• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.227-232
• /
• 2016

3D body scan data are used widely in various fields to make products and living spaces for superior human body fitness. Based on the 3D measurements of human bodies for teens in Size Korea 2013, this research provides a way of finding the representative body sizes and 3D body scan data. First, a multi-dimensional vector space consisting of many measurement items was projected onto a 2D vector space with circumference and length components via factor analysis. The representative body sizes and 3D scan data close to these values were obtained via the Mahalanobis distance in 2D space. Considering the adolescent growth pattern shown on this 2D space, males were divided into 4 age groups and females were divided into 3 age groups. Using the eigenbodies corresponding to the column vectors of the component score coefficient matrix, the representative body sizes of 13 measurement items (male) and 14 measurement items (female) for each age group were calculated. The representative body sizes and 3D scan data are very useful for modeling representative 3D human figures.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.4
• /
• pp.365-372
• /
• 2001

The general rule of boundary delimitation is a the principle of equidistant. The principle of equidistant is a method that determine boundary delimitation from fixed distant of baseline or basepoint. In this paper, study Two-Point Algorithm and Three-Point Algorithm that are widely used. and developed the Boundary Delimitation Program to verify the result and error. This program is specially useful for maritime boundary delimitation problem because there is no artificial and natural object in sea to determine boundary. As a result The mid-points computed on Ellipsoid have small error rather than mid-points on plane or sphere without any distortion by map projection. Through developing boundary delimitation program, can eliminate the various manipulation error using paper map, and quickly cope with maritime boundary delimitation negotiation. Also, verify that the error of basepoint in baseline is propagate the mid-point in mid-line, and determine suitable reference plane.

• Journal of Life Science
• /
• v.8 no.6
• /
• pp.681-686
• /
• 1998

IASL(iodo acetamide) and MSL(maleimide) disordered the orderly helix arrangement of myosin in the rest state of spin level. Especially the effect of IASL was great. Equatorial reflection(10,11) change inferred that myosin head was moved to the vicinity of actin filament by spin level. The intensity change of 143 $\AA$ and 72 $\AA$ could offer infor-mation of the mass projection of population of myosin heads along the filament axis. The slope of intensity profile of the mass projection of 143 $\AA$ and reflection of IASL is appeared and that of MSL is appeared sharply. The dec-rease of 215 $\AA$ reflection intensity the periodical characteristic of 143 $\AA$ reflection by spin label. The raise of MSL actin reflection at 51 $\AA$ and 59 $\AA$ in the actin reflection change refers that the shifted myosin head binds a certain actin or changes an actin structure by spin label effect. Because iodo acetamide has a tendency to decease the actin reflection, actin dose not bind myosin head. From this result, we could conclude that LASL and MSL are spin labeled on SH of myosin head and disordered the helix arrangement of actin.

• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.461-473
• /
• 2010

Since eco friendly and power saving products recently got into the limelight for the protection of environment, LED light technology has caught much of attention as the next generation broadcasting lighting. The newly introduced light source has such advantages as higher efficiency, longer life and its slim and compact forms leading to conveniency in installations. When combined with digital light control it gives more dynamic and various features to lighting. In this paper, used CIE standard for measuring light sources by their purposes and forms to make a comparative analysis of spectral distribution and color rendition of LED light source to those of existing lighting systems. By means of the cast shadowing and color reproduction tests I also tried to figure out the effects of LED lighting design on TV visuals where higher quality is crucial with the audience's increasing demands for quality image.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.368-372
• /
• 1998

A 16-views 3 dimensional imaging system is designed by spatially combinding two 8-views time multiplexed image channels. Each 8-views channel composed of 3 primary color CRTs and a dichroic beam splitter which combining the three CRTs as one channel. Each CRT displays 8-view images time sequentially. These images are projected to a holographic screen of a size 1$\times$0.8 $m^2$ through a projection optics. Characteristics of the three different configurations of projection optics are examined with the optics designing program "DEMOS" to select an optimized projection optics for the system. The configulation of the optimized projection optics is found like following; images from each channel combined by two-fold mirror are projected by a projection objective through a 16-strips LCD shutter. In this configuration, the shutter should be located at the entrance pupil of the objective, and the folded edge of the two-fold mirror should contact symmetrically to the center line of the shutter.e shutter.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.39.4-40
• /
• 2009

