• Korean Journal of Construction Engineering and Management
• /
• v.21 no.4
• /
• pp.100-107
• /
• 2020

In this paper, a study was conducted on the method of establishing the master plan standard for rational decision-making about utility tunnel construction in the existing urban. In the previous study, the optimal route was selected by the feasibility assessment. However, in order to increase the objectivity of the installation conditions of the utility tunnel in the master plan standard, comprehensive evaluation of the results by feasibility and economics analysis calculates the overall ranking for all sections analyzed. In addition, based on the results of the comprehensive evaluation, a method for establishing a mid·long term investment plan was introduced after reviewing the project to be conducted in the region. Additionally, in order to review the establishment of the standard suggested in the paper, an analysis was conducted by applying the master plan procedure to the northwestern urban zone of seoul.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.612-618
• /
• 2020

In recent years, the demand for external window cleaning has increased, but the process is a very dangerous manpower-dependent operation. In addition, it is difficult to clean at the desired frequency in a business that values cleanliness. Therefore, there is a need to automate this work. This paper presents the concept of a device that can be attached to a specific window and clean the window continuously. The economic feasibility of this device was analyzed. The estimated manufacturing cost of the equipment was approximately 10 million won, but the possible investment cost was at least 9.8 million won for five years of endurance and 103 million won for 10 years of endurance. Therefore, the expected savings well exceed the equipment cost, and it was evaluated as having economic feasibility. Since this study analyzed only quantitative indicators, the expected cost reduction due to a reduction in safety accidents, productivity improvement, construction time reduction, and quality improvement was not considered. Therefore, it is expected that the calculated economic feasibility will be more accurate if the cost reduction effect by the automation equipment is calculated by adding the expected values not considered in this study.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.09a
• /
• pp.144-155
• /
• 1995

본 연구는 기술에 대한 대용개념으로 사용되고 있는 연구개발투자의 효과가 산업의 생산성 향상에 얼마만큼 기여하고 있는가에 관한 실증연구로, 그 효 과를 자체 연구개발효과와 파급효과로 나누어 측정하는 데 목적이 있다. 파 급효과의 경우, 중간재의 거래를 통한 체화된 파급효과와 산업간의 기술거리 로 인한 비체화된 파급효과로 나누어 한국 제조산업을 18개로 분류한 후 각 산업의 연구개발스톡을 측정하였으며, 연구개발투자의 체화된 파급효과 측정 을 위하여 산업 연관표를 이용하여 가중치를 계산하였다. 그리고, 비체화된 파급효과 측정을 위하여는 각 산업에서 고용하고 있는 전공별 연구원 수의 자료를 이용 기술거리를 구하였다. 본 연구에서는 각각의 가중치로 구한 연 구개발스톡, 체화된 연구개발 스톡, 그리고 비체화된 연구개발 스톡을 이용 하여 각 독립변수들에 대한 한계생산성을 구하였으며, 분석 방법으로는 단순 회귀분석과 함께 시계열의 효과와 산업간 효과를 고려하는 패널데이터 분석 을 시도하였다. 체화된 파급효과와 비체화된 파급효과 중 하나만을 변수로 포함하는 경우에는 추정치가 유의한 결과를 나타내고 있지만, 두 가지의 변 수를 모두 포함하는 경우에는 보호도 일정하지 않으며 비유의적인 결과를 보였다. 이러한 결과는 다중공선성에 의한 것으로 보인다. 두 가지 파급효과 에 대한 한계생산성 추정치는 기술과 연구개발투자가 외부성을 가지고 있으 며, 기술과 관련된 변수의 도입이 필요함을 시사한다. 또한 이러한 파급효과 의 추정치는 거시차원에서 연구개발 지원의 정당성에 대한 근거를 제시하고 있으며, 기술혁신을 위한 투자의 타당성을 실증적으로 보여주고 있다.사하였다. 이 사례 연구들의 결과는 각 계열사들의 상황에 따라 제시된 외주위탁 전략과 현재의 외주위 탁 전략이 일치할 때 정보 시스템에 대한 사용자 만족도가 보다 높은 것으 로 나타났다. 할 수 있는 효율적인 distributed system를 개발하는 것을 제시하였다. 본 논문은 데이타베이스론의 입장에서 아직 정립되어 있지 않은 분산 환경하에서의 관계형 데이타베이스의 데이타관리의 분류체계를 나름대로 정립하였다는데 그 의의가 있다. 또한 이것의 응용은 현재 분산데이타베이스 구축에 있어 나타나는 기술적인 문제점들을 어느정도 보완할 수 있다는 점에서 그 중요성이 있다.ence of a small(IxEpc),hot(Tex> SOK) core which contains two tempegatlue peaks at -15" east and north of MDS. The column density of HCaN is (1-3):n1014cm-2. Column density at distant position from MD5 is larger than that in the (:entral region. We have deduced that this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을

• Journal of Korea Technology Innovation Society
• /
• v.22 no.2
• /
• pp.207-219
• /
• 2019

