• Korean Journal of Optics and Photonics
• /
• v.28 no.4
• /
• pp.153-157
• /
• 2017

An infrared camera and laser common-path optical system is applied to DIRCM (directional infrared countermeasures), to increase boresighting accuracy and decrease weight. Thermal effects of a laser beam in a common-path optical system are analyzed and evaluated, to predict any degradation in image quality. A laser beam with high energy density is absorbed by and heats the optical components, and then the surface temperature of the optical components increases. The heated optical components of the common-path optical system decrease system transmittance, which can degrade image quality. For analysis, the assumed simulation condition is that the laser is incident for 10 seconds on the mirror (aluminum, silica glass, silicon) and lens (sapphire, zinc selenide, silicon, germanium) materials, and the surface temperature distribution of each material is calculated. The wavelength of the laser beam is $4{\mu}m$ and its output power is 3 W. According to the results of the calculations, the surface temperature of silica glass for the mirror material and sapphire for the lens material is higher than for other materials; the main reason for the temperature increase is the absorption coefficient and thermal conductivity of the material. Consequently, materials for the optical components with high thermal conductivity and low absorption coefficient can reduce the image-quality degradation due to laser-beam thermal effects in an infrared camera and laser common-path optical system.

• Clean Technology
• /
• v.19 no.4
• /
• pp.355-369
• /
• 2013

Economic feasibility is one of the most important factors in energy production from regenerative biomass. From the aspect, biogas from anaerobic digestion of wastewater sludge is regarded as the most economical because of its cheap substrate and additional income from the disposal of waste sludge. Sludge hydrolysis has been regarded as the rate limiting step of anaerobic digestion and many sludge pre-treatment technologies have been developed to accelerate anaerobic sludge digestion for enhanced biogas production. Various sludge pre-treatment technologies including biological, thermo hydrolysis, ultrasonic, and mechanical methods have been applied to full-scale systems. Sludge pre-treatment increased the efficiency of anaerobic digestion by enhancing hydrolysis, reducing residual soilds, and increasing biogas production. This paper introduces the characteristics of various sludge pre-treatment technologies and the energy balance and economic feasibility of each technology were compared to prepare a guideline for the selection of feasible pre-treatment technology. It was estimated that thermophilic digestion and thermal hydrolysis were most economical technology followed by Cell rupture$^{TM}$, OpenCEL$^{TM}$, MicroSludge$^{TM}$, and ultrasound. The cost for waste sludge disposal shares the biggest portion in the economic analysis, therefore, water content of the waste sludge was the most important factor to be controlled.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.43-61
• /
• 1995

The national land use plan that targets the whole national land and all kinds of urban plans that targets a city or a part of city must be performed continuously now and after that. Therefore, the importance of land use plan, that is included in those plans, is very big and crucial. This study scrutinizes the detail zoning land suitability analysis which bases on urban basis plan and the GSIS application plan about allocation, applied various basic theory which is arranged in that course to study area, and try to develop the land use suitability analysis system, a application system The programing language used in system development is the AML of ARC/INFO. On this study, the results divide into four parts. First, we develop the land use suitability analysis system and can simplify and automatize a complicated analysis course and this system will be more useful to the land use suitability analysis. Second, the analysis range is expanded, considering the circumstance environmental factor of planning area outside. So we can implement more comprehensive analysis. Third, we apply a precedency conception and a legal restrictive element that base on urban characteristics and urban space structure theory to this study, develop a computerized method about distributive method, and can allocate the detail zone in the various ways. Finally, the next studies that can clear the detail zone suitability criteria and the correlation of the relationship of materials are essential to improve the accuracy and confidence in this analysis.

