Proceedings of the Korean Society of Dyers and Finishers Conference
/
2012.03a
/
pp.66-66
/
2012
최근 환경파괴, 병원성 세균감염 등 각종질병과 환경문제로 인한 피부염 등 우리 몸을 보호하기 위하여 친환경 소재의 용품들이 소비자들의 이목을 끌고 있다. 또한, 부가가치를 높이고 특수한 기능성을 나타내는 기능성 섬유에 대한 관심이 증가하고 있으며 이러한 기능성 섬유들 중에서 항균성을 가지는 천연섬유를 주제로 연구를 진행하고 있다. 대표적인 천연섬유인 면 직물에 Zinc alginate로 코팅시켜 부가적인 기능들을 부여시키는 방법으로 실험을 진행하였다. 미처리 면직물과 Zinc alginate가 코팅 된 면직물을 서로 비교하여 분석하였다. 증류수와 생리식염수로 흡습량과 흡습시간을 동시에 측정 후 비교하였으며 접촉각은 Contact angle system OCA20을 이용하여 측정하였다. Zinc alginate의 흡착량은 EDS(EX-250, HORIBA, Japan)를 이용하여 확인하였다. 표면과 단면의 형태는 주사전자현미경(S-4100, Hitachi Co., Japan)으로 x300, x500 배율로 측정하였다.
Journal of the Korean Society of Manufacturing Process Engineers
/
v.15
no.6
/
pp.16-23
/
2016
This study was carried out to investigate how grade level and experiences when taking courses affect the creativity of engineering students in a Korean college. The sample group consisted of 372 engineering students of which 49.5% were first graders, 15.6% second graders, 22.6% third graders, and 12.4% fourth graders. They conducted self-report measures on a domain-general and domain-specific view of creativity. The engineering creativity test, developed by Kang and Yune (2015), is based on the domain-specific view of creativity and consists of four sub-factors: creative attitude, knowledge research, interest in engineering, and team work ability. The domain-general creativity test consists of three sub-factors. Analysis of the results led to the following conclusions: First, we found significant differences in engineering creativity between students depending on experiences in taking courses and tests; and, second, we discovered significant differences in integrative creativity among students depending on experiences in taking courses and tests, and/or grade level. These conclusions suggest that we should develop and apply appropriate strategies to enhance creativity in engineering education.
Transactions of the Korean Society of Mechanical Engineers A
/
v.38
no.1
/
pp.59-63
/
2014
Elliptical gears are used in the oval flowmeter and oval flow meter inspects volume of water thanks to space by the elliptical shape. The purpose of this study is to judge accuracy of processing of the elliptical gear and develop inspection system using machine vision. Demand of machine vision is increasing while the factory automation is spreading and principle factor in-process inspection. But, gear inspection using the machine vision rarely used because of complex shape of gear. In this study, it seems possible that elliptical gear is inspected by inspection software using machine vision and inspection program can judge accuracy of processing of the elliptical gear designed this study.
Kim, Jun-su;Kim, Gi-ryang;Kim, Hyun-soo;Jeong, Tae-il;Kim, Gwan-hyung;Lee, Hyung-ki
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2015.10a
/
pp.1058-1059
/
2015
최근 건축 구조물 설계에 있어서 외부 또는 내부로부터 발생될 수 있는 미지의 진동에 대하여 대책을 수립하여 구조물을 설계하고 있다. 뿐만 아니라 기타 제조업 분야에 있어서 정밀할 가공이 필요한 특수한 기계 가공기에 있어서 내부 또는 외부에서 발생될 수 있는 진동을 감안하여 시스템을 구성하고 있다. 이러한 구조물 및 기계시스템에 대하여 진동을 억제할 수 있는 진동 억제 알고리즘에 관해서는 많이 연구되고 있다. 본 논문에서는 구조물 및 기계시스템에서 발생될 수 있는 미지의 외란을 제거하기 위하여 내부모델제어(IMC)를 기반으로 수정된 적응 알고리즘을 매트랩 시뮬링크(matlab simulink)를 통하여 제어성능을 제시하고자 한다.
