• Title/Summary/Keyword: 특성화 요소

Search Result 2,021, Processing Time 0.032 seconds

Assessment of Slip Sinkage of an Off-Road Tracked Vehicle from Model Track Experiments (모형궤도시험을 통한 야지궤도차량의 슬립침하 평가)

  • Baek, Sung-Ha;Shin, Gyu-Beom;Chung, Choong-Ki
    • Journal of the Korean Geotechnical Society
    • /
    • v.34 no.6
    • /
    • pp.49-59
    • /
    • 2018
  • When a tracked vehicle travels off-road, shearing action and ground sinkage occur on the soil-track interface and severely affect tractive performance of the tracked vehicle. Especially, the ground sinkage, which is induced by vehicle's weight (hereinafter referred to as static sinkage) and longitudinal forces in the direction of travel producing slip (hereinafter referred to as slip sinkage), develops soil resistance, directly restricting the tractive performance of an off-road tracked vehicle. Thus, to assess the tractive performance of an off-road tracked vehicle, it is imperative to take both of static sinkage and slip sinkage into consideration. In this research, a series of model track experiments was conducted to investigate the slip sinkage which has not been clarified. Experiment results showed that the slip sinkage increased with increasing the slip ratio, but the increasing rate gradually decreased. Also, the slip sinkage was found to increase as relative density of soil decreased and imposed vertical load increased. From the experiment results, the normalized slip sinkage defined as slip sinkage to static sinkage calculated in the identical condition was investigated, and an empirical equation for the slip sinkage was developed in terms of slip ratio, which allows vehicle operators to predict the slip sinkage in a given soil and operating conditions.

Contents Analysis of the Elderly Housing in the Unit "Family Life & Housing" - Focused on the 9th Grade Textbooks of Technology & Home Economics - (주생활 단원에서의 노인주거 관련 교과내용 분석 - 중학교 3학년 기술.가정 교과서를 중심으로 -)

  • Jang, Sang-Ock
    • Journal of Korean Home Economics Education Association
    • /
    • v.20 no.2
    • /
    • pp.31-46
    • /
    • 2008
  • The purpose of this study is to analyze the contents of elderly housing in the unit "Family Life & Housing" in Technology & Home Economics 9th grade textbooks. The results of this study are as follows: First, the contents, illustrations, pictures, floor-plans, graphs and tables in current unit "Family Life & Housing" varied widely among textbooks and some didn't even contain these informations. Illustrations and pictures which are suit to the content and which contain positive image of space and living should be chosen. Second, most of the contents about elderly housing were concentrated on the life cycle, three-generation housing and universal design, discussed in chapter 'utility of living space.' The unification of overlapped contents and description which don't have stereotype about elderly housing are needed. Not only the interior environment but also the exterior environment of the elders and life-support service for them should be included in the contents. Contents that reflect the change of future population composition and the ratio of three-generation household are required. The elderly housing floor plan needs to be diversified in quantity such as ones which reflect the Korean characteristics or ones which enable person an independent life.

  • PDF

A mechanism for end-to-end secure communication in heterogeneous tactical networks (이기종 전술통신망 종단간 암호화 통신을 위한 메커니즘)

  • Park, Cheol-Yong;Kim, Ki-Hong;Ryou, Jae-Cheol
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.24 no.4
    • /
    • pp.625-634
    • /
    • 2014
  • Tactical networks is being operated in configuration that consisting of a variety of characteristics communication equipments and heterogeneous networks. In this configurations, end-to-end communication can be achieved using interworking gateway for converting the data format of the network and using encryption algorithm of the networks. The use of mechanism results in a problem that secure data cannot be transferred directly, reprocessing and processing delay of communication in heterogeneous tactical networks. That is, for encoding and decoding of data, the decryption of encrypted data and re-encryption processing must be required at the gateway between different networks. In this paper proposes to mechanism for end-to-end secure communication in heterogeneous tactical networks. Using the proposed method, end-to-end secure communication between heterogeneous tactical networks(PSTN-UHF networks) which removes the necessity of a gateway for converting data into data formats suitable for network to remove a transmission delay factor and enable real-time voice and data communication and achieve end-to-end security for heterogeneous tactical networks. we propose a novel mechanism for end-to-end secure communication over PSTN and UHF networks and evaluate against the performance of conventional mechanism. Our proposal is confirmed removal of security vulnerabilities, end-to-end secure communication in heterogeneous tactical networks.

