• Journal of Korean Society of Forest Science
• /
• v.113 no.2
• /
• pp.259-270
• /
• 2024

Since 2013, Korea has allocated significant budgets and manpower nationwide to prevent the spread of pine wilt disease and to reduce damage. As a result, the number of damaged trees decreased from 2.18 million in 2014 to 310,000 in 2021. However, the damage has increased again since then. Despite the overall decrease in the number of damaged trees, the scope of the damage continues to expand every year. Previous studies have develope In order to judge the control performance, a quantitative control performance analysis method to objectively evaluate control performance. This method takes into consideration two factors-quantity change and the change in the damage area, which is an area factor. This approach provides a more comprehensive assessment than the control guidelines that only suggest changes in damage grade based on the volume of damaged trees. The expansion of the damage range is also an important factor in analyzing control performance, but previous studies have not reflected this. Therefore, this study calculates the change in the distance of the pine wilt disease boundary area for Gyeongsangbuk-do, where changes in the damage range can easily be observed from year to year. The study then creates application criteria and coefficients and uses them to improves control performance index calculation formula. As a result, it was possible to calculate a quantitative analysis of the control performance, taking into account the changes in the damage range. When the improved formula was applied to 26 cities, counties, and districts in Gyeongsangbuk-do, it slightly decreased or increased compared to the existing calculation formula. This confirmed that the control performance index can change from a positive value (+), indicating increased damage, to a negative value (-), indicating reduced damage.

• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.578-586
• /
• 2016

In this study, we evaluated the effects of soil incorporation of crotalaria as a green manure on the growth and yields of 'Seolhyang' strawberry and inorganic soil nitrogen levels in a greenhouse. Four different N treatments were used, as follows: zero N fertilizer (control), crotalaria, crotalaria with 50% urea, and 100% urea. The recommended N requirement (100% urea) for strawberry was $86kgN{\cdot}ha^{-1}$ and 50% of the recommended N (50% urea) was $43kgN{\cdot}ha^{-1}$. Crotalaria was sowed on June $17^{th}$, 2011 and cultivated for 37 days. The amount of N supply from soil incorporation of crotalaria was $104kgN{\cdot}ha^{-1}$. Strawberry was planted on September $9^{th}$, 2011 and cultivated for 255 days after planting. The concentrations of soluble solids and acidity of strawberry fruits for the crotalaria treatment were higher than for the crotalaria with 50% urea and 100% urea treatments. On the other hand, the growth and yield of strawberry was the highest for the crotalaria with 50% urea and 100% urea treatments, followed by the crotalaria treatment, and the lowest for the control. Soil inorganic N concentration for the crotalaria treatment was continuously decreased to $24mg{\cdot}kg^{-1}$ at the end of the growing season, while crotalaria with 50% urea and 100% urea treatments maintained an inorganic N concentration that ranged from 35 to $50mg{\cdot}kg^{-1}$. These results indicate that the amount of N supply from soil incorporation of crotalaria may not be enough because strawberry yield was lower than for other N treatments. Therefore, additional nitrogen, such as 50% urea after soil incorporation of crotalaria, is recommended.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.257-290
• /
• 2005

Korean energy use in industrial sector has increased more rapidly than other sectors during 1980~2000 periods. Relatively higher increases in industrial sector energy consumption raise questions whether government policy of rationalization of industrial energy use has been effective. In this study, we use 80-85-90 and 90-95-00 constant price input-output table to analyze increases in industrial energy use. Using an adjusted version of structural decomposition model introduced by Chen and Rose (1990), we decompose Changes of energy use into 17 elements. We classify entire industry sector into 32 sectors including four energy sectors (coal and coal products, refined petroleum, electricity and town gas). We then analyze changes of energy use by industrial level to check differences among industrial energy demand structures. Finally, we compare three industries, electronic product manufacturing, metal manufacturing and construction, that represent technology and capital intensive, energy and material intensive and labor and capital intensive industry. As results, we find that high energy using industries make the most effort to reduce energy use. Primary metal, petrochemical and mon-metal industries show improvements in elements such as energy and material productivity, energy and material imports, energy substitution and material substitutions towards energy saving. These results imply that although those industries are heavy users of energy, they put the best effort to reduce energy use relative to other industries. We find various patterns of change in industrial energy use at industrial level. To reduce energy use, electronic product manufacturing industry needs more effort to improve technological change element while construction industry needs more effort to improve material input structure element.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.343-348
• /
• 2008

