• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.683-690
• /
• 2015

In Rough set, attribute missing values have several problems such as reduct and core estimation. Further, they do not give some discernable pattern for decision tree construction. Now, there are several methods such as substitutions of typical attribute values, assignment of every possible value, event covering, C4.5 and special LEMS algorithm. However, they are mainly substitutions into frequently appearing values or common attribute ones. Thus, decision rules with high information loss are derived in case that important attribute values are missing in pattern matching. In particular, there is difficult to implement cross validation of the decision rules. In this paper we suggest new method for substituting the missing attribute values into high information gain by using entropy variation among given attributes, and thereby completing the information table. The suggested method is validated by conducting the same rough set analysis on the incomplete information system using the software ROSE.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.685-693
• /
• 2015

In this study, we found that it is necessary to use the relatively new resource from seaweed extracts to extract and process pulp and create a local brand that can contribute to the local fishermen, development of new bio material, establishment of natural infrastructure, and acquisition of foreign investment. This study's seaweed pulp separation process is very overwhelming as seaweed is a compound of glycoside and polysaccharide. Nevertheless, we intend to develop a purification process and introduce applied technology to explore a new applied technology of pulp process. Once this technology is fully developed and mass produced, it would contribute to greater exports and increasing income level for the local fishermen. The ultimate goal of this study is to gather technical data from the first and second years of application, apply seaweed pulp to increase bio effect, and develop new functional bio-plastic packaging material, raw material, and samples with special characteristics of high molecules.

• Journal of the Korea Convergence Society
• /
• v.3 no.4
• /
• pp.35-44
• /
• 2012

In this study, a simulation program is developed in order to investigate non steady-state cornering performance of 6WD/6WS special-purpose vehicles. 6WD vehicles are believed to have good performance on off-the-road maneuvering and to have fail-safe capabilities. But the cornering performances of 6WS vehicles are not well understood in the related literature. In this paper, 6WD/6WS vehicles are modeled as a 18 DOF system which includes non-linear vehicle dynamics, tire models, and kinematic effects. Then the vehicle model is constructed into a simulation program using the MATLAB/SIMULINK so that input/output and vehicle parameters can be changed easily with the modulated approach. Cornering performance of the 6WS vehicle is analyzed for brake steering and pivoting, respectively. Simulation results show that cornering performance depends on the middle-wheel steering as well as front/rear wheel steering. In addition, a new 6WS control law is proposed in order to minimize the sideslip angle. Lane change simulation results demonstrate the advantage of 6WS vehicles with the proposed control law.

• Journal of Conservation Science
• /
• v.6 no.2 s.8
• /
• pp.141-148
• /
• 1997

When we have entered high economic growth since 1970s, many archaeological excavations were performed all over the country. Excavated objects composed of variable materials are inevitably subjected to deformations owing to surrounding environments and storage conditions. Although the importance of conservation treatment of the objects is greatly increased, a few conservation laboratories are there comparing with excavation groups. The metallic objects excavated are very unstable and deformable state. So it is important not to allow iron objects, especially cast iron, to dry out once excavated. Because the corrosion reactions on the surface proceed rapidly, the objects may be destroyed at the moment. The conservation procedures of the excavated metallic objects are as follows: (1)It is stable on-site storage method for objects to keep vinyl film with envelop or to immerse alkaline solution to prevent the environmental changes. (2)The objects must be treated at once under suitable methods in the conservation laboratory after excavation. (3)The continued existence of objects depends on environmental factors such as relative humidities, regular inspection, light etc.

• Korean Journal of Poultry Science
• /
• v.16 no.2
• /
• pp.105-127
• /
• 1989

Although poultry industry in Japan has been much developed in recent years, it still needs to be developed , compared with developed countries. Since the poultry market in Korea is expected to be opened in the near future it is necessary to maximize the Productivity to reduce the production costs and to develop the scientific, technologies and management organization systems for the improvement of the quality in poultry production. Followings ale the summary of poultry industry in Japan. 1. Poultry industry in Japan is almost specized and commercialized and its management system is ： integrated, cooperative and developed to industrialized intensive style. Therefore, they have competitive power in the international poultry markets. 2. Average egg weight is 48-50g per day (Max. 54g) and feed requirement is 2. 1-2. 3. 3. The management organization system is specialized and farmers in small scale form complex and farmers in large scale are integrated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.213-216
• /
• 1995