A Study of Rayleigh Damping Effect on Dynamic Crack Propagation Analysis using MLS Difference Method (MLS 차분법을 활용한 동적 균열전파해석의 Rayleigh 감쇠영향 분석)

  • Kim, Kyeong-Hwan;Lee, Sang-Ho;Yoon, Young-Cheol
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.29 no.6
    • /
    • pp.583-590
    • /
    • 2016
  • This paper presents a dynamic crack propagation algorithm with Rayleigh damping effect based on the MLS(Moving Least Squares) Difference Method. Dynamic equilibrium equation and constitutive equation are derived by considering Rayliegh damping and governing equations are discretized by the MLS derivative approximation; the proportional damping, which has not been properly treated in the conventional strong formulations, was implemented in both the equilibrium equation and constitutive equation. Dynamic equilibrium equation including time relevant terms is integrated by the Central Difference Method and the discrete equations are simplified by lagging the velocity one step behind. A geometrical feature of crack is modeled by imposing the traction-free condition onto the nodes placed at crack surfaces and the effect of movement and addition of the nodes at every time step due to crack growth is appropriately reflected on the construction of total system. The robustness of the proposed numerical algorithm was proved by simulating single and multiple crack growth problems and the effect of proportional damping on the dynamic crack propagation analysis was effectively demonstrated.

Discussion on Formulation Process and Configuration of Fire-Fighting Vulnerable Zone Model (소방취약지 모델의 구성과 정립프로세스 논의)

  • Kim, Seong Gon;Chang, Eun Mi;Choi, Gap Yong;Kim, Hi Tae
    • Spatial Information Research
    • /
    • v.22 no.3
    • /
    • pp.71-77
    • /
    • 2014
  • There are numbers of unpredictable risk factors in the disaster scenes such as fire, explosion and fail to early life-saving or holding the flames which can lead to massive damage. In particular, fire-fighters who arrive on the scene within 5 minutes after dispatching, have a limitation to get aware to the situation of scene fully, because of immediate deploy to disaster scene with limited information. This situation may lead to disturbance that fire-fighters perform effective fire-fighting activities, to put fire-fighter's life at risk by misjudge the situation. Previous domestic and International studies focused vulnerability for spatial area or features which can damage to life and property in the event of anticipated. In this study, we have been developed fire-fighting vulnerable zone model that can analyze comprehensively hindrance factors for fire-fighting activities targeting whole life cycle of fire-fighting activities from dispatch to fire suppression or life-saving. In addition, we have been given shape to finality and applicability for our model by defining the new concept of fire-fighting vulnerable zone which can be distinguished from the concept of fire vulnerable area in previous studies. The results of this study can be used to analysis fire-fighting vulnerable zone type analysis, establish fire-fighting policies and improve the performance of decision-making process.

Shape Optimization of Three-Way Reversing Valve for Cavitation Reduction (3 방향 절환밸브의 공동현상 저감을 위한 형상최적화)

  • Lee, Myeong Gon;Lim, Cha Suk;Han, Seung Ho
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.39 no.11
    • /
    • pp.1123-1129
    • /
    • 2015
  • A pair of two-way valves typically is used in automotive washing machines, where the water flow direction is frequently reversed and highly pressurized clean water is sprayed to remove the oil and dirt remaining on machined engine and transmission blocks. Although this valve system has been widely used because of its competitive price, its application is sometimes restricted by surging effects, such as pressure ripples occurring in rapid changes in water flow caused by inaccurate valve control. As an alternative, one three-way reversing valve can replace the valve system because it provides rapid and accurate changes to the water flow direction without any precise control device. However, a cavitation effect occurs because of the complicated bottom plug shape of the valve. In this study, the cavitation index and percent of cavitation (POC) were introduced to numerically evaluate fluid flows via computational fluid dynamics (CFD) analysis. To reduce the cavitation effect generated by the bottom plug, the optimal shape design was carried out through a parametric study, in which a simple computer-aided engineering (CAE) model was applied to avoid time-consuming CFD analysis and difficulties in achieving convergence. The optimal shape design process using full factorial design of experiments (DOEs) and an artificial neural network meta-model yielded the optimal waist and tail length of the bottom plug with a POC value of less than 30%, which meets the requirement of no cavitation occurrence. The optimal waist length, tail length and POC value were found to 6.42 mm, 6.96 mm and 27%, respectively.