Kim, Seong-Hwan;Yang, Ji-Hun;Jeong, Jae-Hun;Byeon, In-Seop;Jeong, Jae-In
Proceedings of the Korean Institute of Surface Engineering Conference
/
2016.11a
/
pp.99-99
/
2016
최근 공구산업은 산업 발전으로 공구의 사용 환경이 가혹화 되고, 첨단산업용 특수합금들이 발달하면서 이를 가공할 수 있는 새로운 절삭공구소재들이 개발되어지고 있다. 또한 고성능 절삭공구는 공구소재보다 코팅개발이 상대적으로 더욱 효과적이기 때문에 코팅 기술 개발이 활발히 진행되고 있다. 최근 일본에서는 새로운 코팅층 물질 개발보다는 기존의 코팅물질을 조합하거나 개량하여 성능을 향상시키는 추세이며, 이는 현재 공구산업의 효율적인 개발방향을 제시하고 있다. 기존의 빗각 증착은 기판의 각도를 변경하여 증기가 기판에 비스듬하게 입사하도록 조절하여 코팅하는 기술로 박막의 조직을 다양하게 제어하는 것이 가능하며, 구조 제어를 통한 완전화 박막을 이용한 one-batch 다기능 구현을 위하여 많은 연구가 진행되고 있다. 가공이 까다로운 소재를 가공하기 위한 공구에 적용하기 위해서 Al의 함량이 높은 AlTiN 소재가 개발되어 적용되고 있으며, 이 소재는 공구의 수명향상을 위한 표면처리 소재로 각광을 받고 있다. 본 연구에서는 음극아크 증착 시 거대입자가 박막에 증착되어 결함을 만들기 때문에 그 밀도를 낮추기 위해서 음극 아크 증착을 이용하여 공정 변화에 따른 AlTiN 박막의 표면형상을 관찰하고 특성을 평가하였다. 또한 빗각 증착을 적용하여 제작한 AlTiN 박막의 특성을 평가하였다. 고 함량의 AlTi합금 타겟을 음극 아크 소스에 장착하여 AlTiN 박막을 코팅하였다. 시편은 스테인리스강판(SUS304)과 초경(tungsten carbide; WC)을 사용하였다. 음극 아크 소스에 인가되는 전류가 낮을수록 AlTiN 박막 표면에 거대입자의 밀도가 낮아졌으며, 기판 전압과 공정압력이 높을수록 AlTiN 박막의 표면에 존재하는 거대입자의 밀도가 낮아지는 경향을 보였다. 이를 통하여 거대입자밀도를 낮추는 기초공정을 도출하였다. AlTiN 박막 제작 시 빗각을 적용한 결과 $60^{\circ}$의 빗각을 적용한 다층 박막에서 상대적으로 가장 높은 경도 값을 보였다. 본 연구를 통해 음극 아크 증착을 이용하여 거대입자의 밀도가 낮은 박막을 제작할 수 있는 공정을 도출하였고, 빗각증착을 적용하면 경도가 향상되는 결과를 확인하였다.
Kim, Jung-Gon;Ryu, Jung-Jae;Lim, Ji-Hye;Kim, Young-Un;Park, Yong-Wan;Ko, Jung-An;Kim, Eui-Hwa
Proceedings of the Korean Society of Dyers and Finishers Conference
/
2011.11a
/
pp.45-45
/
2011
최근 환경과 건강에 대한 관심이 증대되면서, 복합기능을 갖는 다기능성 섬유에 대한 요구가 증대되고 있는 실정이다. 일반적으로 기능성은 마이크로캡슐이나 후가공제를 이용하여 일반 섬유 제품에 적용하고 있다. 마이크로캡슐이나 후가공제가 적용된 일반 섬유제품은 일상생활 속에서의 마찰 및 세탁 등으로 인해 기능 저하가 발생된다. 이러한 문제점을 개선하기 위해 특수 방사 기술을 이용하여 다기능성을 갖는 섬유 제조 기술이 개발되고 있다. 다기능성 섬유소재 및 응용제품은 그 제조 공정성이 우수하고, 염색 가공 등의 후 공정 조건에 의해 기능성 저하를 초래하지 않고, 지속시간이 오래 유지해야하는 조건을 만족해야한다. 이러한 기능성 저하 문제를 해결하고 내구성 향상 및 기능성의 지속 시간을 오래 유지하기 위하여 복합 방사 기술을 이용하여 이형 단면 원사, Sheath-Core 단면 원사 등이 개발되고 있다. 개발된 기능성 원사의 경우 일반 원사와 다른 형태의 염색성을 보일 수 있으며, 염색 온도 및 염색 시간 등 염색 조건이 달라질 수 있다. 본 연구에서는 식물 등에서 추출한 천연 항균 유기물을 마이크로캡슐화하여 이형단면의 심부에 담지된 형태인 Sheath(Nylon: 50%)-Core(PP MB: 50%) 원사의 염색성 평가 시험을 실시하였다. 시험 방법은 Sheath-Core 원사와 일반 Nylon 원사와 염착 거동 시험을 통해 비교해 나타냈고, 염색 전 후의 물성을 비교해보았다. 또한 염색성 평가 시험을 토대로 기능성 원사의 염색 온도와 시간에 따른 색차 비교 시험을 통해 기능성 원사의 염색 조건을 선정하는 시험을 실시하였다.
