• 한국도로학회지:도로
• /
• v.15 no.3
• /
• pp.19-26
• /
• 2013

• Ecology and Resilient Infrastructure
• /
• v.3 no.2
• /
• pp.110-116
• /
• 2016

The rapid expansion of buildings and paved roads increases the risk of flood disaster in an urban area. One of the solutions can be the use of permeable pavements. This study evaluated the permeability of permeable blocks used for the roadway pavement. Joint fillers and mat sands of the investigated blocks met the corresponding standards. The flexural strength of the blocks was 5.29 MPa to meet these standards. Based on interior permeability test results after pollution, the four products evaluated were categorized into the following three levels: One for the $1^{st}$ level, one for the $2^{nd}$ level and two for the $3^{rd}$ level. From the field permeability test and pervious concrete infiltration test results nine months after their construction, all the products except one passed the quality standards of 0.1 mm/s.

• 한국도로학회지:도로
• /
• v.17 no.4
• /
• pp.62-68
• /
• 2015

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.171-171
• /
• 2016

최근 도시화가 진행되면서 지표의 불투수화가 급격하게 진행되고 강우의 지표면 유출량이 급격하게 증가하여, 강수 시 첨두유출 시간이 감소하고 단기간 집중유출이 증대되어 폭우로 인한 도시 홍수등이 발생하고 있다. 이러한 현상에 효과적으로 적응하기 위해 환경적으로 지속가능한 도시 개발을 위한 그린인프라(GI, Green Infrastructure) 및 저영향개발기법(LID, Low Impact Developpment)이 국내에 도입되고 있다. 하지만 아직까지 투수성 포장의 물순환 성능 평가 및 설계 방법에 대한 기준이 명확하지 않으며, 많은 경우 투수성 포장의 적용은 유출저감효과에 대한 정량적 해석 없이 적용되고 있는 실정이다. 이에 본 연구에서는 경남 양산시 부산대학교 제 2 캠퍼스에 있는 "한국형 GI&LID 실증실험단지"에 투수 도로형 실증실험시설을 구축하였다. 실험 시설은 불투수 아스팔트와 투수 아스팔트, 불투수 콘크리트와 투수 콘크리트 비교실험 할 수 있으며 도로표면 유출수 및 침투수에 대한 유량 및 수질 측정 모니터링을 통해 침투효과 및 특성을 분석할 수 있으며 차후 투수성 포장의 클로깅 현상으로 인한 투수성능의 감소 등 여러 가지 실험을 할 수 있을 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.882-885
• /
• 2012

소방방재청(2010)은 도시방재성능의 달성을 위하여 1시간, 2시간 및 3시간 강우지속기간을 갖는 목표강우량을 전국 지자체별로 제시한 바 있다. 본 연구는 제시된 목표강우량과 강우지속기간의 적정성을 판단 하고자, 대표적 도시유출 모형인 SWMM을 이용하여 4개 표본지구에 관하여 강우-유출 모의를 실시하고, 우수관거 및 유수지의 설계강우에 관한 임계지속기간을 분석하였다. 우수관거 지구에 관하여 강우지속기간 1시간인 경우와 임계지속기간의 경우에 해당되는 최대유출량을 비교하였다. 한편 저류지 및 펌프장 시설 경우에도 2시간 및 3시간 강우지속기간에 해당하는 최고수위와 임계지속기간의 최대수위를 비교하였으며, 이를 통하여 소방방재청에서 제시한 1시간, 2시간 및 3시간 강우지속기간 목표 강우량을 이용하여 도시방재성능을 평가하고 개선함에 있어서의 적용성을 보여 주었다. 또한 도시지역내 투수성면적 증대 및 분산식 저류시설의 효과를 분석하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.12
• /
• pp.49-55
• /
• 2019

Slope failure analysis entails proper understanding of various factors as well as the characteristics of ground conditions, which are difficult to achieve due to technological limits. Despite a number of past studies to clarify possible factors triggering slope failures, the impact of rainfall characteristics and infiltration rate, which are the key to estimation of slope stability in wet condition, on slope failures still remains unclear. This study has estimated permeability against various unit weights of soil based on constant head permeability tests using Jumunjin standard silica sand. One dimensional infiltration tests were conducted to estimate the infiltration capacity and the amount of infiltration taking into account the permeability and rainfall intensity. The applicability of existing empirical equations for the estimation of infiltration to granular soils was verified on the basis of the test results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.59-65
• /
• 2024