항만개발에 의한 조석조류 및 수질변화 예측을 위한 시뮬레이션 모델 연구

  • 박석순;김소연;이진희
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 1997.04a
    • /
    • pp.114-114
    • /
    • 1997
  • 항만개발 사업은 매립이나 준설과 같은 해안선과 해저지형을 변화시키는 공사가 이루어지며 이는 조석조류 현상의 변화를 유발하게 된다. 특히 해안지형이 복잡한 항만이나 하구에서는 변화정도가 크게 나타나며 방파제나 선박접안 시설과 같은 항내 구조물을 축조 할 경우에도 조석조류 변화가 야기된다. 조석조류 현상의 변화는 해양 수질과 생물상에 영 향을 줄뿐만 아니라 인접한 육지에 이르기까지 크다란 피해를 유발할 수가 있다. 창조시 해 수를 육지로 범람하게 하거나 퇴적이나 침식조건을 변화시킬 수도 있으며 오염물질이 외해 로 확산되는 과정을 방해하고 해양생물의 서식조건을 악화시켜 부근 해역의 어업에 피해를 유발할 수도 있다. 또한 해안 공사 과정에 해수로 유입되는 토사나 항만 이용시에 배출되는 폐수 등이 항내 수질과 생태계를 변화시킬 수 있다. 따라서 조석조류와 수질변화를 사전에 예측하고 이를 최소화하는 방안이 강구되어야 한다. 조석조류와 수질 변화를 사전에 예측하 는 방법으로 축소모형 실험과 컴퓨터 시뮬레이션이 사용된다. 축소모형 실험은 현장을 재현 하는데 많은 경비와 시간이 소모되며 예측에 한계가 있다. 반면에 컴퓨터 시뮬레이션은 대 상해역의 지형과 조류 그리고 수질특성에 적합하게 모델을 개발할 경우 예측력이 매우 높기 때문에 현재 가장 널리 이용되고 있다. 본 연구는 유한 요소법에 기초하여 미국 공병단 (United States Army Corps of Engineers)에서 개발한 TABS-2 모델을 이용하여 온산항에 서 시행되는 부두건설에 따른 조석조류 및 수질변화를 시뮬레이션하였다. 측정된 자료로 모 델 계수를 보정하고 검증하였으며 항내 매립과 준설이 이루어질 때 나타나는 조위와 조속변 화를 예측하였다. 매립과 준설공사시 유출되는 토사가 조석조류현상에 따라 이동 확산되는 범위와 농도분포를 예측하였다.ophobic components)은 75~80%, 친수성 물질(hydrophilic components)은 30~33%정도의 분포를 보였고, 전염소 및 전오존 공정을 거친 처리수에서는 각각 62.2-62.8%, 43.9~49.0% 및 50~ 55%, 40~57% 정도의 분포를 보였다. 그리고 웅집-침전을 거친 처리수에서는 그 분포가 77~82%, 24-48%였다. 전주리 공정을 통하여 소수성 물질(byoghobic components)의 분포가 감 소하는 것을 볼 때 전염소 및 전오존 처리가 용존유기물의 응집에는 오히려 역 효과를 나타내는 것으로 판단된다. 것으로 판단된다.여 황토 2g에 대하여 Hieltijes and Lijklema 방법에 의해 Adsorbed-p, Nonapatite inorganic-P(NAI-P), Apatite-p, Organic-P로 구분하여 분석하고, 총인(Total Phosphorus)을 Standard Methods에 따라 Persulfate digestion후 0.45 m membrane 여지 여과하여 여액에 대해 PO3-4-P의 농도를 Ascorbic Acid 법으로 측정한 결과, NAI-P가 가장 큰 비율을 차지하였고, 부원료로 첨가된 금속 양이온 중 Fe3-이온이 흡착에 기여하는 정도가 가장 큰 것으로 평가되었다.다당류 T-AS의 보체 활성화 기작은 classical과 alternative complement pathway의 양 경로를 통해 활성화 되었다. T-AS 분획은 mouse내의 특정 혈청단백을 증가시켰으며, 항체 생성능의 증가가 관찰되어 effect T 세포의 활성화가 나타나고 있음을 알 수 있었다. T-AS는 생체내 투여시에 대식세포의 탐식능이 증진되었으며, 대식세포 기능 저해제에 의한 대식세포의 기능 저해 현상이 회복되었다. 이와 같은 결과들로부터, T-AS의 항암 활성은 활성

