• Journal of the Korean Magnetics Society
• /
• v.12 no.3
• /
• pp.109-116
• /
• 2002

We designed the flyback planar transformer, which had 8 W capacity, with 70 V input voltage and 8.2 V output voltage for the establishment of design method and the confirmation of application possibility. The numerical value of inductance measured under the switching frequency of 120 kHz was 1650 $\mu$H, which was the inductance efficiency of'85∼87% against theoretical value. The A.C. resistance of primary and secondary coil was 4.2 Ω and 0.25 Ω respectively, On the other hand, the quality factor for each wound numbers showed quite a high value of 158 and 75 respectively. And the Coupling Factor was 0.96∼0.97 under 120 kHz switching frequency. The inductance rapidly increased as the thickness of the core plane increased until it became 1.4 mm but under the thickness more than 1.4 mm, there was no substantial change. Therefore, the critical value of the plane thickness of core was 1.4 mm. And the shape of the output wave of the planar transformer at 70V input voltage was a stable square wave.

• Journal of the Korean Society of Radiology
• /
• v.14 no.6
• /
• pp.791-800
• /
• 2020

Ultrasonography is widely used to evaluate the function of fetal heart, but due to the subjective nature of the test, there are differences in measurement methods for each examiner, and especially the myocardial performance index has no reference index to date. Therefore, in this study, we wanted to analyze pulse Doppler waveforms of normal fetuses and develop an automatic measurement program to make objective measurements. One hundred and thirty-three pregnant women who visited the hospital for prenatal examinations were studied, myocardial performance index was measured after acquiring a pulse doppler image of the left ventricle. As a result, the early, mid and late pregnancy myocardial performance index, measured by the automatic measurement program conducted in this study, was found to increase as pregnancy continued.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.9
• /
• pp.698-706
• /
• 2017

The risk of high power electromagnetic(HPEM) pulse exposure to the devices used in digital control system such as PLC(programmable logic controller) and communication cable is increasing. In this paper, two different frequency ranges HPEMs were exposed to those control systems to assess the each vulnerability. The vulnerability of the EUTs exposed from HPEM were analyzed and compared with a variation of distances and source power. As the EUTs were exposed to higher level of HPEM, the voltage and communication waveform of the control system had shown a distorted response. And the unshielded twisted pair(UTP) cable connected to the EUTs showed operation failures with induced voltage. However, the foiled twisted pair(FTP) cable shielded the connected device efficiently from the HPEM exposure. Therefore, the necessity of the protection measures against the vulnerability of HPEM exposure for the digital control system used in power facilities and industrial site were verified.

• Progress in Medical Physics
• /
• v.17 no.4
• /
• pp.260-267
• /
• 2006

A retinal ganglion cell's receptive field is defined as that region on the retinal surface In which a light stimulus will produce a response. A retinal ganglion cell peers out at a small patch of the visual scene through its receptive field and encodes local features with action potentials that pass through the optic nerve to higher centers. Therefore, defining the receptive field of a retinal ganglion cell is essential to understand the electrical characteristics of a ganglion cell. Distribution of receptive fields over retinal surface provides us an Insight how the retinal ganglion cell processes the visual scene. In this paper, we provide the details how to reconstruct the receptive field of a retinal ganglion cell. We recorded the ganglion cell's action potential with multielectrode array when the random checkerboard stimulus was applied. After classifying the retinal waveform Into ON-cell, OFF-cell, ON/OFF-cell, we reconstructed the receptive field of retinal ganglion cell with Matlab. Here, we show the receptive fields of ON-cell and OFF-cell.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1E
• /
• pp.82-88
• /
• 1994

It is important to exactly detect the GCI(Glottal Closure Instant) in the speech signal processing. A few methods to detect the GCI of voiced speech have een proposer, untill now. But these are difficult to detect the GCI for wide range of speakers and or various vowel signals. In this paper, we prposed a new method for GCI detection using the G-peak. The speech waveforms are passed through the LPF of variable bandwidth. Then, the GCI's of voiced speech are detected by the G-peak based on the filtered signals. We compared the detected with the eye-checked GCI at the SNR of clean, 20dB, and 0dB. We took into account the range within 1ms between eye-checked and detected GCI. We obtained the result of the detection rate as 97.9% in the clean speech, 96.5% in 20dB SNR, and 94.8% in 0dB SNR, respectively.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.420-428
• /
• 2018