이 연구의 목적은 고해상도 합성개구레이더 센서를 탑재한 관측위성의 운용요구사항에 맞춰 임무기간 동안 관측 목표지역을 주기적으로 반복하고 지상궤적을 $\pm2km$ 범위 내에서 안정성을 갖도록 유지 조정하는 궤도제어 알고리즘 연구를 수행하는데 있다. 기존에 수행되어 왔던 지상궤적에 대한 오차를 해석적으로 계산하여 궤도를 유지 조정하는 방법이 아닌 기준궤도에 대하여 상대좌표계에서 표현된 위성의 실제 접촉궤도를 기준궤도와 직접적으로 비교하여 목표궤적을 유지 조정하는 알고리즘을 연구하였다. 이를 위해 첫째, 고해상도 관측위성의 운용요구사항을 만족하는 계획된 목표궤도인 기준궤도를 설계하였다. 기본적으로 기준궤도는 임무 설계 시 완전한 주기성이 고려된 최대한 실제에 가까운 궤도이기 때문에 지구중력장 모델만을 고려하여 간략하게 설계하였다. 둘째, 실제의 인공위성의 궤도는 계획된 기준궤도를 유지해야 하지만 시간에 따라 섭동력의 영향을 받아 계획된 궤도로부터 벗어나게 된다. 기준궤도로부터 실제궤도가 얼마나 벗어나는지에 대한 정량적 분석을 위해 지구 중력장, 달-태양 중력, 대기저항력, 태양복사압, 조석력 등과 같은 다양한 섭동력의 영향에 대한 분석을 수행하였다. 셋째, 반경방향(radial), 진행방향(along-track), 교차방향(cross-track)의 세 방향의 성분으로 구성된 우주공간오차(Space Error) 개념을 적용하여, 투영된 지상궤적에 상응하는 오차를 계산하는 것 보다 안정적으로 오차를 계산하였다. 또한 운용요구사항에 따라 허용된 범위 내에서 궤도를 유지하기 위해 GVE(Gauss Variation Equation)을 이용한 궤도조정을 수행하였다. 섭동력의 분석 결과로부터 지구대기저항력, 달-태양 중력으로 인해 가장 두드러지는 장반경과 궤도이심률의 변화를 조정하기 위해, 임무에 사용되는 추력기의 연료 효율을 고려하여 동결궤도가 유지될 수 있는 최적의 위도이각에서 In-plane에 대한 궤도조정만을 수행하여 장반경과 이심률을 동시에 조정하였다. 지구대기와 태양활동의 영향으로 시간에 따른 장반경의 변화율에 따라 궤도조정 주기를 가지는 것을 알 수 있었고, 이 변화율 때문에 생기는 우주공간오차의 증가를 보정하여 위성의 지상궤적을 목표범위 안에서 유지할 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.190-192
• /
• 2018

This paper describes a design of an elliptic curve cryptography (ECC) processor that supports five pseudo-random curves and five Koblitz curves over binary field defined by the NIST standard. The ECC processor adopts the Lopez-Dahab projective coordinate system so that scalar multiplication is computed with modular multiplier and XORs. A word-based Montgomery multiplier of $32-b{\times}32-b$ was designed to implement ECCs of various key lengths using fixed-size hardware. The hardware operation of the ECC processor was verified by FPGA implementation. The ECC processor synthesized using a 0.18-um CMOS cell library occupies 10,674 gate equivalents (GEs) and 9 Kbits RAM at 100 MHz, and the estimated maximum clock frequency is 154 MHz.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.3
• /
• pp.328-333
• /
• 2003

NGE (Nested Generalized Exemplars) proposed by Salzberg improved the storage requirement and classification rate of the Memory Based Reasoning. It constructs hyperrectangles during training and performs classification tasks. It worked not bad in many area, however, the major drawback of NGE is constructing hyperrectangles because its hyperrectangle is extended so as to cover the error data and the way of maintaining the feature weight vector. We proposed the OH (Optimizing Hyperrectangle) algorithm which use the feature weight vectors and the ED(Exemplar Densimeter) to optimize resulting Hyperrectangles. The proposed algorithm, as well as the EACH, required only approximately 40% of memory space that is needed in k-NN classifier, and showed a superior classification performance to the EACH. Also, by reducing the number of stored patterns, it showed excellent results in terms of classification when we compare it to the k-NN and the EACH.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.1
• /
• pp.7-16
• /
• 2010

Face recognition of face images is an active subject in the area of computer pattern recognition, which has a wide range of potential. Automatic extraction of face image of the feature points is an important step during automatic face recognition. Whether correctly extract the facial feature has a direct influence to the face recognition. In this paper, a new method of facial feature extraction based on Discrete Wavelet Transform is proposed. Firstly, get the face image by using PC Camera. Secondly, decompose the face image using discrete wavelet transform. Finally, we use the horizontal direction, vertical direction projection method to extract the features of human face. According to the results of the features of human face, we can achieve face recognition. The result show that this method could extract feature points of human face quickly and accurately. This system not only can detect the face feature points with great accuracy, but also more robust than the tradition method to locate facial feature image.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.2017-2024
• /
• 1997

The main focus of this paper is the recognition of printed Hangul documents in terms of typeface, character size and character slope for IICS(Intelligent Image Communication System). The fixed-size blocks extracted from documents are analyzed in frequency domain for the typeface classification. The vertical pixel counts and projection profile of bounding box are used for the character size classification and the character slope classification, respectively. The MLP with variable hidden nodes and error back-propagation algorithm is used as typeface classifier, and Mahalanobis distance is used to classify the character size and slope. The experimental results demonstrated the usefulness of proposed system with the mean rate of 95.19% in typeface classification. 97.34% in character size classification, and 89.09% in character slope classification.