• Title/Summary/Keyword: 특이길이

Search Result 166, Processing Time 0.036 seconds

An unusual over-gravid female of Enterobiw uemicularis recovered from a child (소아에서 검출한 특이한 과수태 요충)

  • 채종일;한은택
    • Parasites, Hosts and Diseases
    • /
    • v.35 no.3
    • /
    • pp.215-218
    • /
    • 1997
  • An unusual over-gravid female of Enterobiw uemiculcris was recovered from a 15-month old child by cello-tape anal swab. The patient resided in Inchon and complained of severe anal itching. The worm measured 7.8 mm in length and 0.5 mm in width, and retained typical morphologic features of E. uemiculnris such as cephalic alas and a sharply pointed posterior end. In this gravid female, peculiarly. the uterus was tremendously distended, and about 99% of the whole body length was completely packed with a great number of eggs. Other internal organs were difficult to observe. This paper describes a peculiar over-gravid female of E. vemiculcyis.

  • PDF

Acoustic Analysis for Thermal Environment-related Vocalizations in Laying Hens (산란계의 열환경별 특이음에 대한 음성학적 분석)

  • Jeon, J.H.;Yeon, S.C.;Ha, J.K.;Lee, S.J.;Chang, H.H.
    • Journal of Animal Science and Technology
    • /
    • v.47 no.4
    • /
    • pp.697-702
    • /
    • 2005
  • The aim of this study was to divide vocalizations of laying hens (Hy-Line Brown) into general vocalizations (GVs), heat stress-related vocalization (HSV), and cold stress-related vocalizations (CSVs) and to determine if they are classified by the discriminant function analysis method. Thirty laying hens, 65-wk-old, were recorded using digital video recorders 2 times from 10:00 to 14:00 h in each thermal environment (thermoneutral: $22.0{\pm}1.8^{\circ}C$, too hot: $32.0{\pm}2.0^{\circ}C$, too cold: $8.0{\pm}1.9^{\circ}C)$ after a 7 day acclimation period. When the laying hens were not recorded, they were kept in thermoneutral conditions. The GVs, HSV, and CSVs were divided based on the shapes of spectrums and spectrograms. The GVs, HSV, and CSVs were identified as 5, 1, and 3 types, respectively. Pitch, intensity, duration, formant 1, formant 2, formant 3, and formant 4 among the thermal environment-related vocalizations were significantly different (P<0.001). The discrimination rate determined by discriminant function analysis was 86.2%. These results suggest that HSV and CSVs are present and may be used as an indicator of the thermal environment.

The Specific Gene Characteristics of Chloroplast Genome in Viola (제비꽃종류에서 나타나는 엽록체 DNA 게놈의 특이 유전자 특징)

  • Ah-reum Go;Ki-Oug Yoo
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2023.04a
    • /
    • pp.19-19
    • /
    • 2023
  • 제비꽃속 34분류군의 61개체를 대상으로 엽록체 DNA 게놈 특이 유전자의 특징을 알아보고자 하였다. 61개체의 엽록체 게놈 전체 길이는 155,535~158,940 bp 로 모두 전형적인 사분할 구조였다. 지역별로는 LSC 지역이 84,826~87,250 bp, SSC 지역이 16,338~18,654 bp, 그리고 IR 지역이 26,029~27,192 bp 였다. 유전자 개수는 131개로 84개 protein coding-gene, 37개 tRNA 유전자, 8개 rRNA유전자, 그리고 2개의 유사유전자인 𝜓rps19, 𝜓ycf1으로 구성되어 있었다. LSC/IRa 경계에 위치한 rps19 유전자 길이는 279 bp로 모든 분류군에서 동일하였으며, 𝜓rps19의 길이는 다양했으나 유전자 개수에는 영향을 미치지 않았다. SSC/IRb 경계에 위치한 ycf1 유전자 길이는 약 5,600 bp 였으나, V. japonica (MZ151699) 1개체에서는 다른 종에 비해 약 1,000 bp 위치에서 발생한 점돌연변이로 인해 종결 코돈이 나타나는 특징을 보였다. 한편 13분류군의 23개체에서는 𝜓ycf1의 길이가 650 bp 정도 짧은 것을 확인하였는데, 이 종류들은 원예종인 V. tricolor (ON262802) 이외에는 모두 줄기가 없는 분류군들로 IR 지역의 확장과 SSC 지역의 수축에 의한 것으로 판단된다. ndhF는 대체로 SSC 지역에 위치하나, V. inconspicua (MZ065354), V. mongolica (MW802534, ON548135), V. yunnanfuensis (MW802541) 등 4개체에서는 IRa/SSC 경계에 위치하면서 유사유전자가 발생하였고, 그 결과 다른 제비꽃 종류에 비해 유전자 개수가 132개로 차이를 보였다. 또한, V. collina (OP271831), V. mirabilis (MH256000), V. tricolor (ON262802) 등 3분류군에서는 SSC 지역이 inversion 되어 엽록체 이성질체가 존재함을 확인하였다. 이상의 결과를 종합하면, 제비 꽃속 엽록체 게놈 61개체의 ycf1, 𝜓ycf1, ndhF, 𝜓ndhF 등은 유전자 길이와 개수 등에 차이를 보이는 것으로 나타났으며, 제비꽃속에서도 엽록체 이성질체가 존재함을 확인할 수 있었다.

