• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.383-386
• /
• 2001

본 논문에서는 전력과 대역특이 제한된 환경에서 효율적인 트렐리스 부호화 변조방식을 적용한 QAM 모뎀을 구현하였다. 입력되는 데이터를 트렐리스 부호화 변조한 후 I, Q로 분리된 신호는 신호 사상기를 통하여 해당하는 성 상점으로 변환된다. 복조기는 I, Q의 신호를 트렐리스 복호기에 입력하여 데이터를 복구한다. 변복조기의 구현은 Xilinx사의 FPGA 디자인툴인 Foundation을 사용하여 VHDL simulation과 Chip Targeting을 수행하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.1925-1934
• /
• 1994

In this paper, it was studied the method of performance improvement of trellis encoded 4-ray continuous phase FSK with nonconstant frequency space when permitted complexity. It was used the nonconstant mapper in order to produce nonconstant frequency, fixed maximum symbol values 3, -3 for comparision in similar bandwidth, changed symbol values 1, -1 from 0.5 to 3.0 as symmetry. Free Euclidean distance evaluation of all encoder/nonconstant mapper combinations, which is the parameter of performance of error probability, was performed with the trellis-based algorithm, we analyzed the characteristics of those.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.2
• /
• pp.105-114
• /
• 2000

In this paper, we propose a bandwidth-efficient channel coding scheme using the turbo trellis-coded modulation with multiple symbol detection. The turbo code can achieve good bit error rates (BER) at low SNR. That comprises two binary component codes and an interleaver. TCM codes combine modulation and coding by optimizing the euclidean distance between codewords. This can be decoded with the Viterbi or the symbol-by- symbol MAP algorithm. But we present the MAP algorithm with branch metrics of the Euclidean distance of the first phase difference as well as the Lth phase difference. The study shows that the turbo trellis-coded modulation with multiple symbol detection can improve the BER performance at the same SNR.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.535-543
• /
• 2002

In this paper, we propose $\pi$/8 shift 8PSK and trellis-coded $\pi$/8 shift 8PSK-OFDM techniques by applying $\pi$/4 shift QPSK to trellis-coded modulation (TCM), and performing signal set expansion and set partition correspondingly based on phase difference. In our Viterbi decoding algorithm, up to L phase differences from successively received symbols are employed in the new branch metrics. Such sliding multiple symbol detection (SMSD) method provides improved bit-error-rate (BER) performance in the differential detection of the trellis-coded $\pi$/8 shift 8PSK-OFDM signals. The performance improvements are achieved for different communication channels without sacrificing bandwidth and power efficiency. It thus makes the proposed modulation and sliding detection scheme more attractive for power and band-limited systems.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.397-409
• /
• 2003

This paper describes an implementation of radix-4 trellis parallel architecture and backward state transition control trace back Viterbi decoder, and presents the application results to high speed wireless LAN. The radix-4 parallelized architecture Vietrbi decoder can not only improve the throughput with simple structure, but also have small processing delay time and overhead circuit compared to M-step trellis architecture one. Based on these features, this paper addresses a novel Viterbi decoder which is composed of branch metric computation, architecture of ACS and trace back decoding by sequential control of backward state transition for the implementation of radix-4 trellis parallelized structure. With the proposed architecture, the decoding of variable code rate due to puncturing the base code can easily be implemented by the unified Viterbi decoder. Moreover, any additional circuit and/or peripheral control logic are not required in the proposed decoder architecture. The trace back decoding scheme with backward state transition control can carry out the sequential decoding according to ACS cycle clock without additional circuit for survivor memory control. In order to evaluate the usefulness, the proposed method is applied to channel CODEC of the IEEE 802.11a high speed wireless LAN, and HDL coding simulation results are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7B
• /
• pp.1301-1312
• /
• 2000

본 논문에서는 트렐리스 복호 방식을 이용한 블록 터보 부호의 이로적인 성능 바운드와 함께 내부 구성 부호의 변형 및 내부 구성 부호의 연결 방법에 따른 성능의 변화를 살펴본다. 또한 효율적인 복잡도 감소 기법을 적용한 반복 복호 기법을 소개하고 시뮬레이션을 통하여 성능을 분석한 결과를 제시한다. 가우시안 채널에서의 시뮬레이션 결과에 따르면 본 논문에서 제시한 기법은 약 1/10정도의 복잡도를 가지고서도 전체 트렐리스를 탐색한 기법에 거의 근접하는 성능을 얻을 수 있음이 보여졌다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.517-526
• /
• 2000

In this paper, we propose the trellis coded spread spectrum communication system with one channel signal selection of the subset by the PN code. This paper proposes the Viterbi decoder that have the squared Euclidean distance of the order phase difference as well as 1st order phase difference as the branch metrics by using the multiple symbol detection method. TCM method was developed to overcome limited power and bandwidth efficiently in digital communication. we multiply one of convolution code's output data to PN code for applying TCM to the spread spectrum. We investigated the performance of the direct sequence/spread spectrum communication system with trellis coded modulation. In this system, we could improved the coding gain in the spread spectrum.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.234-240
• /
• 2007

In this paper, low complexity block constrained trellis coded quantization (BC-TCQ) structures are introduced, and a predictive BC TCQ encoding method is developed for quantization of line spectrum frequencies (LSF) parameters for narrowband speech coding applications. Trellis-coded quantization(TCQ) is a form of VQ that builds the VQ codebook from interleaved constituent scalar quantization codebooks. The performance is compared to the other VQ, demonstrating reduction in spectral distortion and significant reduction in encoding complexity. The predictive BC-TCQ is about 0.47107 dB superior to the IS-641 split-VQ, 26bits/frame, in spectral distortion sense. The BC-TCQ is 64.54%, 76.93%, 2.35% of the IS-641 split-VQ, respectively, in the complexity of the additions, multiplies, comparisons.

• Composites Research
• /
• v.23 no.5
• /
• pp.8-14
• /
• 2010

Three types of glass woven fabrics (plain, balanced twill, and unbalanced twill) having various sample sizes and aspect ratios were tested using the bias-extension tests. Real-time deformation images, force, and displacement data were collected. For the bias-extension test, the shear angle of the fabrics from the equation based on the crosshead displacement and fabric size was compared with direct manual measurements of the warp and weft angles as well as the optical measurement software. To determine the shear force, an analytical equation was introduced considering the kinematics of the bias-extension test. The obtained shear behaviors were further compared with the results by the trellis-frame test. The optical measurement methods showed that the mathematical method was reasonable before the shear angle of the fabrics reaches $30^{\circ}$ in the bias-extension tests. Also, the bias-extension test gave consistent behaviors with the trellis-frame test only for isotropic and homogeneous fabrics such as balanced plain and twill weaves.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.519-527
• /
• 2000

This paper suggests and analyzes the Serially Concatenated Space-Time Code(SCSTC) with the possibility of a efficient high-speed transmission in a band limited channel. The suggested code has a structure that uses the interleaver to connect the space-time code as an inner code and the convolutional code as a outer code serially. This code keeps the advantage of high-speed transmission and also has the high BER performance. The performance of the suggested system is compared with the conventional bandwidth efficient trellis coded modulation, such as a Serially Concatenated Trellis Coded Modulation (SCTCM) and a Turbo-Trellis Coded Modulation(Turbo-TCM). The results show that the suggested system has a 2.8dB and 3dB better BER performance than SCTCM and Turbo-TCM respectively in case of the transmission rate 2b/s/Hz in fading channel.