In this study, in order to improve the mechanical properties and durability of asphalt mixtures, a modifier (CSM, Cationized Silicate Modifier) was applied to asphalt to derive optimal mixing ratio conditions. Design of asphalt mixture using modified asphalt binder was conducted, and moisture resistance and dynamic stability were evaluated for optimal mixing conditions. The evaluation results showed that it exceeded the standards stipulated in the relevant guidelines, and as a result of conducting a water permeability test on the optimal mixing condition, it was confirmed that impermeable performance was secured. As a result of examining the noise reduction performance through field test, a noise reduction performance of about 10 dB was secured compared to before paving. It will be necessary to secure reliability through continuous noise generation evaluation in the future.

• Tunnel and Underground Space
• /
• v.33 no.4
• /
• pp.228-243
• /
• 2023

Bentonite is widely recognized and utilized as a buffer material in high-level radioactive waste repositories, mainly due to its favorable characteristics such as swelling capability and low permeability. Bentonite buffers play an important role in ensuring the safe disposal of radioactive waste by providing a low permeability barrier and effectively preventing the migration of radionuclides into the surrounding rock. However, the long-term performance of bentonite buffers still remains a subject of ongoing research, and one of the main concerns is the erosion of the buffer induced by swelling and groundwater flow. The erosion of the bentonite buffer can significantly impact repository safety by compromising the integrity of buffer and leading to the formation of colloids that may facilitate the transport of radionuclides through groundwater, consequently elevating the risk of radionuclide migration. Therefore, it is very important to numerically quantify the erosion of bentonite buffer to evaluate the long-term performance of bentonite buffer, which is crucial for the safety assessment of high-level radioactive waste disposal. In this technical note, Two-region model is introduced, a proposed model to simulate the erosion behavior of bentonite based on a dynamic bentonite diffusion model, and quantitative evaluation is conducted for the bentonite buffer erosion with this model.

• Economic and Environmental Geology
• /
• v.55 no.3
• /
• pp.219-229
• /
• 2022

Bentonite is being considered as a candidate for buffer material in geological disposal systems for high-level radioactive wastes. In this study, the effect of cement-bentonite interactions on bentonite alteration was investigated by reviewing the literature on studies of cement-bentonite interactions. The major bentonite alteration by hyperalkaline fluids produced by the interaction of cementitious materials with groundwater includes cation exchange, montmorillonite dissolution, secondary mineral precipitation, and illitization. When the hyperalkaline leachate from the reaction of the cementitious material with the groundwater comes into contact with bentonite, montmorillonite, the main component of bentonite, is dissolved and a small amount of secondary minerals such as zeolite, calcium silicate hydrate, and calcite is produced. When montmorillonite is continuously dissolved, the physicochemical properties of bentonite may change, which may ultimately causes changes in bentonite performance as a buffer material such as adsorption capacity, swelling capacity, and hydraulic conductivity. In addition, the bentonite alteration is affected by various factors such as temperature, reaction period, pressure, composition of pore water, bentonite constituent minerals, chemical composition of montmorillonite, and types of interlayer cations. This study can be used as basic information for the long-term stability verification study of the buffer material in the geological disposal system for high-level radioactive wastes.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.416-424
• /
• 2023

Concrete emits a large amount of carbon dioxide throughout its life cycle, and due to the societal demand for carbon dioxide reduction, research on storing carbon dioxide in concrete in the form of minerals is ongoing. In this study, cyanobacteria, which absorb carbon dioxide through photosynthesis and fix it as calcium carbonate, were applied to a porous concrete substrate, and the changes in the properties of the concrete substrate due to their special environmental curing condition were analyzed. The results showed that the calcium carbonate precipitation by the microorganisms was concentrated in the light-exposed surface area, and most of the precipitation occurred in the cement paste part, not in the aggregate. This microbially induced calcium carbonate precipitation enhanced the mechanical performance of the paste and improved the overall compressive strength as the curing age progressed. In addition, the increase in microbial biofilm and calcium carbonate improved the pore structure, which influenced the reduction in water permeability.