  • PDF

Physically Compatible Characteristic Length of Cutting Edge Geometry (공구날 특이길이의 물리적 적합성 고찰)

  • Ahn, Il-Hyuk;Kim, Ik-Hyun;Hwang, Ji-Hong
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.29 no.3
    • /
    • pp.279-288
    • /
    • 2012
  • The material removal mechanism in machining is significantly affected by the cutting edge geometry. Its effect becomes even more substantial when the depth of cut is relatively small as compared to the characteristic length which represents the shape and size of the cutting edge. Conventionally, radius or focal length has been employed as the characteristic length with the assumption that the shape of cutting edge is round or parabolic. However, in reality, there could be various ways to determine the radius or focal length even for the same tool edge profile, depending on the region to be considered as cutting edge in the measured profile and the constraints to be set in constructing the best fitted circle or parabola. In this regard, the present study proposes various models to determine the characteristic length in terms of radius or focal length. Their physical compatibility are validated by carrying out 2D orthogonal cutting experiments using inserts with a wide range of characteristic length ($30{\sim}180\;{\mu}m$ in terms of radius) and then by investigating the correlation between the characteristic length and the cutting forces. Such validation is based on the common belief that the larger the characteristic length is, the blunter the cutting edge is and the higher the cutting forces are. Interestingly, the results showed that the correlation is higher for the radius or focal length obtained with a constraint that the center of best fitted circle or the focus of the best fitted parabola should be on the bisectional line of the wedge angle of tool.

Design of Singularly Perturbed Delta Operator Systems with Low Sensitivity (낮은 민감도를 지니는 특이섭동 델타연산자 시스템의 설계)

  • Shim, Kyu-Hong;Sawan, M.E.;Lee, Kyung-Tae
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.32 no.7
    • /
    • pp.76-82
    • /
    • 2004
  • A method of designing a state feedback gam achieving a specified insensitivity of the closed-loop trajectory by the singularly perturbed unified system using the operators is proposed. The order of system is reduced by the singular perturbation technique by ignoring the fast mode in it. The proposed method takes care of the actual trajectory variations over the range of the singular perturbation parameter. Necessary conditions for optimality are also derived. The previous study was done in the continuous time system The present paper extends the previous study to the discrete system and the ${\delta}-operating$ system that unifies the continuous and discrete systems. Advantages of the proposed method are shown in the numerical example.

Boundary Element Analysis of Stress Intensity Factor for Interface Edge Crack in A Unidirectional Composite (단일방향 복합재료의 공유면에 존재하는 모서리 균열의 경계요소해석)

  • 이상순;김정규
    • Computational Structural Engineering
    • /
    • v.9 no.1
    • /
    • pp.77-83
    • /
    • 1996
  • The overall stress intensity factor for edge crack located at the interface between fiber and matrix of a unidirectional graphite/epoxy laminate model subjected to a transverse tensile strain have been computed using the boundary element method. Such crack might be generated due to a stress singularity in the vicinity of the free surface. The amplitude of complex stress intensity factor has the constant value at large crack lengths.