To investigate the effects of incorporation of green manures (GM) into a sandy loam soil on growth, yield, and nutrient uptake of tomato (Lycoperiscon esculentum Mill.) and nutrient balances (input minus offtake of nutrients), five tomato production systems were compared under the condition of plastic film house: 1) a no input system (no additional amendment or inputs, 0-To-0-To); 2) a conventional system (application of N-P-K chemical fertilizers, Cf-To-Cf-To); 3) a leguminous GM-containing system (hairy vetch-tomato-soybean-tomato, Hv-To-Sb-To); 4) a graminaceous GM-containing system (rye-tomato-sudan grass-tomato, Ry-To-Sd-To); and 5) system mixed with leguminous and graminaceous GMs (rye-tomatosoybean- tomato, Ry-To-Sb-To). Here, hairy vetch and rye were cultivated as winter cover crops during late $Dec{\sim}late$ Feb and soybean and sudan grass were cultivated as summer cover crops during late $Jun{\sim}mid$ Aug. All of them cut before tomato planting and then incorporated into soil. Biomass of GMs was greater in summer season than that of winter season. Nitrogen amount fixed by a leguminous plants was about $126\;kg\;ha^{-1}$ per a cropping season, corresponding to 60% N level needed for tomato production, which was comparable to 50 and $96\;kg\;ha^{-1}$ fixed by rye and sudan grass. As a result, tomato yield of Hv-To-Sb-To system (legume GM treatment) was similar to Cf-To-Cf-To (conventional), but that in Ry-To-Sd-To system (graminaceous GM treatment) was not attained to a half level of conventional treatment. Nutrient budgets for N, P and K on the conventional farm were balanced or somewhat positive exception for minus-balanced K. Ry-To-Sd-To system showed a positive N, P and K budgets due to the depressed growth of tomato which is caused by high C/N ratio and low N-fixing capacity of the GMs. Inversely, those of Hv-To-Sb-To system were negative in all of N, P and K budgets because of increased growth and yield of tomato with high nitrogen-supplying capacity as well as low C/N ratio of leguminous GM. In conclusion, although conventional cultivation has an advantage in relation to N, P and K nutrient budgets rather than GM-incorporated systems, a leguminous GMs could be recommended as nitrogen reservoir and soil amendment because the yield of tomato between use of leguminous GM and conventional cultivation was not only significantly difference, but also GMs commonly reduce nutrient loss and improve microbial communities.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.5
• /
• pp.619-624
• /
• 1996

An experiment was carried out to find out the effects of water foxtail on weed control and rice yield as well as on the reduction of nitrogen application in no tillage transplanted paddy field. Paddy field was dominated by water foxtail whose soil covering degree was adjusted from 8 to 6 by treatment of paraquat (70 l /10a of solution diluted by 1, 000 times). Thirty five-day old seedling was mechanically transplanted and reduced nitrogen, 80% of conventional application was applied at the paddy field. The higher failure in seedling stand was observed at higher degree of soil covering by water foxtail. The failure of seedling stand with covering degree of 8(no paraquat) was 37.4%, while that of covering degree of 6(paraquat-treated) was 12.3%. However, the seedling stand failure was completely recovered at covering degree of six at two weeks after transplanting. The mechanical transplanting made water foxtail in the paddy field fall on the ground whose panicle part was recovered from falling sometimes after transplanting and whole plant died with slow scenesence untill the late of June. But the water foxtail affected by paraquat produced the new panicle from uppernode of stem with dead leaves at early of June and it become die slowly untill the early of July. Though several rice field weeds were observed in the order of Echinochloa crusgallis, Cyperus serotinus, Lemma paucicostata during the active tillering stage of rice, the value of weed control due to the dominance of water foxtail was 77~78%. The death and subsequent decay of water foxtail during the active tillering stage of rice induced the soil reduction which again defect the growth of rice root. The more vigerous rice growth was observed in the plot dominated with water foxtails, than control plot. The yields of rice in the water foxtail (degree 6) plot was 629kg per l0a as brown rice, the same as that of control plot. In conclusion, the no-tillage transplanting with control of covering degree of water foxtail (to degree 6) was effective in reduction of input cost such as herbicide and nitrogen fertilizer, as well as weed control without reduction of rice yield.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.253-260
• /
• 2005