• Journal of Gastric Cancer
• /
• v.5 no.3 s.19
• /
• pp.158-162
• /
• 2005

Purpose: In order to clarify the carcinogenesis mechanism from chronic atrophic gastritis toward gastric cancer, we measured the pepsinogen I and II and compared their ratio with several clinical findings. Materials and Methods: We measured the preoperative serum pepsinogen I and II by using a radio-immunoassay and compared their ratio with several clinical findings, such as tumor size, mucinous vs non-mucinous tumor, cell differentiation, tumor location, depth of invasion, lymph-node status, Lauren's classification, and peritumoral atrophy in 103 consecutive patients with gastric adenocarcinomas who had received resections at Bundang CHA Hospital during the period from July 2003 to February 2005. Results: There were significant differences in the serum pepsinogen I/II ratio between patients with mucinous vs non-mucinous tumors (n=4 vs 9 and mean pep I/II=1.29 vs. 2.99, p=0.0288), with tumor size more than and less than $10cm^2$ (n=55 vs. 48 and mean pep I/II=2.64 vs. 3.24, p=0.0491), and with or without peritumoral atrophy (n=94 vs. 9 and mean pep I/II=2.83 vs. 3.89, p=0.0466). In patients with peritomoral atrophy, the pepsinogen I/II ratio was also lower in larger tumors (n=48 vs. 46 and mean pep I/II=2.44 vs. 3.23, p=0.0083). Well-differentiated carcinomas showed significantly lower serum pep I/II ratios than signet-ring-ceil types. There was no correlation between serum pep I/II ratio and tumor location, depth of invasion, lymph-node status, or Lauren's classification Conclusion: We proved the existence of a correlation between serum pepsinogen level and musosal atrophy, but these results are not sufficient for clinical application of serum pepsinogen level as a screening tool for gastric cancer.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.6
• /
• pp.49-59
• /
• 2018

When a tracked vehicle travels off-road, shearing action and ground sinkage occur on the soil-track interface and severely affect tractive performance of the tracked vehicle. Especially, the ground sinkage, which is induced by vehicle's weight (hereinafter referred to as static sinkage) and longitudinal forces in the direction of travel producing slip (hereinafter referred to as slip sinkage), develops soil resistance, directly restricting the tractive performance of an off-road tracked vehicle. Thus, to assess the tractive performance of an off-road tracked vehicle, it is imperative to take both of static sinkage and slip sinkage into consideration. In this research, a series of model track experiments was conducted to investigate the slip sinkage which has not been clarified. Experiment results showed that the slip sinkage increased with increasing the slip ratio, but the increasing rate gradually decreased. Also, the slip sinkage was found to increase as relative density of soil decreased and imposed vertical load increased. From the experiment results, the normalized slip sinkage defined as slip sinkage to static sinkage calculated in the identical condition was investigated, and an empirical equation for the slip sinkage was developed in terms of slip ratio, which allows vehicle operators to predict the slip sinkage in a given soil and operating conditions.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.2
• /
• pp.31-46
• /
• 2008

The purpose of this study is to analyze the contents of elderly housing in the unit "Family Life & Housing" in Technology & Home Economics 9th grade textbooks. The results of this study are as follows: First, the contents, illustrations, pictures, floor-plans, graphs and tables in current unit "Family Life & Housing" varied widely among textbooks and some didn't even contain these informations. Illustrations and pictures which are suit to the content and which contain positive image of space and living should be chosen. Second, most of the contents about elderly housing were concentrated on the life cycle, three-generation housing and universal design, discussed in chapter 'utility of living space.' The unification of overlapped contents and description which don't have stereotype about elderly housing are needed. Not only the interior environment but also the exterior environment of the elders and life-support service for them should be included in the contents. Contents that reflect the change of future population composition and the ratio of three-generation household are required. The elderly housing floor plan needs to be diversified in quantity such as ones which reflect the Korean characteristics or ones which enable person an independent life.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.4
• /
• pp.625-634
• /
• 2014

