• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1290-1291
• /
• 2011

본 연구에서는 배선용차단기의 트립부 동작 신뢰성 향상과 트립부의 구조 최적화를 위하여 트립부 동작 특성을 정량적으로 예측할 수 있는 자계-동역학 연성해석기술을 연구하였다. 먼저 전류와 트립부 가동자 변위에 따라 가동자에 유기되는 전자기력을 예측할 수 있는 수식을 도출하였으며, 전자기력 수식과 가동자의 회전운동방정식을 시간에 따라 과도해석하여 가동자의 변위와 동작전류, 트립하중을 정량적으로 예측할 수 있는 트립부 동특성 해석기술을 개발하였다. 그리고 개발된 해석기술을 검증하기 위하여 양산 배선용차단기를 이용하여 트립실험을 실시하였으며 동작전류의 실험값과 해석값이 비교적 일치함을 확인하였다. 또한 본 연구에서는 개발된 해석기술의 활용성을 제고하기 위하여 윈도우즈 환경의 트립부 동특성 해석 프로그램을 개발하였으며, 이를 활용하여 트립부 설계변수별 동작 특성을 분석하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.164-171
• /
• 2003

The side impact behavior has been investigated when the high strength steel 60TRIP(Transformation Induced Plasticity) is replaced for the conventional low-carbon steel for weight reduction of an auto-body. The side impact analysis was carried out as specified in US-SINCAP with the center pillar and the side sill of the conventional steel or 60TRIP. For accurate impact analyses, the dynamic material properties are adopted with the Johnson-Cook model. The analysis results demonstrate that the penetration of the side members is remarkably reduced when 60TRIP is employed for the center pillar and the side sill replacing the conventional steel. The crashworthiness in the side impact is considerably improved with less penetration of the side members and less acceleration of the opposite floor.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.83-86
• /
• 2000

가변 필터는 송수신기에서 회로를 간단히 하여 특히 멀티채널을 사용하는 송수신기에서 중추적 역할을 담당하게 된다. 본 논문에서는 소형경량이고, 구조가 단순하여 제작이 간단하며, MMIC화하기 쉬운 실용적인 가변필터를 설계 및 제작하여 그 사용가능성을 제안하였다. 본 논문에서는 중심주파수 1.95GHz, 통과대역이 100MHz인 대역통과 링 필터를 Split 모드 방식으로 구현하고 이를 바탕으로 300MHz의 가변대역폭을 갖는 필터를 제작하였다. 이 필터의 대역폭을 가변하기 위하여 바이어스전압에 따라 커패시턴스가 변화하는 Varactor 다이오드를 사용하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.134-136
• /
• 1998

When a MCCB Instant trip spring which is adjusted to notrip at -20% of each current from $5{\times}In$ to $10{\times}In$ and trip +20% of those is designed, we should know attraction force between Fixed Magnet and Armature. So we first made some samples, do experiments of weight, and simulated the modelling by 3D Maxwell S/W. With values of experiment and simulated values, we do design instant trip springs and repeat the above process. Finally we set up the Process of designing Instant spring. With it, we can save time and R&D cost.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.354-356
• /
• 1999

Through the Standard of MCCB, the Adjustable Type Instant Trip Unit should NO trip at -20% of each current from $5{\times}In$ to $10{\times}In$ and trip +20% of those. In this paper, we obtain the attraction force between Fixing Magnet and Moving Armature. So we first made some samples. do experiments of weight, and simulated the modelling by 3D Maxwell S/W. With values of experiment and simulated values, we do design instant trip springs by using the ADAMS S/W of kinematic simulation. Finally we product the 250A Adjustable Instant Trip Unit, and it is very useful to our customers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.147-152
• /
• 2002

Effect of lip shape on the hole flangeability of high strength steel sheets is investigated. Circular plates of various hole sizes are tested and the variation of lip length as well as the variation of thickness on the sectional views of the finished lip were studied. The conventional hole flanging process is limited to a certain limit hole diameter below which failure will ensue during the hole expansion. The intention of this work is to examine the effect of lip shape on the flangeability of TRIP steel and Ferrite-Bainite duplex steel and find out major parameters which can affect flanging shape of high strength hot rolled steels. Over the ranges of conditions investigated, the minimum hole diameter of F+B steel is better than TRIP steel. while, the lip-shape accuracy of TRIP steel is better than that of F+B steel. although the tensile strength and elongation of %P steel are superior than those of Ferrite-Bainite duplex steel, the flangeability is found to be not so strongly sensitive to the tensile properties but sensitive to displacement on the circumferential direction of hole edge.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.519-526
• /
• 2002

In this paper, a microstrip patch array antenna for a Doppler radar at 10.525GHz is desinged and fabricated. To be used for mobile radar system, the antenna is fabricated on a single layer laminate to resist a fire impact and is covered with the Teflon foam. To obtain the desired characteristics, the array antenna is designed 4$\times$8 array using a corporate 3-dB amplitude taper. Also, using square patch elements, the antenna can be converted to a circular polarized antenna later. The designed and fabricated array antenna has the reflection coefficient$({S_11})$ -53.498dB, the horizontal beam width of $10^{\circ}$, the vertical beam width of $18.8^{\circ}$, the gain of 21dBi, the bandwidth of 220MHz for VSWR<1.5 and a side lobe level of less than -17.5dB.

• Microbiology and Biotechnology Letters
• /
• v.37 no.3
• /
• pp.197-203
• /
• 2009

An indole oxygenase originated from Rhodococcus sp. RHA1 was cloned into the expression vector, pTrc99A, in Escherichia coli, and designated pTCAN1. The pTCAN2 was constructed from pTCAN1 by the deletion of $lacI^q$ for the constitutive expression of indole oxygenase without adding IPTG in the medium. The complete open reading frame of indole oxygenase was 1,224 bp long, which encodes a protein of 407amino acids. Crude extracts of E. coli $DH5{\alpha}$/pTCAN1 and pTCAN2, respectively, were prepared and subjected to SDS-PAGE analysis. A band corresponding to molecular mass of about 43 kDa was appeared and this result correlated with the predicted molecular mass of cloned indole oxygenase. The E. coli harboring pTCAN1 and pTCAN2, respectively, showed blue color colony in LB plate. The pigment showing blue color was prepared from E. coli $DH5{\alpha}$/pTCAN2, and identified as indigo by experiments using spectrophotometer, HPLC, and TLC. The indigo-forming activity of indole oxygenases from the whole cell of E. coli $DH5{\alpha}/pTCAN1$ cultured at LB medium added 1mM of IPTG and that of E. coli/pTCAN2 showed about 1.75nmol/min/mg DCW (dry cell weight) and 3.85 nmol/min/mg DCW, respectively. Also, the E. coli $DH5{\alpha}$/pTCAN2 produced about $236{\mu}M$ of indigo after 48 hours incubation in TB medium supplemented with 2.5 mM of tryptophan.