Salt accumulation in the plastic film house soils under continuous cultivation condition causes problems such as salt damages to plants, nitrate accumulation in vegetables, groundwater contamination, etc. due to excess application of fertilizers. Objective of this research was to find an optimum adsorbent to reduce salt concentration in the soil solution of plastic film house soils, where crop injuries have been observed due to the salt accumulation. The soils were significantly high in available P $(1,431{\sim}6,516mg\;kg^{-1}),\;NO_3-N\;(117.60{\sim}395.73mg\;kg^{-1})$, exchangeable Ca $(4.06{\sim}11.07\;cmol_c\;kg^{-1})$ and Mg $(2.59{\sim}18.76\;cmol_c\;kg^{-1})$, as compared to those of the average upland soils in Korea. Soils were treated with each of adsorbent such as ion-exchange resin, zeolite, rice bran, etc. at 2% level and prepared into saturated-paste samples. After equilibrium, soil solution was vacuum-extracted from the soil and measured for changes of the pH, EC, and concentrations of $Ca^{2+},\;Mg^{2+},\;K^+,\;Na^+,\;{NH_4}^+,\;{PO_4}^{3-}\;and\;{NO_3}^-$. Rice bran effectively removed ${PO_4}^{3-}\;and\;{NO_3}^-$ in the soil solution up to 100%. Efficiency was decreased in the orders of rice bran > ion-exchange resin > zeolite. Removal efficiencies of zeolite and ion-exchange resin for $Ca^{2+}$ were ranged from 1 to 65% and from 7 to 61%, respectively. Ion-exchange resin was also effective for removing $Mg^{2+},\;K^+,\;Na^+,\;and\;{NH_4}^+$. Overall results demonstrated that rice bran and ion-exchange resin could be applicable for salt accumulated soil to remove the respective anion and cation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.4
• /
• pp.216-222
• /
• 2002

Field experiments were conducted to investigate the effect of various cultural practices on methane($CH_4$) emission in tillage and no-tillage practice in a clayey paddy soil from 1998 to 2000. The factors evaluated in tillage and no-tillage methods were types of nitrogen fertilizers, application method of chemical fertilizers, rice straw application and cultivation method. Of the nitrogen fertilizers, the amount of $CH_4$ emission in ammonium sulfate plot was the lowest, regardless of tillage and the application method. 26.4~41.1% of reduction by ammonium sulfate compared with urea. But in no-tillage which have problem of poor rice yield than tillage, coated urea was more effective nitrogen fertilizer because that showed similar $CH_4$ emission and highest rice yield at 80% of dosage of nitrogen. No-tillage plot emitted lower $CH_4$ than tillage plot where the fertilizers were incorporated. On the contrary, no-tillage plot showed a little higher $CH_4$ emission compared with tillage plot for the surface application. When rice straw was applied, no-tillage practice reduced methane emission by 26.6% compared with tillage practice, but showing a little difference of 10.7% in no application. With cultivation method, no-tillage practice reduced methane emission 26.6% compared with tillage for the 30-d-old seedling transplanting. But for the dry direct seeding practice, no-tillage was a less effective because considerable amounts of rice straw incorporated by tillage were more decomposed aerobically in the soil and emitted as $CO_2$ to the atmosphere with flooding in no-tillage soil.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.1
• /
• pp.41-46
• /
• 2003

The suitability of the life Cycle Assessment (LCA) methodology to analyze the environmental impact of rice cultivation with different fertilizing systems is investigated. The arst part of an LCA is an inventory of parameters used and emissions released due to the system under investigation. In the following step, the Life Cycle Impact Assessment the inventory data were analyzed and aggregated in order to finally get one index representing the total environmental burden. For the life Cycle Impact Assessment (LCIA) the Eco-indicator 95 method has been chosen because this is well documented and regularly applied impact assessment method. The resulting index is called Eco-indicator value. The higher the Eco-indicator value the stronger is the total environmental impact of an analyzed fertilizing system. The rice field experiment conducted in middle parts of korea was chosen as an example for the life cycle impact analysis. In this experiment the treatments were consisted of none fertilizer plot (NF), standard fertilizer plot (SF) applied chemical fertilizers based on soil chemical analysis before rice transplanting, and efflux fertilized plot (EF) applied with pig wastes fermented as the same rates of SF plot as basis on total nitrogen content. The obtained Eco-indicator values were clearly different among the treatments in the rice trial. The total Eco-indicator values for SF and EF have been observed 58 and 38% relative to the NF, respectively. For all the treatments the environmental effects of eutrophication contributed most to the total Eco-indicator value. The results appeared that the LCA methodology is basically suitable to assess the environmental impact associated with different fertilizer applications for rice cultivation. A comparative analysis of the fertilizing system's contribution to global warming and eutrophication is possible.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.2
• /
• pp.109-117
• /
• 2013

