsan granite and Youngdong basin). Thus, the main deformation in these areas is most likely to be concentrated on the faults that generate Yeongdong basin and the strike slip faults between Cheongsan granite and Baekrok granite.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2004.11a
• /
• pp.57-63
• /
• 2004

본 연구에서는 3차원 심근조직에서의 회귀성파동에 대한 수치적 해석결과를 제시한다. 심근 조직에서의 회귀성파동은 심실세동(ventricular fibrillation)의 원인으로 지목되고 있으며 심근세포 이온채널 또는 전기전도시스템 등과 같은 여러 가지 요소들이 관련된 복합적 현상으로 생각되고 있다. 지금까지 이에 관한 많은 연구가 전기생리학적 모델을 이용하여 이루어진바 있으며, 주로 동물 심근세포모델에 기반으로 균일한 2차원 또는 3차원 모델에서의 전기전도 현상 해석을 한 바 있다. 그러나 실제 심장조직의 경우, 두께를 가진 3차원적 형상을 지니고 있으며 층을 따라서 전기생리학적으로 상이한 특성을 가진 세포들로 구성된다. 즉 심근은 층을 가로질러 Epi-cardiac, mid-cardiac, endo-cardiac cell들로 구성되며 각기 다른 APD(action potential duration)을 가지고 있다. 따라서 본 연구에서는 이러한 세가지 종류의 인체 심근세포모델을 사용한 3차원 심근조직에서의 활동전위 전도현상에 대한 결과를 제시한다. 이를 위하여 기존의 인체 3가지 종류의 심근세포 모델을 구현하여 그 타당성을 검토한다. 그리고 이를 바탕으로 3차원 조직모델을 구현하는데, simplified bidomain방법을 사용하였다. 3차원 공간상에서 심근세포에 의한 활동전위 전달현상을 해석하기 위하여 유한요소법을 도입한다. 최종적으로는 3가지의 심근세포층을 가진 3차원 심근조직을 구성하고, 여기에 회귀성 파동을 유도한다. 그리고 단일층으로 이루어진 3차원조직에서의 결과와 비교 분석하여 다세포층에 의한 불균일 효과를 분석하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.197-202
• /
• 1995

비정상(unsteady) 압축성(compressible) 유동에 의한 공력음향(aeroacoustics)을 모사하여 공력소음원을 해석하기 위해서는 고차(high order)의 정확도와 높은 해상도(resolution)를 가지며, 상대적으로 계산시간을 많이 필요로 하지 않는 외재적(explicit) 유한차분법이 필수적으로 요구된다. 이것은 주어진 차분방식과 격자계로써 공간과 시간상에 존재하는 미소크기의 파동성분들을 충분히 구현하여야 만족할 만한 수치해를 얻을 수 있기 때문이다. 본 연구에서는, 그러한 유한차분법 중 최근에 관심의 대상이 되고있는 삼각(tridiagonal)또는 오각(pentadiagonal) 집적유한차분법(compact finite difference scheme)이 최대의 해상도를 갖도록 하는 수학적인 방법을 개발하고, 이 방법으로써 새롭게 집적유한차분법을 최적화하였다. 개발된 최적화 방법은, 푸리에 해석법(Fourier analysis)을 통하여 파동수(wavenumber) 영역에서 수학적으로 계산된 위상오차(phase error)를 최소화하는 것이며, 이러한 개념과 방법은 본 연구에서 처음으로 집적유한차분법에 적용되었다. 여러가지 절단정확도(truncation order)에 대해서 최적화 된 집적유한차분법들이 실제 공간과 시간상에서 보여주는 정확도와 오차특성을 알아보기 위하여, 이 방법들을 1차원 선형파동방정식에 적용하였고, 이 결과를 통하여 가장 정확하고 효과적인 절단정확도의 집적유한차분법을 선별하였다. 특히, 오각(pentadiagonal)법에 비해 더욱 효율적인 6차 삼각(tridiagonal)법을 1차원 Euler방정식에 적용하여, 비선형 파동에 대한 모사를 수행할 수 있었다.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.377-382
• /
• 2007

Several prospecting methods have been used to detect deep seated small tunnel in Korea. Tunnel interpretation of seismic method has been performed mainly by wave traveltime inversion method. But it often gives inacurate solution for the exact tunnel position because of the short distance between two measuring boreholes and picking errors of first arrivals. In this study, "error tomogram" was proposed to detect tunnel position and applied to theoretical and field dat using multi-source amplitude data.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.2
• /
• pp.128-135
• /
• 2002

An existing numerical model fo r determining the wave field and pore pressures inside rubble mound breakwater was reformulated here especially to enhance the predictability of interior pore pressures. The pore pressures strongly depend on the nonlinear wave field occurring along frontal slope which is very difficult to be numerically reproduced. In the present study, hence, the amplitude and phase informations of wave pressures along the frontal slope are obtained directly through a hydraulic model test and are incorporated into the numerical model. The interior wave field is analyzed by a boundary element method, and thereby the pore pressures are determined. It was found that the calculated pore pressures agreed quite well with experimental values.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.99-109
• /
• 1999

This paper is concerned with instability of flow fields which are dominated by the entropy mode with the presence of usual acoustic and vortical modes. These combined modes lead to nonlinear unstable waves which may occur in automobile, aircraft, or rocket engines. In this study instability in a side-burning rocket is investigated. It is shown that the energy growth rate parameters increase with an increase of the energy growth factor. The energy growth rate parameters for turbulent flows are larger than those for laminar flows. It is further shown that unstable wave motions for the high-temperature side-burning rocket are dictated mostly by the entropy mode, somewhat by the vortical mode, and least by the acoustic mode.