• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.484-487
• /
• 2009

초고층구조물의 경우 중저층 구조물과 다르게 설계시 중력하중과 풍하중의 크기가 매우 크므로 이를 제어하는 구조물의 코어에 강성이 큰 전단벽을 설치하고 최상층에 아웃리거나 벨트트러스를 설치하는 방법을 많이 적용한다. 그리고 홍콩의 IFC와 같이 초대형기둥과 아웃리거를 설치하여 횡하중에 저항하는 구조시스템도 제시되고 있다. 이러한 초고층구조물에서 연쇄붕괴가 발생할 경우 세계무역센터의 붕괴에서 나타나듯이 상상을 초월하는 피해를 초래할 수 있다. 따라서 본 연구에서는 이러한 초고층 구조시스템의 연쇄붕괴저항능력을 Pushdown해석을 이용하여 평가하였다.

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.29-36
• /
• 1992

우리의 경제발전과 함께, 막구조 및 케이블구조를 이용한 특수 대공간 구조물이 더욱 더 늘어날 전망이며, 이들 구조물의 구조해석은 일반적인 범용ㅇ 구조해석 프로그램으로는 해석이 불가능하다. 즉, 대부분의 범용 구조해석 프로그램이 초기강성을 가진 구조물을 해석할 수 있는데 반해, 막구조 및 케이블 구조는 초기강성이 매우 약한 구조체이므로, 초기 불안정현상을 나타내고, 따라서 해석이 불가능하게 된다. 이러한 구조적 특징을 가진 막구조 및 케이블구조를 해석하기 위하여, 막 케이블 및 트러스요소로 구성된 복합구조체를 해석할 수 있는 범용 구조해석 프로그램인 McS(Membrane and Cable/Truss Structures)가 개발되었으며, 그 Flow-chart는 표1에서와 같다. McS는 현재, 한국에서는 성균관대학교 자연과학캠퍼스의 VAX-11, 1명진단조공업주식회사의 SUN 워크스테이션에서 작동중이며, 일본에서는 동경대학 생산기술연구소의 M-380 및 T.I.S. & Partners의 IBM 워크스테이션에서 작동중에 있다.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.107-112
• /
• 2008

This paper investigates the variation of post-buckling behaviours of 2-dimensional shallow arch type truss after sizing optimization. The mathematical programming technique is used to produce the optimum member size of 2D arch truss against a central point load. Total weight of structure is considered as the objective function to be minimized and the displacement occurred at loading point and member stresses of truss are used as the constraint functions. The finite difference method is used to calculate the design sensitivity of objective function with respect to design variables. The postbuckling analysis carried out by using the geometrically nonlinear finite element analysis code ISADO-GN. It is found to be that there is a huge change of post-buckling behaviour between the initial structure and optimum structure. Numerical results can be used as useful information for future research of large spatial structures.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.747-754
• /
• 2002

Cold-formed steel truss system was reviewed in order to improve the various problems associated with the steel floor joist system, such as the structural deficiency caused by web punching and others. Two types of floor truss system using cold-formed steel were reviewed during this research project, including the square end type(SE type) and underslung type(EE type). The strctural behavior was analyzed using the AISI design criteria and various bending tests. Test results show that the SE type floor truss proved to be more efficient than the EE type when it is subjected to concentrated load, and that the unbraced length of the floor truss about the weak axis has much importance on the buckling strength of the floor truss. Test results indicate that their values surpass the calculated values predicated through the AISI design criteria.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.23-38
• /
• 1990

In this study, decompositive optimization method of two levels was selected to optimize effectively the geometry of the truss which takes the multi-loading condition, and the allowable stress, bucking stress, displacement and natural frequency constraints into consideration. The algorithm of this study is made up of sectional optimization using the feasible direction method in level 1, and geometrical optimization employing Powell's one-direction search method which menimizes only objictive function in level 2. The results of this study acquired by beenning applied to structural model of the truss are as follows : 1. It is verified that the algorithm of this study effectively converges, independent of the initial geometry of the truss and the applied various constraints. 2. The optimum goemetry of the truss varies more considerably according to the constraints selected. 3. Under the condition of the same design, the weight of the truss can be decreased more considerably by means of optimizing even the geometry of truss than by means of optimizing the section of truss while fixing geometrical configuration of it, even though there might be a little difference according to the initial geometry of the truss and the design condition.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.2
• /
• pp.103-112
• /
• 2005

This study examines the stability of Sungsu bridge which was issued nine years ago because of its collapse accident and now is on the progress of extension work in each construction stage by construction monitoring system. From this study, the measured value in each construction stage of anchorage truss and suspended truss shows the agreement with the analytical values up to 60~110 percents, and the elements' stresses emanating from the pre-loading stage, are also similar to the analytical value. Regarding these results, it is expected that each member has enough stiffness and the construction condition is satisfactory. In addition, it is expected that the transverse members and sway bracing bolts integrate completely the existing truss and new attached truss as a one body from the result of the vibration test to find out the integration rates.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.2 s.24
• /
• pp.75-82
• /
• 2007

Building costs means capital costs which include cost of land, cost of acquiring and preparing the site, construction costs, engineering fees, furnishings, cost of financing the project, and cost of management required to run and maintenance the building for use. An economic analysis is one of the most important factor to determine the project feasibility. The purpose of the this study is to analysis on the construction cost structure of steel truss stadium.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.135-141
• /
• 2009

The composite truss has been widely used for tall buildings and long-span structures in North America. As compared with other similar structures, it has merits such as reduction of construction period, low span/depth ratio, low dead weight and so on. It has the most effective trait for structures with long span of 12~18m. After collapse of WTC, the fire resistance behaviors of structures have been actively conducted under various fire conditions in several country. This study showed that the surface temperature of steel member in the composit truss beam was reached to $700^{\circ}C$ under the fire condition of a short time. Under the same condition, the temperature in concrete was within $200^{\circ}C$. The composit truss beam with 20mm bracing was collapsed by rapid deflection after about 3minutes. However, the beams with 25mm, 35mm, and 45mm bracing were not collapsed, even though those were reached to deflection standard of L/20 within 15minutes.

• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.7-18
• /
• 1997

본 고에서는 컴퓨터를 이용하여 비선형문제를 어떻게 다룰 것인가에 관해 기초 지식에서부터 응용까지를 간단히 설명한다. 먼저 기하학적 비선형 문제를 중심으로, 기존의 비선형 해석기법에 관해 기초적인 기법부터 고난도의 기법까지 일반적으로 많이 사용되는 것을 자세히 소개한다. 또 대공간 구조물의 비선형 해석기법에 관한 이해를 돕기 위해 비교적 간단한 부재인 케이블/트러스 요소를 이용한 몇몇 예제와 비선형해석으로 인한 구조물 거동의 특성도 다룬다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.49-55
• /
• 2004

The increase of computing power makes stochastic optimization algorithms available in structural design. One of the stochastic algorithms, simulated annealing algorithm, has been applied to various structural optimization problems. By applying several cooling schedules such as simulated annealing (SA), Boltzmann annealing (BA), fast annealing (FA) and adaptive simulated annealing (ASA), truss structures are optimized to improve the quality of objective functions and reduce the number of function evaluations. In this paper, many cooling parameters have been applied to the cooling schedule of ASA. The influence of cooling parameters is investigated to find the rules of thumb for using ASA. Tn addition, the cooling schedule combined with BA and ASA is applied to the optimization of ten bar-truss and twenty five bar-truss structure.