  • PDF

A Study on Philosophy-based Human Resource Model in the Service Economy Era (철학기반의 서비스경제시대 인재상 연구)

  • Kim, JeaYoung;Kim, Hyunsoo
    • Journal of Service Research and Studies
    • /
    • v.10 no.3
    • /
    • pp.119-138
    • /
    • 2020
  • Unlike the era of manufacturing-oriented industrial economy in the past, the era of service economy has characteristics intangible goods center, knowledge universalization, and expansion of needs, and many things that are of the economy are changing. In the past, the change in the environment was not fast, so even after analyzing the changed environment and deriving the talent needed for the company, it was possible to maintain a talent for the organization for a long time, so it is not proactive to build and apply talent. It became difficult to manage effectively. Therefore, in this paper, we conducted a normative study for deriving a desirable talent model rather than a descriptive human resource model. Human resources image suitable for the modern service economy era, the modern economic society and modern spirit were analyzed and reflected. The model in which the two opposing members of the organization, managers and employees, interact intensely and balance dialectically. A desirable talent in a modern organization must play the role of a manager, and the management and talent models in a modern organization can be said to be connected to each other like the front and back sides of a coin. The philosophy of human resources was presented in five dimensions: human, historical, social, economic, and management. The human resource model from eight factors: mastery, rationality, wisdom, customer orientation, innovation, flexibility, autonomy, collaboration. This study suggested that general talent model may vary depending on the company's type, empirical follow-up studies are needed the talents in each company in the future.

Process Networks of Ecohydrological Systems in a Temperate Deciduous Forest: A Complex Systems Perspective (온대활엽수림 생태수문계의 과정망: 복잡계 관점)

  • Yun, Juyeol;Kim, Sehee;Kang, Minseok;Cho, Chun-Ho;Chun, Jung-Hwa;Kim, Joon
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.16 no.3
    • /
    • pp.157-168
    • /
    • 2014
  • From a complex systems perspective, ecohydrological systems in forests may be characterized with (1) large networks of components which give rise to complex collective behaviors, (2) sophisticated information processing, and (3) adaptation through self-organization and learning processes. In order to demonstrate such characteristics, we applied the recently proposed 'process networks' approach to a temperate deciduous forest in Gwangneung National Arboretum in Korea. The process network analysis clearly delineated the forest ecohydrological systems as the hierarchical networks of information flows and feedback loops with various time scales among different variables. Several subsystems were identified such as synoptic subsystem (SS), atmospheric boundary layer subsystem (ABLS), biophysical subsystem (BPS), and biophysicochemical subsystem (BPCS). These subsystems were assembled/disassembled through the couplings/decouplings of feedback loops to form/deform newly aggregated subsystems (e.g., regional subsystem) - an evidence for self-organizing processes of a complex system. Our results imply that, despite natural and human disturbances, ecosystems grow and develop through self-organization while maintaining dynamic equilibrium, thereby continuously adapting to environmental changes. Ecosystem integrity is preserved when the system's self-organizing processes are preserved, something that happens naturally if we maintain the context for self-organization. From this perspective, the process networks approach makes sense.

growth of Cadmium Sulfide (CdS) Thin Film by Solution Growth Technique and Study of Quantum Size Effects (용액성장법에 의한 Cadmium Sulfide(CdS) 박막 성장 및 양자 사이즈 효과에 관한 연구)

