• Title/Summary/Keyword: 트럭

Search Result 580, Processing Time 0.023 seconds

FOCUS

  • 한국레미콘공업협회
    • 레미콘
    • /
    • no.10 s.57
    • /
    • pp.91-100
    • /
    • 1998
  • PDF

Evaluation of Impact Factor in Composite Cable-Stayed Bridges under Reliability-based Live Load Model (신뢰도 기반 활하중모델에 의한 강합성 사장교의 충격계수 평가)

  • Park, Jae Bong;Park, Yong Myung;Kim, Dong Hyun;Lee, Jong Han
    • Journal of Korean Society of Steel Construction
    • /
    • v.25 no.4
    • /
    • pp.335-346
    • /
    • 2013
  • AASHTO LRFD and Korean Bridge Design Code (Limit State Design) specify to consider Truck and Lane load simultaneously determined from reliability-based live load model, and impact shall be applied to the truck load while it shall not be applied to the lane load. In this paper, vehicle-bridge interaction analysis under moving truck and lane loads were performed to estimate impact factor of the cables and girders for the selected multi-cable-stayed composite bridges with 230m, 400m and 540m main span. A 6-d.o.f. vehicle was used for truck load and a series of single-axle vehicles was applied to simulate equivalent lane load. The effect of damping ratio on the impact factor was estimated and then the essential parameters to impact factor, i.e., road surface roughness and vehicle speed were considered. The road surface roughness was randomly generated based on ISO 8608 and it was applied to the truck load only in the vehicle-bridge interaction analysis. The impact factors evaluated from dynamic interaction analysis were also compared with those by the influence line method that is currently used in design practice to estimate impact factor in cable-stayed bridge.

A Fundamental Study on Vibration Characteristics of Container Car for Sensitive Cargo Transportation according to ASTM D-4169 (ASTM 규격에 따른 민감화물 수송용 컨테이너 화차의 진동 특성에 관한 기초 연구)

  • Ki, Ho-Cheol;Lee, Seung-Yil;Kim, Chul-Su
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.12
    • /
    • pp.53-59
    • /
    • 2019
  • To reduce the vibrations and shocks during the cargo transportation of high value-added goods, the vibration history was measured on the truck transportation section (Asan-Uiwang) and the freight train transportation section (Uiwang-Pusan). The internal vibrations of the container were obtained by attaching acceleration sensors in three axis directions (longitudinal, lateral. and vertical directions) on the front and rear bogies. The rail vibration profile (0.29Grms) proposed in ASTM D-4169 was approximately 50% higher than the truck vibration profile (0.54Grms). The overall vibration was 16% and 33 % lower in the longitudinal and transverse directions, respectively, compared to the ASTM truck transport vibration profile. On the other hand, the vertical vibration measurement history partially exceeded the ASTM truck transport vibration profile over the range, 4 - 15Hz, and over 60Hz. The vibration measurement history of the cargo train was similar to that of the road. The longitudinal and lateral vibration history was lower than the ASTM D-4169 rail vibration profile, while the vertical history was over 30Hz.

Necessity of Climbing Lane on SMART Highway and its Design Guidelines (SMART Highway 오르막차로 설치 필요성 및 기준 연구)

  • Kim, Sang Gu;Kim, Young Chun;Sim, Dae Young;Lee, Yong Mun;Kim, Jong Won;Kim, Heung Rae
    • Journal of Korean Society of Transportation
    • /
    • v.32 no.5
    • /
    • pp.473-486
    • /
    • 2014
  • This study aims to review whether climbing lane installment is needed by analyzing the impact that standard trucks have on traffic according to vertical alignment at SMART highway, and if climbing lanes are required to propose truck speed change curves based on slope length. We used VISSIM simulation model to obtain the speed change of the standard truck on uphill roads. The standard truck on climbing lanes was set for 100kg/kW (170lb/hp) with the entry speeds set and analyzed by 90, 100, and 110 km/h considering the future speed limit of trucks. The results of the research show that under SMART highway circumstance, the 1 and 2% vertical alignment is not needed at the climbing lane but 3% vertical alignment is necessary. In order to install the climbing lane at 3% vertical alignment, the speed change curve of truck depending on slope length of 90, 100, and 110km/h of entry speed is proposed.

고속도로상에서의 타이어 점검(83년도 상반기)

  • Song, Yeong-Gi
    • The tire
    • /
    • s.107
    • /
    • pp.41-44
    • /
    • 1983
  • 당협회에서는 금년도 상반기에도 교통부, 치안본부, 한국도로공사의 후원으로 2차에 걸쳐 고속도로상의 휴게소에서 무료로 타이어 점검 및 서비스를 실시하였다. 금년도 상반기 점검결과도 작년도와 마찬가지로 타이어 정비불량율이 무려 46%에 달하였으며, 차종별로는 트럭이 58%로서 가장 불량하였다. 정비불량항목으로는 과마모가 제일 많아 42%나 되었으며, 특히 트럭에 많았다. 관광버스에는 재생타이어를 끼고 고속도로를 운행하고 있는 것이 39%나 되었으며, 또한 겨울철 눈올 때에만 사용토록 되어 있는 Snow타이어를 봄, 여름까지 계속 사용하고 있는 차량이 7%나 되어 발열에 의한 사고의 위험성이 많았다.

  • PDF

81년도 미국의 타이어 시장

  • Korea Tire Manufacturers Association
    • The tire
    • /
    • s.100
    • /
    • pp.25-32
    • /
    • 1982
  • 본고는 미국의 타이어 전문지인 "Modern Tire Dealer"에서 조사한 '81년도 미국의 타이어산업 및 타이어 시장 전반에 관한 실적분석이다. 즉, 승용차 및 트럭의 신차용 타이어 시장과 교환용 타이어시장의 브랜드 점유율, 출하량, 생산능력, 재생타이어시장 및 전천후타이어의 성장률 등을 조사 분석한 것이다. '81년도 미국타이어 업계의 실적은 80년도의 최저기록을 크게 벗어나지 못한 체, 총출하량으로는 약2,0% 증가에 불과하였다. 이중에서 신차용 타이어는 80년도 수집을 겨우 유지하고 있는 상태인데, 특히 트럭 ㆍ버스용 타이어에서는 오히려 80년도 실적을 하회하고 있는 실절이다. 한편 교환용타이어는 전년 비 약 2.9% 증가하였다.

  • PDF

고속도로상에서의 타이어 점검

  • Song Yeong-Gi
    • The tire
    • /
    • s.103
    • /
    • pp.33-36
    • /
    • 1982
  • 당협회에서는 금년도에도 교통부, 치안본부, 한국도로공사의 후원으로 4차에 걸쳐 고속도로상의 휴게소에서 무료 타이어 점검 및 서비스를 실시하였다. 금년도의 점검결과도 작년도와 별차업이 타이어 정비불량이 무려 46%에 달하였으며, 차종별로는 트럭이 52%로서 가장 불량하였다. 정비불량항목으로는 과마모가 제일 많아 39%를 점유하고 있었다. 특히 관광버스에는 재생타이어를 끼고 고속도로를 운행하고 있는 것이 26%나 되었고 그 중에는 트레드고무가 벗겨져서 사고 직전의 것도 있었다. 또한 트럭에서는 겨울철 눈올 때에만 끼도록 되어 있는 스노타이어를 봄, 여름, 가을까지 계속 사용하고 있는 차량이 9%나 되어 타이어 사고의 위험이 많았다.

  • PDF