  • PDF

Analysis of Genetic Variation in the Small Subunit Ribosomal RNA Gene of Euplotes Ciliates for Developing Species Diagnostic Molecular Marker (종 식별 분자 마커 개발을 위한 섬모충류 Euplotes의 small subunit ribosomal RNA 변이성 분석)

  • Kim, Sun-Young;Kim, Se-Joo;Min, Gi-Sik;Yang, Eun-Jin;Yoo, Man-Ho;Choi, Joong-Ki
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.12 no.3
    • /
    • pp.225-233
    • /
    • 2007
  • To verify which loop regions of 18S rRNA gene are suitable as species-specific genetic markers in ciliates, we analyzed the genetic variation of 18S rRNA gene among 9 Euplotes species (Hypotrichia : Ciliophora). In our result, no inter-specific variation was detected from V1, V3 and V5 regions, and the length of V7 and V8 are 44 bp and 79 bp, respectively, which are too short to make genetic marker. In contrast, V2 and V4 may be good candidate segments of species-specific diagnostic molecular markers because these two regions are most variable ($1.75{\sim}20.61%$) and showed good inter-specific phylogeny. Furthermore, the sequences of V2 and V4 are 123 bp and 306 bp, respectively in length which are enough to make species-specific marker.

The Accuracy Analysis of Methods to solve the Geodetic Inverse Problem (측지 역 문제 해석기법의 정확도 분석)

  • Lee, Yong-Chang
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.29 no.4
    • /
    • pp.329-341
    • /
    • 2011
  • The object of this paper is to compare the accuracy and the characteristic of various methods of solving the geodetic inverse problem for the geodesic lines which be in the standard case and special cases(antipodal, near antipodal, equatorial, and near equatorial situation) on the WGS84 reference ellipsoid. For this, the various algorithms (classical and recent solutions) to deal with the geodetic inverse problem are examined, and are programmed in order to evaluate the calculation ability of each method for the precise geodesic determination. The main factors of geodetic inverse problem, the distance and the forward azimuths between two points on the sphere(or ellipsoid) are determined by the 18 kinds of methods for the geodetic inverse solutions. After then, the results from the 17 kinds of methods in the both standard and special cases are compared with those from the Karney method as a reference. When judging these comparison, in case of the standard geodesics whose length do not exceed 100km, all of the methods show the almost same ability to Karney method. Whereas to the geodesics is longer than 4,000km, only two methods (Vincenty and Pittman) show the similar ability to the Karney method. In the cases of special geodesics, all methods except the Modified Vincenty method was not proper to solve the geodetic inverse problem through the comparison with Karney method. Therefore, it is needed to modify and compensate the algorithm of each methods by examining the various behaviors of geodesics on the special regions.

Numerical Study of Acoustic Coupling between Combustion Chamber and Resonators in Liquid Rocket Engine (로켓엔진 연소기와 공명기간의 선형 음향 coupling에 관한 수치적 연구)

  • Park I-Sun;Sohn Chae-Hoon
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2005.11a
    • /
    • pp.407-410
    • /
    • 2005
  • Acoustic coupling between combustion chamber and gas-liquid scheme injectors are studied numerically in liquid rocket engine adopting linear acoustic analysis. The injectors can play a role as half-wave resonators. The combustion chamber with numerous injectors shows peculiar acoustic coupling with the injectors. As the injector length approaches a half wavelength or the original tuning length, new injector-coupled acoustic modes show up in the chamber and thereby, the acoustic-damping effect of the tuned injectors is appreciably degraded.

  • PDF

Analysis of Flow Characteristics of Supercavitating Cascade (수퍼캐비테이션 익열의 유동특성 해석)

  • 이명호;이종원
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.16 no.4
    • /
    • pp.803-810
    • /
    • 1992
  • With increases in the rotational speed of hydraulic machine, studies on the hydrodynamic characteristics of supercavitating cascade are important on the view of flow analysis and design of fluid machinery. In the present paper, the complex functions of nonlinear theory corresponding to the flow of supercavitating cascade can be obtained by distributing singulary singulary points such as sources, vortexes and doublets on hydrofoil and free streamline. The numerical calculations on the closed wake model and semi-closed wake model are carried out in order to show the flow characteristics around the supecavitating cascade with finite with finite cavity length. As the result of this study, the flow characteristics such as lift, drag and cavitation coefficients are predicted by the flow conditions of supercavitating cascade in the fluid machinery.