• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.439-445
• /
• 2012

The stress singularity for the excess adhesive on interface of adhesively bonded joint was investigated by using the 2-dimensional elastic boundary element method (BEM). To establish a reasonable strength evaluation method and a fracture criterion for the excess adhesive of interface in adhesively bonded joint, it is necessary to evaluate fracture parameters with various bonding conditions. Under the variations of adhesively bonded thickness (h) and diameter (d) for the excess adhesive, a stress analysis was performed, and from the results, the stress singularity index (${\lambda}$) and the stress singularity factor (${\Gamma}$) were calculated. The variations have a great influences on the stress singularity for the excess adhesive of interface in adhesively bonded joint, and the ${\Gamma}$ is reduced as the "h" and "d" increase.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.465-473
• /
• 2018

The application of singular value decomposition (SVD) filtering is examined for attenuation of the ground-roll in land seismic data. Prior to the SVD computation to seek singular values containing the highly correlatable reflection energy, processing steps such as automatic gain control, elevation and refraction statics, NMO correction, and residual statics are performed to enhance the horizontal correlationships and continuities of reflections. Optimal parameters of SVD filtering are effectively chosen with diagnostic display of inverse NMO (INMO) corrected CSP (common shot point) gather. On the field data with dispersion of ground-roll overwhelmed, continuities of reflection events are much improved by SVD filtering than f-k filtering by eliminating the ground-roll with preserving the low-frequency reflections. This is well explained in the average amplitude spectra of the f-k and SVD filtered data. The reflectors including horizontal layer of the reservoir are much clearer on the stack section, with laminated events by SVD filtering and subsequent processing steps of spiking deconvolution and time-variant spectral whitening.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.240-240
• /
• 2003

V-노치 균열에서 열하중이 작용하는 경우는 비제차형 경계조건의 문제가 되고, 이 조건에 대한 방정식의 일반해를 구하기 위해서 재차형 연립방정식에 대한 일반해(Homogeneous solution)와 비제차형 연립방정식에 대한 특수해(Particular solution)의 두 가지 해를 구할 수 있다. 이들 해는 V-노치 균열에 대한 고유치가 되고 이 고유치가 중복근을 가지게 되는 경우에는 로그항(1n[r])이 나타나게 되고 이 항에 의해서 응력을 무한대로 발산시키므로 이를 대수응력특이성이라 한다. 열하중이 작용할 때 대수응력특이성을 나타내는 로그항의 계수가 영(0)이 되어 대수응력특이성이 사라지게 되므로 V-노치 선단에서의 응력특이성은 고유치와 그에 대한 고유벡터에 의해 결정된다. 본 논문에서는 비정상상태 열하중이 가해지는 등방성 이종재료 내의 V-노치 균열문제에서 패기 각도와 이종재료의 기계적 성질에 의해 결정되는 응력특이성지수를 구하고 이에 대한 응력강도계수를 유한요소해석 프로그램인 ANSYS와 상반일 경로 적분법(RWCIM)을 이용하여 구하였다.

• Tribology and Lubricants
• /
• v.35 no.4
• /
• pp.229-236
• /
• 2019

This study investigates the stress singularity that occurs at the contact edge of three bodies in a frictional complete contact. We use the asymptotic analysis method, wherein we constitute an eigenvalue problem and observe the eigenvalue behavior, which we use to obtain the order of the stress singularity. For the present geometry of three bodies in contact, a contact between a cracked indenter and half plane is considered. This is a typical geometry of the PCMI problem of a nuclear fuel rod. Thus, this paper, specifically presents the characteristics of the PCMI problem from the perspective of stress singularity. Consequently, it is noted that the behavior of the stress singularity varies with the difference in the crack angle, coefficient of friction, and material dissimilarity, as is observed in a frictional complete contact of two bodies. In addition, we find that the stress singularity changes essentially linearly with respect to the coefficient of friction, regardless of the variation in the crack angle and material dissimilarity. Concurrently, we find the order of singularity to be 0.5 at a certain coefficient of friction, irrespective of the crack angle, which we also observe in the crack problem of a homogeneous and isotropic body. The order of singularity can also exceed 0.5 in the frictional complete contact problem of three bodies. This implies that the propensity for failure when three bodies are in frictional complete contact can be even worse than that in case of a failure induced by a crack.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.1
• /
• pp.9-17
• /
• 2014