Tactical networks is being operated in configuration that consisting of a variety of characteristics communication equipments and heterogeneous networks. In this configurations, end-to-end communication can be achieved using interworking gateway for converting the data format of the network and using encryption algorithm of the networks. The use of mechanism results in a problem that secure data cannot be transferred directly, reprocessing and processing delay of communication in heterogeneous tactical networks. That is, for encoding and decoding of data, the decryption of encrypted data and re-encryption processing must be required at the gateway between different networks. In this paper proposes to mechanism for end-to-end secure communication in heterogeneous tactical networks. Using the proposed method, end-to-end secure communication between heterogeneous tactical networks(PSTN-UHF networks) which removes the necessity of a gateway for converting data into data formats suitable for network to remove a transmission delay factor and enable real-time voice and data communication and achieve end-to-end security for heterogeneous tactical networks. we propose a novel mechanism for end-to-end secure communication over PSTN and UHF networks and evaluate against the performance of conventional mechanism. Our proposal is confirmed removal of security vulnerabilities, end-to-end secure communication in heterogeneous tactical networks.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.583-590
• /
• 2016

This paper presents a dynamic crack propagation algorithm with Rayleigh damping effect based on the MLS(Moving Least Squares) Difference Method. Dynamic equilibrium equation and constitutive equation are derived by considering Rayliegh damping and governing equations are discretized by the MLS derivative approximation; the proportional damping, which has not been properly treated in the conventional strong formulations, was implemented in both the equilibrium equation and constitutive equation. Dynamic equilibrium equation including time relevant terms is integrated by the Central Difference Method and the discrete equations are simplified by lagging the velocity one step behind. A geometrical feature of crack is modeled by imposing the traction-free condition onto the nodes placed at crack surfaces and the effect of movement and addition of the nodes at every time step due to crack growth is appropriately reflected on the construction of total system. The robustness of the proposed numerical algorithm was proved by simulating single and multiple crack growth problems and the effect of proportional damping on the dynamic crack propagation analysis was effectively demonstrated.

• Spatial Information Research
• /
• v.22 no.3
• /
• pp.71-77
• /
• 2014

There are numbers of unpredictable risk factors in the disaster scenes such as fire, explosion and fail to early life-saving or holding the flames which can lead to massive damage. In particular, fire-fighters who arrive on the scene within 5 minutes after dispatching, have a limitation to get aware to the situation of scene fully, because of immediate deploy to disaster scene with limited information. This situation may lead to disturbance that fire-fighters perform effective fire-fighting activities, to put fire-fighter's life at risk by misjudge the situation. Previous domestic and International studies focused vulnerability for spatial area or features which can damage to life and property in the event of anticipated. In this study, we have been developed fire-fighting vulnerable zone model that can analyze comprehensively hindrance factors for fire-fighting activities targeting whole life cycle of fire-fighting activities from dispatch to fire suppression or life-saving. In addition, we have been given shape to finality and applicability for our model by defining the new concept of fire-fighting vulnerable zone which can be distinguished from the concept of fire vulnerable area in previous studies. The results of this study can be used to analysis fire-fighting vulnerable zone type analysis, establish fire-fighting policies and improve the performance of decision-making process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1123-1129
• /
• 2015

A pair of two-way valves typically is used in automotive washing machines, where the water flow direction is frequently reversed and highly pressurized clean water is sprayed to remove the oil and dirt remaining on machined engine and transmission blocks. Although this valve system has been widely used because of its competitive price, its application is sometimes restricted by surging effects, such as pressure ripples occurring in rapid changes in water flow caused by inaccurate valve control. As an alternative, one three-way reversing valve can replace the valve system because it provides rapid and accurate changes to the water flow direction without any precise control device. However, a cavitation effect occurs because of the complicated bottom plug shape of the valve. In this study, the cavitation index and percent of cavitation (POC) were introduced to numerically evaluate fluid flows via computational fluid dynamics (CFD) analysis. To reduce the cavitation effect generated by the bottom plug, the optimal shape design was carried out through a parametric study, in which a simple computer-aided engineering (CAE) model was applied to avoid time-consuming CFD analysis and difficulties in achieving convergence. The optimal shape design process using full factorial design of experiments (DOEs) and an artificial neural network meta-model yielded the optimal waist and tail length of the bottom plug with a POC value of less than 30%, which meets the requirement of no cavitation occurrence. The optimal waist length, tail length and POC value were found to 6.42 mm, 6.96 mm and 27%, respectively.