• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.261-269
• /
• 2024

In this paper, the acoustic performance of an absorptive silencer was enhanced by optimizing an arrangement of multi-layered absorbing materials. The acoustic performance of the silencer was evaluated through transmission loss, and finite element method-based numerical analysis program was employed to calculate the transmission loss. Polyurethane, a porous elastic material frequently used in absorptive silencers, was employed as the absorbing material. The Biot-Allard model was applied, assuming that air is filled inside the polyurethane. By setting the frequency range of interest up to the 2 kHz and the acoustic performance affecting properties of the absorbing materials were investigated when it was composed as a single layer. And the acoustic performance of the silencers with the single and multi-layered absorbing materials was compared with each other based on polyurethane material properties. Subsequently, the arrangement of the absorbing materials was optimized by applying the Nelder-Mead method. The results demonstrated that the average transmission loss improved compared to the single-layered absorptive silencer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.35-40
• /
• 1990

본 연구에서는 덕트내 입사파와 반사파의 분리가 가능한 2개 마이크로폰법 (Two-sensor Method)의 입사파와 반사파의 분리측정 정밀도를 확인하고 이 방법에 따라 입사파 음향인텐시티만을 분리 측정하여 투과손실을 구하고 이 값과 ASTM E 477규격에 따른 삽입손실 측정값을 상호 비교검토하고자 한 다.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.281-284
• /
• 2004

비닐 형태의 부가중합에 의해 생성된 비결정 폴리노보넨은 주사슬이 고리화합물로 이루어져 있으며, 높은 고체밀도와 유리 전이 온도를 나타내며, 낮은 유전상수를 가지는 특징이 있다. 광학적으로 폴리노보넨은 낮은 투과손실을 가지고 있는데, 광통신 대역인 850 nm에서 삽입 손실이 0.1 dB/cm이고, 복굴절이 0.001을 나타내어 광결합 소자 및 광소자에 응용이 기대된다. 이는 주사슬의 고리화합물에 의해 결정화되지 않아, 유리 전이 온도가 28$0^{\circ}C$로 높으면서 비결정의 투명성을 가지기 때문이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.344-348
• /
• 2007

In this paper, we propose the electrode of the Patterned Vertical Aligned (PVA) cell [1] for high transmittance. We use the 'TechWiz LCD' for calculation of the director configuration and optical characteristics to ensure the results of the proposed electrode structure. In general, the transmittance of the PVA cell depends on the shape of the electrode and cell gap. In this work the width of gate line and data line of the improved electrode design is set to be equal to that of the PVA conventional. Instead, we modified the shape of the top and bottom electrode on order to decrease the area of the defect. For verification, we compared the calculated optical transmittance of the PVA cell with the proposed electrode structure to the conventional PVA cell . As a result, we can confirm that the optical loss due to the variation of the retardation the LC cell around electrode can be definitely decreased by the proposed electrode.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1450-1454
• /
• 2007

주상복합형 주거공간에 각 실간 Cross Talking에 의한 소음을 저감시키고 실내기의 공기조화로 발생하는 팬의 소음을 저감 시키기 위하여 소음 환기 장치를 개발 하였다. 공명형과 팽창형의 특성을 적용한 복합적 소음기로 저감주파수 대역에 따른 설계가 가능하며 이 소음기 성능시험 결과 특정 주파수 대역에서 20dB이상의 삽입손실치가 발생하고, 삽입에 의한 압력손실 2mmAq 이하가 됨을 확인하였다. 본 개발품의 특성은 구조가 간단하고 분해조립이 가능하여 설치 및 유지보수가 용이한 제품이다.

• KSBB Journal
• /
• v.5 no.3
• /
• pp.223-227
• /
• 1990

This study describes the sorbitol production with permeabilized cells of Zymomonas mobilis immobilized in Ca-alginate. Toluene treated cells lose glucose-fructose oxidoreductase activity due to leaking of enzyme from the cells. In order to prevent this leakage, the permeabilized cells were immobilized in alginate and chitin. No significant loss of enzyme activity was apparent during 210h operation in a continuous process. The productivity of the continuous process was estimated to be about 3.5g/l -h for sorbitol at dilution rate $0.2h^{-1}$.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.1
• /
• pp.40-47
• /
• 2003

This study was conducted to determine the sound paths and transmitted sound level in house. An air-conditioner system was selected a typical sound source. The measured transmission loss data shows that the apertures have an significant effect on the transmitted noise and comparable with the existing theoretical data. Therefore the complex aperture was substitute to quantitative apertures approximately. An effective simulation method, ray tracing and mirror image source method, was employed in the prediction of transmitted sound level. The measured results were efficiently reflected on the simulated results. So it is important that measuring the acoustic parameter prior to the prediction of the transmitted sound level in the house.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.116-118
• /
• 2014

A shape optimization problem is formulated to optimally design aluminum sandwich panel, which is used for high speed railway vehicle. An aluminum volume used in the panel is selected as a design objective with constraints on the stiffness and the transmission loss value. The formulated shape optimization problem is solved for a well -selected initial shape. The stiffness and transmission loss value of the obtained optimal shape are compared with those of the previously-reported panel.

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.431-436
• /
• 2001

The effect of decorrelation on the coincidence is investigated with correlated photons produced by parametric down-conversion process. The degree of correlation between photon pairs is adjusted by changing the polarization dependent transmissivities of thin glass plate\ulcorner in front of two detectors. It was found that the single counts of each detectors are proportional to the transmissivity and the coincidence is proportional to the product of transmissivities of the glasses in front of two detectors.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.520-521
• /
• 2014