• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.73-81
• /
• 1994

The source and source/dipole distribution methods using 3-dimensional panel method have been widely used for ship motion analysis. When these methods are used, large errors in the predicted hydrodynamic coefficients are introduced around the irregular frequencies caused by the resonance of imaginary internal flow. Therefore, the irregular frequencies need to be removed for an accurate prediction of ship motion. This paper adopts 3-dimensional translating and oscillating Green function derived by Wu. The adaptive integration method, stretching transform and stationary phase method are used for the calculation of the calculation of Green function and the integral equation is derived by distributing the Green function n ship surface and inner free-surface. The condition of zero normal velocity, that is, wall condition on inner free-surface has been successfully used for the removal of irregular frequencies in oscillating problems. The calculations are carried out for series 60($C_B=0.7$) vessel and the results are compared with those of other theoretical analyses and experiment.

• 전기의세계
• /
• v.9
• /
• pp.4-10
• /
• 1962

Relay Servo제어계의 특이한 성질의 하나로, 다른 비선형계에섣 그렇지만 외부의 동작에 의한 것이 아니고, 제어계 자체내의 조건에서 계속적으로 주기적운동, 즉 자려주기진동(Sustained Oscillation)이 발생하는 경우가 있다. 제어계가 자려진동의 상태에 있을 때 그 진폭 및 각주파수는 각 부분의 요소에 의하여 결정되고 고유한 값을 가지게 된다. 이러한 상태는 선형제어계의 입장에서 보며는 불안정상태이나, Relay제어계에서는 이 주기진동이 제어량의 일정목표치에 대한 비율이 미리 규정지은 요구조건에 비하여 실제상 허용할 수 있는 정도면 제어계는 안정하다고 할 수 있다. Relay Servo계의 안정, 불안정은 Describing함수의 방법에 의하여 Nyquist, Attnuation-phase Margin Criteria를 사용하여 Kochenburger, Johnson의 연구에서 규정지었다. Relay-Servo자려진동상태는 제어계의 Gain정수 중에서도 그 종류에 따라 각주파수 및 진폭에 미치는 영향이 달라진다. 본문은 위에 설명한 상태를 알아내기 위하여 간단한 Raly위치제어계를 구성하고 Gain정수를 변화시키면서 자려진동의 각주파수 및 진폭의 변화를 계산하고 기록계의 측정치와 비교검토하고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.2
• /
• pp.28-36
• /
• 1993

임의의 형상을 갖는 진동체에 의한 방사 음장해석은 경계요소법에 의하여 이미 많은 해석이 시도되었다. 그러나, 진동체의 형상이 매우 복잡한 경우에는 겉표면의 요소수가 크게 증가할 뿐만 아니라 각 요소에서의 경계조건을 모두 알아내어야 하므로, 저주파에 국한된 해석일지라도 엄청난 시간과 노력이 필요하게 된다. 이러한 어려움을 극복하기 위하여 경계요소법을 사용하되, 복잡한 형상의 진동체를 둘러싸는 가상적인 표면을 매우 간단하게 설정한 후 그 표면상의 경계조건인 음압을 측정한다. 임의의 형상에 대한 파수 영역에서의 감쇠파의여파작업을 위하여 특이값 분리를 사용하였다. 특이값 분리에 의하여 음압분포를 측정위치에서 설정된 일반 좌표계에서의 고유모드로 분해한다. 각 고유모드의 원거리 음장의 기여도에 해당하는 각 특이벡터에 대한 특이값의 크기를 비교하여, 유한개의 고유모드만을 포함시킴으로써 원거리 음장을 예측한다. 몇 개의 예제를 통하여 해석적 방법의 기존의 경계요소법에 의한 결과를 본 연구 방법의 결과와 비교하여 잘 일치함을 확인하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.3
• /
• pp.195-201
• /
• 2001

The time simulation of slow drift motions of moored FPSO in waves is presented. The equation of motion based on Cummin's theory of impulse responses are employed, and are consisted of horizontal plane motions such as surge, sway and yaw. The added mass, wave damping coefficients, first order wave exciting forces and the second order wave drift forces involved in the equations are obtained from three-dimensional panel method in the frequency domain. The mooring lines are modeled as quasi-static catenary cable. As a numerical example, time domain analyses are carried out for a box-type FPSO in long crest irregular wave condition.

