• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1999.03a
• /
• pp.33-40
• /
• 1999

암석 및 암반을 대상으로 AE 법에 의해 파괴원 위치를 결정하는 경우 복잡한 수학적 알고리즘을 필요로 하며, 다수의 연구자에 의해 수많은 방법들이 개발되어 왔으나 각 해법의 특성에 따라 부분적인 오차를 보이는 것으로 보고되어 있다. 이와 같이 재래식 계산법에 의한 파괴원 위치의 결정은 오차를 감소시키기 위해 다양한 알고리즘이 적용되어야 한다. 이를 위해 도달시간차 및 재료 내부의 속도장을 평가하는 기술이 요구된다. 이것은 암석의 표면에서 발진기와 수신기 사이의 변화로부터 추적가능하며 복잡한 수학적인 알고리즘을 필요로 한다. (중략)

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.3 s.14
• /
• pp.25-31
• /
• 2004

Rail road slope can be fatted because of existence of unexpected soft subsoil. Purpose of this study is verifying the cause of rail road slope failure and determination of soil strength for remedy. Drilling some boreholes, cone penetration test and field vane test were executed in order to find out the cause of slope failure. In addition, laboratory test was conducted in order to determine soil strength of soft soil sampled as undisturbed state. As a result of both the in-situ and the laboratory tests, the cause of slope failure is thought to be propagation of failure zone by progressive rupture of overconsolidated clay Soft soil strength was determined through back analysis of the failed slope.

• Geotechnical Engineering
• /
• v.6 no.1
• /
• pp.43-58
• /
• 1990

In order to get ultimate pullout resistance of ground anchor, the position of failure surface, normal stress and friction angle on the failure surface should be known. In this study, the position of failure surface is obtained by observing deformation of ground around anchor, and stresses on the anchor surface are analyzed by measuring normal and shear stresses on the anchor surface through model anchor test in plane strain. In addition, the relationship between lateral earth pressure and the position of failure surface is analyzed and the formula for calculating ultimate pullout resistance of anchor is proposed by using non-dimensional coefficient of ultimate pullout resistance.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.203-211
• /
• 1998

It is well recognized recently that acoustic emission, which is an elastic wave generated from rapid release of elastic energy in steressed solids, is very useful tool for on-line monitoring of microscopic behavior of deformation of material. In this study, three point bend test was performed to evaluate the microscopic damage progress during the loading and failure mechanism of mortar beam by monitoring the characteristic of AE signal. The relationship between AE characteristic and microscopic failure mechanism is discussed. In addition 2 dimensional AE source location based on triangular method was also done to monitor the intiation and propagation of micro crack around notch tip of mortar beam. It was shown that AE source location was very effective to predict the growth behavior of micro crack in mortar beam specimen.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.179-187
• /
• 2006

Two specimens of mortar containing artificial slit and Geochang granite containing the straight notch were selected to be used in this research. Source mechanism of micro-crack by radiation pattern based on dislocation the-ory was estimated by the first motion of longitudinal wave and spatial distribution between the location of transducers for monitoring acoustic emission and source coordinates determined by the application of the least square method. Result of analysis showed that the orientation of dislocation surfaces due to shear dislocation and tensile dislocation squares considerably with crack direction visually observed. The ultimate goal of this study is to provide fundamental information for source mechanism of micro-crack within materials.

• Composites Research
• /
• v.25 no.1
• /
• pp.19-25
• /
• 2012

The study investigated the buckling behavior of sandwich composite columns with different hole sizes and hole positions when they were applied to a compressive load. The columns consisted of 1.7mm thick faces of glass fabric/epoxy and 23mm, 37mm, 48mm, and 61mm thick cores of urethane-foam. Different hole sizes with the diameter of 25mm and 38mm were considered in this experiment. To evaluate the effect of hole position on the buckling behavior, we considered three types of hole position: 25mm diameter hole located at the center, 25mm diameter hole at 1/4 position from the center to the end of the column, and 25mm diameter hole at 1/2 position from the center to the end of the column. According to the results, buckling and maximum loads of the column having 25mm diameter hole were lower by 10% compared to those of the column without hole, whereas the loads for the column having 38mm diameter hole were 30% less than those of the column without hole. Hole position appeared to have no effect on buckling and maximum loads. Major failure modes were observed as follows: the core shear failure for the thin columns having 23mm and 37mm thick cores, and the face-core debonding for the thick columns having 48mm and 61mm thick cores.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.197-208
• /
• 1999

The process of localization of cracks and movement of the fracture process zone(FPZ) was studied using the acoustic-emission(AE) techniques. The rate of AE events and sources of AE activity were studied for mortar and rock specimens loaded in uniaxial compression. A series of transducers could be used to detect and AE activity. Based on the time differences between detection of the event at different transducers, source of AE activity could be detected. The rate of AE events increased sharply before peak load. The highest rate occurred just after peak load was attained. The effective crack length estimated from the modified linear-elastic fracture mechanics seemed consistent with the optical and AE measurements.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.1
• /
• pp.25-33
• /
• 1999

Since concrete is an inhomogeneous material consisting of larger aggregates and sand embedded in a cement paste matrix, it relatively shows a complex failure mechanism. In order to assure the reliability of concrete structure. microscopic fracture behavior and internal damage progress of concrete under the loading should be fully understood. In this study, an acoustic emission(AE) technique has been used to clarify microscopic failure mechanism and their corresponding AE signal characteristics of concrete under three-point bending test. In addition 2-dimensional AE source location has been performed to monitor the progress of an internal damage and the successive crack growth behavior during the loading. The relationship between AE signal characteristics and microscopic fracture mechanism is discussed.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.17-26
• /
• 2000

To determine the source location of acoustic emission in rock, the least square method has been used until lately but it needs much time and efforts. In this study, neural network system is applied to above model instead of least square method. This system has twenty seven input processing elements and three output processing element. The source locations calculated by above two methods are similarly concordant. The new method using neural network system is relatively simple and easy for calculating source location compared with traditional method.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1991.06a
• /
• pp.38-38
• /
• 1991

콜레스테롤 육아종은 콜레스테롤 결정이 주위조직에 이물질로 작용하여 육아성 반응 및 골파괴 반응을 유발시키는 질환으로 병리조직학적으로 많은 콜레스테롤 결정이 거대세포를 가진 만성적인 염증성 침윤속에 나타나는것을 특징으로 한다. 이 병변은 아주 드물지만 특징적인 방사선적소견, 병리조직학적 소견과 임상양상으로 쉽게 진단이 된다. 두부에서는 다양한 위치에서 발견되는데 특히 함기화가 잘 된 측두골, 유양동, 고실강에서 많이 보이며 전두골, 상악골, 협골, 인상측두골 및 후두개와에서도 보고되고 있으나 부비동에 발생하는것은 특히 드물다. 부비동에서 발생한 콜레스테롤 육아종의 발생기전은 환기장애설, 배출장애설 및 출혈설 등으로 보고되고 있다. 저자들은 최근 복시와 측두통을 호소하는 50세 여자환자에서 접형동에 발생한 콜레스테롤 육아종이 우측 상안와열 (superior orbital fissure)과 경사대(clivus)를 파괴하며 전교조 (Prepontine cistern)로 확장된 1례를 경험하였기에 임상 증세, 특징적인 전산화단층 및 핵자기공명소견과 병리조직학적인 소견을 문헌 고찰과 함께 보고하는 바이다.