The international trends in activities of government R&D performance measurement is evolving into evidence-based approach to support the verification of objective policy implementation. The European Commission has been implementing KETs (Key Enabling Technologies) policy that incubates nanotech based emerging technologies to support the fourth industrial revolution/revitalization of high-tech manufacturing, and resulting innovations are quantified by KETs Observatory project. The European Commission also built Innovation Radar system that monitors potentially innovative projects within FP7 and Horizon2020 by data analysis. The United States is also upgrading its Federal RePORTER system to quantitatively monitor federal R&D investments with outcomes (including nanotechnology). In the field of Korean nanotechnology, basic statistical data by analyzing NTIS (National Science & Technology Information Service) information is applied in policy field. Developing innovation measurement methodology beyond basic statistical analysis is an international policy issue, and a long-term R&D investment area of a government. The objective of this model study is to quantify the innovation potential of nano R&D investments conducted by Korea government, using input-output based efficiency measurement model and NTIS (National Science & Technology Information Service) that is comprehensive data portal for national R&D investments/outcomes including nanotechnology.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.221-229
• /
• 2020

As the cosmetics beauty industry grows into a key next-generation industry, the establishment of an industrialization center is needed, but failure to verify the adequacy and feasibility of the investment could lead to financial burdens. In this study, the project costs and facilities of an industrial center are reviewed to analyze its economic feasibility based on the cost estimates, revenue estimates, estimated profit or loss calculations, and estimated operating cash flows. The profit estimation criteria were analyzed by applying 90 per cent of expected orders for research projects (24 billion won) and 12 per cent of rental rates for testing equipment (4.5 billion won for construction), and the benefit/cost ratio is higher than 1.02 per cent and the net present value is higher than '0' won, and the internal rate of return is also more than 5.06 per cent for all three analytical methods. Therefore, in order for the construction of a cosmetics beauty industrialization center to be economically feasible, it is necessary to maintain research project orders of more than 90 percent and return on equipment rent of more than 12 percent, and a strategic approach is needed to diversify business profits.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.2
• /
• pp.98-110
• /
• 2023

The smart city public and private partnership project is a project to build and operate a sustainable city by investing land and capital in public-private partnership to build urban infrastructure and providing various urban services. It highly depends on the precise feasibility study and the projection of the various factors affecting the project during the planning stage to get the project successful. However, it is very difficult to predict the possibility of the project success in advance due to various physical and social factors. It is necessary to derive factors affecting the project at the planning stage and respond with appropriate analysis in order to solve these problems and to carry out a successful project. Therefore, this study derived preliminary components for feasibility study through previous studies and order status analysis and presented feasibility study components such as five-step processes, 10 process items, 19 analysis items, and 54 detailed analysis items through the Delphi method. It can be expected that this research is to contribute corresponding to diversified possible risks and facilitate the projects during the promotion.

• Journal of Energy Engineering
• /
• v.10 no.4
• /
• pp.327-334
• /
• 2001

Heat is wasted by unconcern in industrial complex. This paper presented for using waste heat, which investigated step by step from searching waste heat to starting construction before and directly applied for the using waste heat in the actual site. Especially, using heat is assessed by investigation of heat supply and demand. Design of heat transportation system was made base on analysis of heat balance between demand and supply, which was analyzed by economical efficiency and property. Payback-period on investment was 1,909 years that was comparatively a short period of time in assessment.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1037-1038
• /
• 2011

전 세계적으로 에너지 절감에 대한 요구가 점차 증가함에 따라 가장 많은 전기 에너지를 소비하는 산업용 전동기에 대한 에너지 절감에 대한 요구가 증대되고 있다. 보통의 산업용 전동기에 인버터를 장착 할 경우, 가장 에너지 절감 효과가 높은 부하는 Fan이나 Pump부하이다. 따라서 많은 인버터 제조업체들이 이러한 부하에 적합한 인버터를 출시하여 현장에 적용하고 있다. 또한, 국가에서 적용하는 ESCO 정책과 같은 정부 보조에 힘입어 더욱더 시장이 확대가 되고 있는 실정이다. 이에 기존의 범용인버터에 대한 에너지 절감 사례들은 많이 적용이 되어 왔으나 고압인버터가 실제 Site 에 적용이 되어 어느 정도의 에너지 절감을 가지는 사례는 알려져 있지 않은 실정이다. 이에 취송수설비 현장에 고압 인버터를 적용하여, 전력비 절감은 물론 투자비 절감으로 우수한 경제성을 확보한 사례에 대하여 소개하며 그 타당성을 입증하고자 한다.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.1
• /
• pp.115-126
• /
• 1998

A GDHS(Geothermal District Heating System) is a heating system supplying a group of districts with heat extracted from geothermal sources. Due to various advantages of GDHS including the saving of fuel consumption as well as the reduction of air pollution, a world-wide trend is to replace central/individual heating systems with GDH systems. The basic point of this paper is that a crash program mentality leads to inappropriate decisions about policy issues in large-scale research and development like the development of GDHS, R&D funding should be viewed as a sequential decision, not a once-and-for-all choice. Hence we develop on economic feasibility assessment model based on a continuous sequential decision process for the Chejoo Island GDHS Project by modifying Roberts's model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.89-98
• /
• 1998

Some analytic results for a solenoid eddy current coil to test nondestructive conducting materials are described in this paper. Normalized impedance of solenoid coil encircling cylindrical conducting tubes or tow-conductor rods is analyzed. Electrical and magnetic properties such as conductivity, permeability and exciting frequency as well as the geometric ones of fill factor or radius ratio of the conductor are also considered. Impedance characteristics of the models obtained by numerical analysis are examined. Validation of the model is carried out using several samples of non-ferromagnetic conducting tubes and 2-conductor rods.