The Global Framework on Climate Services (GFCS) will guide the development of climate services that link science-based climate information and predictions with climate-risk management and adaptation to climate change. GFCS structure is made up of 5 pillars; Observations/Monitoring (OBS), Research/ Modeling/ Prediction (RES), Climate Services Information System (CSIS) and User Interface Platform (UIP) which are all supplemented with Capacity Development (CD). Corresponding to each GFCS pillar, the Commission for Agricultural Meteorology (CAgM) has been proposing "Global Initiatives in AgroMeteorology" (GIAM) in order to facilitate GFCS implementation scheme from the perspective of AgroMeteorology - Global AgroMeteorological Outlook System (GAMOS) for OBS, Global AgroMeteorological Pilot Projects (GAMPP) for RES, Global Federation of AgroMeteorological Society (GFAMS) for UIP/RES, WAMIS next phase for CSIS/UIP, and Global Centers of Research and Excellence in AgroMeteorology (GCREAM) for CD, through which next generation experts will be brought up as virtuous cycle for human resource procurements. The World AgroMeteorological Information Service (WAMIS) is a dedicated web server in which agrometeorological bulletins and advisories from members are placed. CAgM is about to extend its service into a Grid portal to share computer resources, information and human resources with user communities as a part of GFCS. To facilitate ICT resources sharing, a specialized or dedicated Data Center or Production Center (DCPC) of WMO Information System for WAMIS is under implementation by Korea Meteorological Administration. CAgM will provide land surface information to support LDAS (Land Data Assimilation System) of next generation Earth System as an information provider. The International Society for Agricultural Meteorology (INSAM) is an Internet market place for agrometeorologists. In an effort to strengthen INSAM as UIP for research community in AgroMeteorology, it was proposed by CAgM to establish Global Federation of AgroMeteorological Society (GFAMS). CAgM will try to encourage the next generation agrometeorological experts through Global Center of Excellence in Research and Education in AgroMeteorology (GCREAM) including graduate programmes under the framework of GENRI as a governing hub of Global Initiatives in AgroMeteorology (GIAM of CAgM). It would be coordinated under the framework of GENRI as a governing hub for all global initiatives such as GFAMS, GAMPP, GAPON including WAMIS II, primarily targeting on GFCS implementations.

• Journal of Life Science
• /
• v.23 no.9
• /
• pp.1079-1087
• /
• 2013

Speed germination success and robust vegetative growth of citrus rootstock through improved sowing methods and fertilizer inputs offer the usage of root system for the citrus. The current study evaluated the influence of seed coat removal and different fertilizer concentrations on plant germination and plant growth of spontaneous rootstock siblings. Decoated and coated seeds of diploid and tetraploid plants were sown in tubes. Commercial fertilizer concentrations of 0, 2, 4, 6, 8 and $10g{\cdot}l^{-1}$ were added. The experimental layout followed a randomized block $2{\times}6$ factorial design (seed coat removal ${\times}$ fertilizer concentration) for each rootstock. Fertilizer concentrations were 0, 10, 20 and $30g{\cdot}l^{-1}$ of the fertilizer for the resistance of the strength on the salt level. The germination rate of seeds without testa sown in vitro was improved (67-80%) compared to that of nontreated seeds. The eventual tree height of the seeds without testa in the diploid group was increased due to higher fertilization compared to that in the nontreated group. The removal of seed testa promoted the seed germination of both diploid and tetraploid trifoliate orange and resulted in greater height. Their vegetative development was also increased due to the increased fertilization of the rootstock. The Fv/Fm value for the diploid plants was 0.4 and 0.8 for the tetraploid ones under salt stress after 11 days of treatment. The removal of seed testa may improve the seed germination of trifoliate orange. Tetraploid trifoliate orange appears to possess resistance to salt stress compared to the diploid variety.