태양전지는 태양광을 직접 전기로 변환하는 소자로서, 무공해 신재생 에너지로 각광받고 있다. 이러한 태양전지의 상용화를 위하여 발전효율과 경제성을 높이기 위한 많은 연구가 진행되고 있으며, 특히 도심형 건물의 외장재를 태양전지로 활용하는 건물통합형 태양광 발전 (BIPV : building integrated photovoltaics)등에 대한 연구가 활발하다. 따라서, 본 조사 연구에서는 태양전지 기판소재의 요구특성을 조사하고, BIPV용으로 적용 가능한 유연한 금속기판의 개발을 위한 기술적 방법을 제시하고자 하였다. 현재 태양전지의 기판은 비정질 혹은 결정질 실리콘 기판과 라임유리 기판이 주로 사용되고 있으며, 특수용도로 고가의 폴리이미드 고분자 필름이 사용되고 있다. 그러나 BIPV의 다양한 응용을 위해서는 저가의 유연한 기판이 절실히 요구되고 있다. 스테인레스 금속박판은 인성 및 강도가 우수하고, 유연하여 다양한 형태로 가공이 가능하며, 가격이 저렴하고, 다양한 표면개질기술이 적용될 수 있다.
Transactions of the Korean Society of Mechanical Engineers
/
v.15
no.1
/
pp.41-48
/
1991
A set of constitutive equations is formulated to predict elastic-plastic strain hardening response of sintered porous iron under combined tension and torsion. The proposed constitutive equations were capable of predicting characteristic behaviors of porous metals. Agreement between theoretical curves and experimental data for elastic-plastic response of sintered porous iron was very good for various initial porosities.
The mechanical properties of specialty cellulose fiber reinforced concrete and the contribution of specialty cellulose fiber to drying shrinkage crack reduction potential of concrete and theirs evaluation are presented in this paper. The effects of differing fiber volume fraction(0.03%, 0.06%, 0.08%, 0.1%, 0.15%, 0.2%) were studied. The results of tests of the specialty cellulose fiber reinforced concrete were compared with plain and polypropylene fiber reinforced concrete. Flexural performance(flexural strength and flexural toughness) test results indicated that specialty cellulose fiber reinforcement showed an ability to increase the flexural performance of normal- and high- strength concrete(as compared to plain and polypropylene fiber reinforced concrete). Optimum specialty cellulose fiber reinforced concrete were obtianed using 0.08% fiber volume fraction. Drying shrinkage cracking test results confirmed specialty cellulose fibers are effective in reducing the drying shrinkage cracking of normal and high-strength concrete(as compared to popylene fiber reinforced concrete).
Journal of the Korea Academia-Industrial cooperation Society
/
v.3
no.4
/
pp.290-294
/
2002
This study is object to semiconductor cavity block production technology using CAD/CAM. Semiconductor packaging is require to the high intensity, high temperature and good metals. That raw metals name is ASP23 and high price. This results are propose to one direction of semiconductor cavity block production technology.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.