The Vegetation cover is a significant factor to comprehend characteristics of the ground surface for meterological and hydrological models, which measure energy in the atmosphere or predict the runoff of ground surface. Deardorff introduced vegetation cover fraction to quantitatively comprehend the vegetation cover in 1978. After Deardorff, most of previous researches were conducted on low-resolution or high-resolution images, but only few researches on Landsat that are in medium-resolution images. Therefore, this study aims to investigate a way of calculating the vegetation cover fraction by using NDVI of Landsat images, which were hardly handled previously. For accurate vegetation cover fraction, we compared the evaluated parameters from this study with past vegetation cover fraction parameters that have been calculated for using NDVI of Landsat OLI images. The result of research was shown that NDVI is quite correlated with the vegetation fraction cover in the previous researches. In fact, RMSE of vegetation cover fraction values that obtained through the suggested parameters on this study showed the highest accuracy of 7.3% among all the cases.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.4
• /
• pp.29-37
• /
• 2004

This paper provides a reliable H$_{\infty}$ state feedback controller design method for delayed singular systems with actuator failures occurred within the prescribed subset. The sufficient condition for the existence of a reliable H$_{\infty}$ controller and the controller design method are presented by linear matrix inequality(LMI), singular value decomposition, Schur complements, and changes of variables. The proposed controller guarantees not only asymptotic stability but also H$_{\infty}$ norm bound in spite of existence of actuator failures. Since the obtained sufficient condition can be expressed as an LMI fen all variables can be calculated simultaneously. Moreover, the controller design method can be extended to the problem of robust reliable H$_{\infty}$ controller design method for singular systems with parameter uncertainties, time-varying delay, and actuator failures. A numerical example is given to illustrate the validity of the result.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.9-16
• /
• 2010

This study investigated cut-off values of body mass index (BMI) and body fat measures for metabolic syndrome (MS) in elderly Koreas. Questionnaire surveys, anthropometric measurements, medical examinations, and body composition analyses were conducted for 10,077 subjects aged 40-65 years in the health examinee cohort in Korea between 2004 and 2006. Cut-off values were identified using receiver-operating characteristic (ROC) curve analysis for both men and women. Stratified analyses by weight range (<60, 60-69, 70-79, and 80-89, ${\geq}90\;kg$ for men; <50, 50-59, 60-69, 70-79, ${\geq}80\;kg$ for women) were conducted. Among male subjects, the cut-off points were $25.5\;kg/m^2$ for BMI with a sensitivity of 70.0% and a specificity of 72.0%, and 26.1% for body fat percentage with a sensitivity of 60.6% and a specificity of 76.4%. Among female subjects, the cutoff points were $24.1\;kg/m^2$ for BMI with a sensitivity of 73.3% and a specificity of 68.8%, and 31.5% for body fat percentage with a sensitivity of 76.7% and a specificity of 65.6%. Stratified analysis by weight range showed that the cutoff points of BMI and body fat measures tended to higher as weight level increased. The results of our study suggest cut-off values of BMI and body fat measure for MS were similar to the general obesity criteria in Korea.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.477-480
• /
• 2009