  • 임상철
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.4 no.1
    • /
    • pp.1-12
    • /
    • 1997
  • 본 연구에서는 용액성장법에 의해 양자 입자로 구성된 CdS 박막을 슬라이드 유리기 판위에 성장시키고 이들의 구조적 광학적 특성에 대하여 연구하였고 이들 결과를 토대로 용 액성장법으로 성장된 CdS 박막의 양자 사이즈 효과에 대하여 연구하였다. 성장시간은 1, 3, 10, 20분이었고 성장온도는 75$^{\circ}C$였다. X-선 회절 분석결과 본 연구에서 합성된 CdS 박막은 hexagonal상의 결정구조를 갖는 것으로 나타났고 성장시간에 따라 막의 투께는 61~195nm, 입자사이즈는 8.5~22.5nm로 나타났다. 광에너지 변화에 따른 투과도 측정결과 본 연구의 CdS 시료는 성장시간에 따라 에너지 밴드갭이 2.43~2.51 eV로 나타나서 벌크 CdS의 에너 지 밴드갭인 2.42 ev보다 높은 에너지 밴드갭을 갖게 되어 양자 사이즈 효과에 의한 blue shift 현상이 용액성장법에 의해 합성된 CdS 시료에도 존재한다는 것이 밝혀졌다 그리고 이 같은 용액성장법으로 성장된 CdS에 대해 최초로 수행된 Raman 산란 실험결과 이성장방법 으로 성장된 CdS에는 1TO, E2, 1LO 포논 모드가 존재함을 알수 있었고 또한 입자 사이즈 감소에 의한 1LO포논 모드의저주파수 shift 현상 즉 포논 모드의 softening 현상이 있음이 밝혀졌고 softening은 최대6.2%까지 발생하였다. 이와같은 높은 softening은 본연구의 CdS 박막 내 양자 입자의 입도가 작은것에 기인하는 것으로 밝혀졌다. 또한 본 CdS 시료의 양 자 사이즈 효과의 결과로 1TO 포논도 나타났는데 이 1TO 포논과 E2 포논의 Raman shift 는 성장시간 즉 막의 두께와는 무관한 것으로 나타났다.행렬모형(二重比例行列模型)을 이용하여, 산업구조의 변화로 인한 직업별 인력수요 변화가 충분히 고려되도록 하였다. 전망의 결과에 따르면 향후 우리 경제는 지식기반경제(knowledge-based economy)로 이행하고 있다고 볼 수 있다. 우선 산업구조면에서 지식집약적산업으로의 구조조정이 일어나게 되고 이에 따라 산업별 취업구조에서도 고기술산업의 취업준비중이 급속히 증가하게 된다. 직업별 취업분포에 있어서도 전문기술직 행정관리직 등의 고숙련 사무직의 비중은 크게 증가하는 반면 생산관련직과 농림어업직의 비중은 감소하게 된다. 이처럼 경제가 지식집약화되어 감에 따라 고학력자에 대한 수요는 지속적으로 증가하지만 현재 적절한 인력양성과 공급이 이루어지지 않고 있어 향후 기술이나 기능에 따른 수급부일정(需給不一政)(skill mismatch)현상이 매우 심해질 것으로 보인다. 따라서 앞으로의 인력정책에서 가장 주안점을 두어야 할 부분은 첨단기술산업과 관련된 인력의 양성에 있다고 하겠다.2시간까지 LPDG용액은 MEC용액보다 비교적 나은 회복을 보였고 재관류 3일과 7일의 폐기능 평가에서 두 용액 모두에서 폐기능의 점차적 소실을 보였으며 이는 병리조직검사에서 보듯이 폐혐에 의한 외적인 요소라고 생각되며 따라서 LPDG용액은 허혈재관류손상 방지 및 급성폐렴 등 염증을 잘 관리한다면 20시간 이상 LPDG용액의 안전한 폐보존의 가능성 을 얻을 수 있었다.ic 형태로 외래유전자가 발현되었지만 대조구에서 87.0% (26/30개) 배반포기가 $\beta$-Gal 활력을 보인 반면, G418 처리구에서는 모든 배반포기가 $\beta$-Gal 활력을 보였다 (P<0.05). 그러나 대조구 및 G418 처리구의 ICM