공사장의 건설기계 소음은 저주파 에너지를 많이 가지고 있기 때문에, 일단 소음이 발생되면 그 전파가 멀리까지 감쇄없이 진행하는 물리적 특징을 가지고 있으며 현실적으로 흡음재처리를 통한 소음방지효과는 저조한 실정이다. 특히, 선진국에서는 건설기계 등의 엄격한 소음 인증제도 실시로 인해 국내 일부 건설장비 생산제품이 외국에서 요구하는 소음규제치를 초과하기 때문에 저소음, 저진동 건설기계 설계 기술의 발전이 없으면, 향후 수출여건이 점차 어려워지고 있다. 이와같은 주변여건의 변화로 인해 건설기계를 생산하는 입체에서는 공사장 소음과 같은 저주파 에너지에 의해 지배 받는 소음문제를 효과적으로 저감시키기 위한 건설기계의 저소음, 저진동 설계의 필요성을 심각하게 인식하고 있는 실정이다. 건설기계중, 소음이 문제시되는 기계로는 지반정지공사, 기초공사, 콘크리트공사, 포장공사, 파괴 및 해체공사와 기타등 6가지가 있다. 이중에서 환경연구원의 연구결과에 따르면, 항타기, 브레이커 및 착암기가 높은 소음도를 나타내고 있다. 가장 높은 소음을 배출하고 있는 항타기는 기초 공사에 쓰이는 것으로써 지반 천공후 H빔을 싣는 디젤 항타기의 경우, 소음도가 107dBA를 보여주고 있다. 이 값은 기계로부터 7m 떨어진 거리에서 측정된 값이다. 또, 파괴 및 해제공사에 쓰이는 브레이커는 98dBA의 소음도를 보여주고 있다. 착암기는 작용원리에 따라 91-96dBA의 소음을 배출하고 있다. 본 연구에서는 건설기계중 소음이 높아 문제시 되고 있는 유압 브레이커의 저소음 설계기술개발에 관한 내용이다. 저소음 브레이커의 개발을 위해 소음에너지의 전달경로를 검토하고, 현실성있는 소음방지 대책을 제시하였다. 연구결과, 브레이커의 설계개량을 통해, 10dB의 소음저감효과를 볼 수 있어 만족스러운 결과를 도출할 수 있었다.타를 처리하기에는 부적절한 방법임이 널리 알려진 사실이다[3]. 최근에 Ben Mrad와 Fassois[4]는 신호에 잡음이 존재하여도 이를 잘 처리할 수 있는 확률적(stochastic) 방법을 개발하여 기존의 결정적 방법들과 그 결과를 비교하였다. 그러나, 개발된 방법은 응답 신호에 백색잡음(white noise)이 섞이는 특수한 경우에만 사용할 수 있게 만들어져서 이 방법의 실질적인 적용에는 어려움이 있다. 본 연구에서는 기존의 방법들의 단점을 극복할 수 있는 새로운 회귀적 모우드 변수 규명 방법을 개발하였다. 이는 Fassois와 Lee가 ARMAX모델의 계수를 효율적으로 추정하기 위하여 개발한 뱉치방법인 Suboptimum Maximum Likelihood 방법[5]를 기초로 하여 개발하였다. 개발된 방법의 장점은 응답 신호에 유색잡음이 존재하여도 모우드 변수들을 항상 정확하게 구할 수 있으며, 또한 알고리즘의 안정성이 보장된 것이다.. 여기서는 실험실 수준의 평 판모델을 제작하고 실제 현장에서 이루어질 수 있는 진동제어 구조물에 대 한 동적실험 및 FRS를 수행하는 과정과 동일하게 따름으로써 실제 발생할 수 있는 오차나 error를 실험실내의 차원에서 파악하여 진동원을 있는 구조 물에 대한 진동제어기술을 보유하고자 한다. 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on both inflection

• Journal of Sericultural and Entomological Science
• /
• v.53 no.2
• /
• pp.87-91
• /
• 2015

There is no specific data on Entomogenous fungus (DongChungHaCho) in accordance with the silkworm varieties, despite of very high value industrial use as functional materials at domestic and abroad. In this study, we investigated culture condition and characteristics of Paecilomyces tenuipes in 3 silkworm cultivars and 2 specific silkworm breeds. Infection rate of P. tenuipes for silkworm varieties was the highest Kumokjam, followed by Baegokjam, Daeseongjam, Golden silk, Yeonnokjam in that order. The optimum culture conditions were as follows: dark condition, $22^{\circ}C{\pm}1$, and about $4cm^2$ in planting density per pupa. Also, we have developed annual production technologies of P. tenuipes. First, in order that the moisture content of the infection pupa became 3% or less in the natural condition. Second, the dried pupa must be vacuum-packed and was kept under $4^{\circ}C$. Finally, by restoring the moisture content of the dried pupa and culture in optimal condition, the technique for annual production of the P. tenuipes was achieved. Therefore, we expect that the use of Kumokjam and annual production technique will contribute significantly to farm income.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.595-599
• /
• 2011