최근 북한지역에 발생한 홍수와 가뭄 등 심각한 자연재해의 원인이 악화된 식량난으로 인한 과도한 산림의 훼손으로 추정되고 있어 북한 지역의 산림 생태계에 대한 연구의 필요성을 더욱 확인하는 계기가 되고 있다. 위성자료로부터 얻을 수 있는 식생지수(NDVI)는 농작물, 초목, 산림등과 같은 중요한 식생자원을 모니터링 하기 위해 설계된 도구로 식생의 활력도를 정량적으로 표현할 수 있다. 또한, 식생지수는 개략적인 식생을 파악하는데 주로 사용되기 때문에 초기조사에 많이 이용되고 있다. 따라서, 본 연구에서는 개마고원지대를 포함하는 표고 1000m 이상의 한대림지대의 산림식생에 대해 9년(2000~2008)간의 시계열 MODIS영상에서 나타나는 식생지수의 생물계절 특징을 분석하였다. 식생이 성장하기 시작하는 시기(the beginning of the growing season)는 5월 9일 이후부터 5월 25일 사이의 기간으로 나타났고, 식생의 휴면 시기(the end of growing season)는 9월 14일부터 9월 30일 사이 기간으로 관측되었다. 이는 4월 초에 시작하고 10월에 사라지는 한반도의 일반적이 식생패턴보다 성장은 한달 늦게, 휴면은 한달 이르게 한다는 것이 확인되었다. 또한, 8월 초순의 NDVI 값이 9년 동안 계속적으로 가장 높은 값을 보여주고 있다. 이것은 개마고원지역 및 주변 한대림 지대는 7월 말에서 8월 초순에 식생이 가장 활발한 것을 의미한다. 9년 동안 전반적인 식생지수는 0.2~0.9 값을 보였고, 특이할 점은 9년 동안의 평균적인 NDVI 값에 비해 2002년의 식생의 활동이 봄에 빨리 개화하고 가을에 일찍 지는 패턴을 보였다.

• Journal of the Korean Chemical Society
• /
• v.37 no.12
• /
• pp.1025-1034
• /
• 1993

We have measured ${\pi}^*$, $\alpha$ and $\beta$ polarity parameters of 2-propanol / hexane and ethyl acetate / hexane mixed solvents over the entire range of composition. For the ethyl acetate / hexane system, only ${\pi}^*$ and $\beta$ were measured since $\alpha$ of these mixed solvents are defined zero. We have corrected the measured polarity parameters to obtain consistent data with the existing literature data assuming a good linear correlation between the measured and the true values. The variation patterns are consistent with the expected trends based on the chemistry of the solvent components. The general trends of the two solvent systems are summarized as follows. ${\pi}^*$ merely increases as the content of the more polar solvent increases while $\alpha$ and $\beta$ increase with the increase of the content of the more polar solvent, then decrease upon continuing addition of the more polar solvent.

• Sleep Medicine and Psychophysiology
• /
• v.9 no.1
• /
• pp.34-40
• /
• 2002

Objectives: The gold standard for diagnosing obstructive sleep apnea syndrome (OSAS) is nocturnal polysomnography (NPSG). This is rather expensive and somewhat inconvenient, however, and consequently simpler and cheaper alternatives to NPSG have been proposed. Oximetry is appealing because of its widespread availability and ease of application. In this study, we have evaluated whether oximetry alone can be used to diagnose or screen OSAS. The diagnostic performance of an analysis algorithm using arterial oxygen saturation ($SaO_2$) base on 'dip index', mean of $SaO_2$, and CT90 (the percentage of time spent at $SaO_2$<90%) was compared with that of NPSG. Methods: Fifty-six patients referred for NPSG to the Division of Sleep Studies at Seoul National University Hospital, were randomly selected. For each patient, NPSG with oximetry was carried out. We obtained three variables from the oximetry data such as the dip index most linearly correlated with respiratory disturbance index (RDI) from NPSG, mean $SaO_2$, and CT90 with diagnosis from NPSG. In each case, sensitivity, specificity and positive and negative predictive values of oximetry data were calculated. Results: Thirty-nine patients out of fifty-six patients were diagnosed as OSAS with NPSG. Mean RDI was 17.5, mean $SaO_2$ was 94.9%, and mean CT90 was 5.1%. The dip index [4%-4sec] was most linearly correlated with RDI (r=0.861). With dip index [4%-4sec]${\geq}2$ as diagnostic criteria, we obtained sensitivity of 0.95, specificity of 0.71, positive predictive value of 0.88, and negative predictive value of 0.86. Using mean $SaO_2{\leq}97%$, we obtained sensitivity of 0.95, specificity of 0.41, positive predictive value of 0.79, and negative predictive value of 0.78. Using $CT90{\geq}5%$, we obtained sensitivity of 0.28, specificity of 1.00, positive predictive value of 1.00, and negative predictive value of 0.38. Conclusions: The dip index [4%-4sec] and mean $SaO_2{\leq}97%$ obtained from nocturnal oximetry data are helpful in diagnosis of OSAS. CT90${\leq}$5% can be also used in excluding OSAS.