In this paper, represented uninterruptible power supply (UPS) equipment maintaining constant output voltage, the proposes a photovoltaic system constructed with a step up boosting chopper and single phase pulse width modulation (PWM) voltage source inverter. as power source disconnection, voltage variation and output current variation with load variation. This system is driven by being synchronized voltage fed inverter and AC source, and in the steady state of power source charge battery connected to DC side with solar cell using a Photovoltaic that it was so called constant voltage charge. It can be results of saving electric power, and through a normal operation of energy storage system (ESS), the system operated the LED a calling on signal changes at the airport in an efficient manner. In addition, better output waveform was generated because of PWM method, and it was proved to test by experiment maintained constant output voltage regardless of AC source disconnection, load variation, and voltage variation of AC power source.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.173-179
• /
• 2001

This paper represents the control algorithm of the instantaneous voltage sag corrector for the power quality enhancement in distribution line. Especially, a novel detection technique of the symmetrical components is proposed for the analysis of the three-phase unbalanced and asymmetrical problems caused by the single line ground fault which is he most frequent event. This proposed method is based on the simple calculation and the control references of the symmetrical components for voltage compensation can be described as dc value without any other phase detection procedure. And also, for the generation of the reference voltages, the UF and MF defined by IEC is considered. Using this proposed control algorithm, the compensator has the fast dynamic characteristics and the THD of the compensated voltage waveform is very low. Finally, the validity of the proposed algorithm is proved by the PSCAD/EMTDC simulation and experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.527-536
• /
• 2004

A novel hybrid multiple access system, TD-BCDMA, where Binary CDMA that maintains a constant amplitude by clipping the summation of input signals multiplied by the orthogonal codes is transmitted over a TDMA frame structure, was Nosed. In every time slot of TDMA, binary CDMA modulated multiple channel signals are transmitted with the same waveform of TDMA. TD-BCDMA has all the advantages of TDMA. Flexible adjustment of the data transmission rate In demand is possible by adjusting the number of codes and time slots assigned to each user. This property was used to show an example of Ad Hoc network applications. To obtain a proper synchronization scheme for TD-BCDMA, the Receiver Operating Characteristics performance and the false alarm probability and false dismissal probability under various channel environment of two different schemes, a preamble scheme as in TDMA and a synchronization channel scheme as in CDMA were compared. It was proved that the preamble scheme is more practical and suitable than the synchronization channel scheme for the hybrid multiple access system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.2
• /
• pp.138-142
• /
• 2013

As an early warning system to reduce the damage of aquacultured mollusks due to low salinity water, we investigated the possibility of a biomonitoring system measuring the shell valve movement (SVM) of Pacific oyster (Crassostrea gigas) by using the Hall element sensor. In high salinity water of 27 psu, SVMs of Pacific oyster showed spikes which mean a relatively fast closing condition after opened condition of average 10-15 mm, and then the SVM showed back to opening condition slower than closing speed. In water salinity of 20-27 psu, the SVMs were similar to that of 27 psu. However, below 17 psu, it showed abnormal valve movements such as spending more time for shell closure. In 10 psu, we could not detected SVMs due to closed condition during experiment periods. Thus, if we quickly detect abnormal environmental variations like low salinity using bio-monitoring of SVM, it may be contribute to increased productivity by dramatically reducing damages in aquaculture.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.9-19
• /
• 1989

The impact stress and wave propagation of graphite/epoxy and glass/epoxy laminates subjected to the transverse low-velocity impact of steel balls are investigated theoretically. A plate finite element model based on Whitney and Pagano's theory for the analysis of heterogeneous and anisotropic plates taking into account of the transverse shear deformation is used for the theoretical investigation. This model is in conjuction with static contact laws. The basic element is a four-node quadrilateral with the five degrees-of-freedom per node. The reduced integration technique is used for shear locking associated with low-order function in application to thin plates. These two materials are composed of [0.deg./45.deg./0.deg./-45.deg./0.deg.]$_{2S}$ and [90.deg./45.deg./90.deg./-45.deg./90.deg.]$_{2S}$ stacking sequences and have clamped-clamped boundary conditions. Finally, the present results are compared with an existing solution and wave propagation theory and then impact stress and wave propagation phenomena are investigated.gated.