'Goami 3' is a new japonica rice cultivar developed from a cross between Suweon464 and Daeanbyeo by the rice breeding team of National Institute of Crop Science, RDA. 'Goami3' has about 130 days growth duration from transplanting to heading in central plain area of Korea. It has a good semi-erect plant type and resistance to lodging of about 79 cm in culm length. 'Goami 3' had 15 panicles per hill and 104 spikelets per panicle. 'Goami 3' has very high amylose (29.5%) and high non-dietary starch compared with Hwaseongbyeo. This rice variety has slow senescence and 47% tolerance to viviparous germination during the ripening stage. 'Goami 3' is susceptible to leaf blast, bacterial blight, virus disease and insect pest. The yield performance of this cultivar in milled rice was about 3.92MT/ha by ordinary season culture in local adaptability test from 2005 to 2007. 'Goami 3' is adaptable to central and southern plain area of Korea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.1
• /
• pp.170-176
• /
• 2002

The objective of this study was to investigate the current status of calcium fortification in processed foods for obtaining basic data on nutrition fortification policy and nutrition labeling, Surveyed samples were the products fortified wish calcium among processed products sold in department store and large mart in Seoul from Aug. 1998 to Aug. 1999. But supplementary health food or special nutritious food and weaning food and infant formula were excluded from them. We examined the kinds and numbers of added nutrients except calcium and the amounts of calcium per 100 g product and nutrient labeling of calcium-fortified foods. Surveyed products were 81 foods and they were grouped in grain products, milk and milk products, processed meat and fishes, ramyuns, retort pouch foods, fruit juice and drinks. and others. Calcium fortification was found in wide food groups, especially in snack foods and carbonated beverages. In relation to surveyed products, most of them were fortified with only calcium. The number of added nutrients in the product were relatively various in comparison with each food groups. In addition to calcium, the most frequently added nutrient was DHA, and were followed vitamin, mineral, oligosacchride, fiber, etc. This result showed that the kind(s) and the number(s) of nutrient added to product did not consider nutrition balance of calcium-fortified foods. Units of calcium content were decided by companies, therefore consumers confused labelled content with mouth dose of calcium and the comparison of the amounts added calcium among products was difficult. The amounts of calcium in products were from 16.4 to 1226 mg Per 100 and from 2.5 to 27.6% RDA (recommended daily allowance) per serving size. The amounts of calcium in many products were less than 10% RDA per serving size, whole appraisal about fortified content was needed. And for nutrient labeling on calcium, they used various term whether it is approved by law or not.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.2
• /
• pp.143-148
• /
• 2017

Soybean [Glycine max (L.) Merr.] seed is an important dietary source of protein, oil, carbohydrates, isoflavones, and other nutrients for humans and animals. Raffinose and stachyose are the main antinutritional factors in soybean seed. They are carbohydrates belonging to the raffinose family of oligosaccharides, which are not readily digested in humans and cause flatulence or diarrhea. The genetic reduction of the raffinose and stachyose contents in mature soybean seeds will improve the nutritional value of soybean. The objective of this research was to evaluate agronomic traits with 10 $F_6$ strains selected from breeding populations derived from a cross among seven parents. The contents of raffinose and stachyose in mature seeds were detected by high-performance liquid chromatography. Agronomic traits such as flower color, flowering date, harvesting date, lodging, plant height, seed coat color, hilum color, 100 seed weight, and yield were evaluated. Ten intermediate parents showed low raffinose and stachyose contents. The intermediate parent 883-1 had a small seed size, six intermediate parents (15A1, 15D1, RS-5, RS-33, RS-64, and RS-70) had a medium seed size, and two intermediate parents (14G20 and RS-21) had a large seed size. The intermediate parent RS-21 had a black seed coat and a green cotyledon. Four intermediate parents (883-1, 14G20, RS-5, and RS-21) had elite agronomic traits. The new intermediate parents developed through this study will be used to develop improved soybean cultivars with low contents of raffinose and stachyose.