• ICROS
• /
• v.17 no.4
• /
• pp.46-50
• /
• 2011

다변수 입출력 제어시스템에서 제어기를 설계하기 위해서는 단일 입출력 시스템에서와 마찬가지로 저주파수영역에서는 루프전달행렬의 크기가 작은 것이 요구되고, 측정잡음 및 플랜트의 불확실성이 존재하는 고주파수 영역에서는 루프전달행렬의 크기가 작게 되도록하여, 잡음의 영향이 출력에 적게 나타나고, 제어기가 포화되지 않도록 하며, 설계된 제어기가 플랜트 모델의 불확실성을 극복할 수 있게 하는 것이 필요하다. 본 원고에서는 각 전달 행렬들의 특이치의 최대 및 최소값들을 이용하여 다변수 제어기가 갖추어야 할 조건들을 정리하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.238-252
• /
• 1998

Diffraction anomalies in the periodic strip grating over a grounded dielectric layer are investigated for the plane wave incidence case of both arbitrary(oblique) incidence angle and arbitrary polarization by use of the spectral domain method combined with the sampling theorem. Some numerical results for the Bragg and Off-Bragg blazing phenomena for the cases of arbitrary incidence angle and polarization as well as TE and TM polarization are presented along with discussions on those phenomena.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.2
• /
• pp.55-60
• /
• 2004

This paper describes the estimation method of hull girder response of ships due to springing. To this aim, nonlinear springing effect on the hull girder is evaluated including vertical, horizontal, and torsional deformation of the hull. The Timoshenko beam model is used to calculate the stress distribution on the hull girder. The quadratic strip method is employed to calculate the hydrodynamic forces and moments on the hull. In order to remove the irregular frequencies, 'rigid lid'is adopted on the hull free surface level and hydrodynamic coefficients are interpolated for asymptotic values. The results of example calculation show a reasonable agreement with previous results for both symmetric and anti-symmetric responses.

• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.251-257
• /
• 2007

Medical imaging zero-phase-sequence component in estimation for picture that is gotten that importance weight of digital device is increased day by day at the same time also so much important. Special quality about resolution uses Modulation Transfer Function by representative method to evaluate sharpness on important element in image quality. Get MTF converting slit, differentiating this making composition ESF edge method uses Excel by edge method in this study to be composition LSF get in fourier to informed measuring mean universally. Such method is considered that can help in principle grasping of step before make Program using C language as many as Matlab.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.223-228
• /
• 2007

First arrival signals of multi-frequency crosswell seismic data, acquired in wells drilled in granitic rock, were analyzed to investigate the characteristic behavior of the signals at the shear zones. Dominant frequencies of the sources were; 10-, 20-, 40-, 56-, and 80 kHz. No obvious changes in the waveform at the shear zones were found; however, at the shear zones, some degree of velocity reductions were observed in the signals of all frequency sources. The 80 kHz signal is slightly faster than 10 kHz signal in the survey region, and the velocity difference between the two signals were found largest at the shear zone where the permeability measured greatest in the survey interval.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.104-111
• /
• 2001

In this paper, VHF( 30~230 [MHz] ) elecbwrognetic waves radiated fyom 며$\pi$jal discharge( PD ) at two-type electrodes in air are measured and the peculiar patterns of their spectra are reported. Also, the polarization and distance characteristics of electromagnetic wave radiated by PD, were investigated. In case of the epoxy msulator inserted, the noise level of radiated electromagnetic waves is 0.6~6.2 [dB] higher than the case in air below 90 [MHz] The frequncy spectrun distribution of radiated electromagnetic waves appears to be different in the whole frequency range according to the arrangmnent of antenna.