• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.90-95
• /
• 2016

본 연구에서는 교육 및 연구를 위한 CFD 해석 프로그램인 EDISON_CFD 프로그램을 이용하여 화물 트럭의 후면부 형상변화에 따른 공력특성을 분석해보았다. 먼저 추가적인 부착물을 장착하지 않은 기본적인 형상의 화물트럭의 공력특성을 확인 후, 후면부에 여러 형상의 Boat tail(보트 테일)과 전면부에 Cap-roof fairing(캡루프 페어링)이 부착된 형상을 해석하여 트럭이 받는 항력 감소를 통해 최적형상을 찾아가는 연구를 수행하였다. Cap-roof fairing이 부착된 형상에서 $15^{\circ}$의 특성길이가 0.3인 Boat tail에서 가장 좋은 항력 감소 효과를 얻을 수 있었다. Cap-roof fairing의 경우 6%의 항력 계수 감소를 보였고, Boat tail에서 20%의 항력 계수 감소효과를 관찰할 수 있었다. Boat tail의 각도와 길이를 변수로 하여 여러 해석을 진행한 결과 최적화된 형상을 선정할 수 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.90-98
• /
• 2001

In this paper, the development of exclusive control valve for improving the performance of truck cab tilting system is discussed. Cab tilting system is implemented to the heavy truck for the convenience of driver. However when tilting up or down, sudden swing of cab has brought discredit on user. To improve this phenomena it is inevitable to use counter balance valve. But because of high pressure and low flow characteristic, general counter balance valve is unsuitable to cab tilting system. Therefore, this paper presents the developments of exclusive return pressure control valve which prevents sudden swing of cab and verify the validity of design through the computer simulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.77-82
• /
• 1999

대형 화물트럭의 차실 내에 높은 수준의 차바닥 진동을 수반한 높은 소음이 발생하였다. 측정 및 분석결과 문제의 진동 소음은 추진축의 회전 1차 및 2차 성분으로 나타났다. 진동 전달경로상의 구성계 및 구성요소들에 대해 모드해석과 실차 주행 모드 해석시험을 실시한 결과 드라이브라인 및 프레임의 공진주파수가 문제가 되는 소음진동 주파수와 거의 일치하였으며, 또한 캡의 실내음향 공진 모드가 문제되는 주파수에서 존재하였다. 실험결과에 따라 액슬과 액슬간의 축의 장착각도를 변경하여 가진력을 줄이고, 비틀림 동흡진기를 추진축에 장착하여 드라이브라인계 공진을 제어함으로써 문제의 시내진동소음을 현저히 개선하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.871-876
• /
• 2005

Currently, the marketable truck has the cab tilting system which highly absorb the vibrations and impacts of cab. The cab tilting system is equipped with the hydraulic system for maintenance and inspection of truck. And it is very important to improve the user's feeling of driving and convenience. To have the better performance, it is important to confirm the dynamic characteristics of each parts of the system. In this study, a mathematical model of the system was derived and the parameters in the model were identified from experimental data. The results of the simulation were compared with those of experiments. These results of the computer simulation and experiments show that the proposed analysis can be applied effectively to design the system. Our results can be utilized for the future research to improve the capability of the truck cab tilting system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.4
• /
• pp.496-503
• /
• 1999

In this paper, the improvement of cap tilting system in heavy truck and the development of program for automatic design are discussed. Cab tilting system takes some important roles in heavy truck, absorbing discomfort vibration from load, increasing repair efficiency and making sure of safety. Common manual cab tilting system cannot be easily tilt up in sloped road, giving difficulty to driver as cal tilting up/down. So recently hydraulic cab tilting system is in wide use. But some problem such as tilting up/down speed is not constant and sudden swing of cab has brought discredit from user. Therefore, this paper presents advanced cab tilting system which prevents sudden swing of cab and development of program for selecting design parameters automatically.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.42-49
• /
• 2004

When a truck cab is conveyed at a constant speed by a hanger and immersed into the painting reservoir, it may fall off from the hanger by buoyancy. In order to reduce the buoyancy, on the bottom of a cab panel are holes placed, which allow paint to flow into the inside of a cab. In this study, a differential equation is derived which can be solved numerically by using 4th-Order Runge-Kutta method to calculate transient behavior of the buoyant force with sizes and locations of the holes given. The solution is utilized to optimally determine sizes and locations of the holes.

• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.40-45
• /
• 2019

This paper is a purpose to study the failure example for heavy-duty vehicle fire. The first example, the researcher found the engine over-heating phenomenon causing a coolant leakage by the sealing poor of head-gasket because of D-ring part deformation contacting with cylinder liner top-part and cylinder head. He certified a fire breakout by short transferred to surrounding wiring of air-cleaner. The second example, a brake lining by return fault of break operating S cam causing with much wear of a rear 4 wheel brake lining repeatably was worn by friction. In the long run, it became the cause of fire. The third example, the researcher knew the fire cause was came about the short of wire by overload of tilting motor when the driver tilted up the cap to inspect a engine. Therefore, a heavy-duty fire must minimize the fire occurrence by thorough controlling.