• The Journal of the Acoustical Society of Korea
• /
• v.30 no.2
• /
• pp.63-72
• /
• 2011

Since the detection probability is critically dependent on the target strength (TS) in active sonar and on the radiated noise level (RNL) in passive sonar, the acoustic materials for echo reduction (ER) and transmission loss (TL) are widely used for the stealth of underwater targets. In this paper, a measurement system based on the small water tank, for the frequency range of greater than 30 kHz, is developed and verified using reference targets. In order to design the water tank and the geometry of test samples, a program is developed to calculate the arrival time of interfering signals due to the reflection from water tank walls and also due to the diffraction from the edge of the test samples. Considering all the interfering signals, an optimal experimental configuration for water tank and test samples is designed and used throughout the experiment. Next, the signal processing algorithms to estimate ER and TL are developed based on the measured propagation loss reflecting the geometric spreading characteristics of the transducer. Finally, a set of reference targets such as aluminium plate and perfectly reflecting plate are used in a small water tank to verify the developed measurement system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.217.2-217.2
• /
• 2013

태양전지의 기본구조는 전면전극, 후면전극, 그리고 이들 사이에 위치하는 광흡수층으로 구성된다. 여기에 더하여 광흡수층에서 반사되거나 투과되는 빛 에너지의 손실을 줄이기 위해 윗면에는 반사방지막을, 아랫면에는 고반사막을 적용한다. 투명 태양전지의 경우 고반사막을 대신하여 선택적 투과막을 적용할 경우 변환효율을 향상 시킬 수 있다. 본 연구에서는 투명 태양전지의 구성물질로서 이용 가능한 선택적 투과 특성을 보이는 지르코니아 박막의 광학적 특성을 보고한다. RF magnetron sputtering 방식을 이용하여 지르코니아 박막을 증착하고 두께에 따른 광학적 특성 및 표면 형상 변화를 관찰하였다. 투과율 및 반사율을 측정한 결과 지르코니아 박막의 투과율은 400 nm 이상의 파장에서 약 85% 이상의 양호한 값을 나타내었다. 반사율은 평균적으로 적외선 영역에서 약 35%의 수치를 나타내었다. 이러한 광학적 특성으로부터 지르코니아 박막은 선택적 투과막으로 적합한 물질이라는 결론을 얻을 수 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.62-72
• /
• 1995

The acoustic characteristics of perforated tube muffler are studied in terms of non-dimensional wavenumber ka and admittance-ratio AZ. This study includes not only the case of perforated tubes having uniform hole distribution along the length but also the case of having non-uniform hole distributions. The acoustic hole impedance and transmission loss of perforated tube of which has various hole distributions were measured. The experimental results demonstrated that the transmission loss of perforated tube is a function of non-dimensional wave number ka and admittance-ratio AZ. The transmission loss of perforated tube muffler is predicted by the numerical method which is based on Sullivans and compared with the experimental ones.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.12
• /
• pp.1061-1066
• /
• 2016

Corrugation of a corrugated panel dramatically increases the bending stiffness per weight. However, corrugated panels show lower sound insulation performance than that of the flat plate having the same weight. Especially, in a particular frequency region, the sound transmission loss significantly decreases. Main reason of the problem is known as the local resonance. A number of local resonance modes occur above a certain frequency band and modal density rapidly increases. In this study, we investigate the relation of the sound transmission loss and the modal density. Finally, we propose a design methodology in terms of the modal density to improve the sound insulation performance of the corrugated panels without weight increase.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.920-926
• /
• 2005

In this paper, we analyzed the effect by building materials in the case of floor cell design and the penetration loss value by material in each frequency bands through an experiment in high building. Specially, the penetration loss measured about interference signal that is received to direct path, interference signal and flowed in slant path. Also, we analyzed system performance according to path of standard Cell received interference signal.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.104-105
• /
• 2014

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.572-583
• /
• 2023

Demand for wood in construction is increasing worldwide. In Korea, technical reviews of high-rise Cross Laminated Timber (CLT) buildings are under way. In this paper, Floor Impact Sound Insulation Performance (FISIP) and Transmission Loss (TL) of 150 mm thick CLT floor panels made of two domestic species, Larix kaempferi and Pinus densiflora, are investigated. The CLT slabs were tested in reverberation chambers connected vertically. When comparing Single Number Quantity (SNQ) of FISIP of the bare panels, the Larix CLT is 3 dB lower in heavy-weight and 1 dB in light-weight than the Pinus CLT. However, there was no difference when concrete toppings were added to improve the performance. As the concrete toppings became thicker, the heavy-weight was reduced by 9 dB ~ 20 dB, and the light-weight by 20 dB ~ 30 dB. And the analysis of these results with area density has confirmed that the area densities are highly correlated (R² = 0.94 ~ 0.99) to the FISIP of the CLT. The types of CLT didn't affect the TL. Comparison of theoretical TL values with measured TL values has shown that the frequency characteristics are similar but 8 dB ~ 12 dB lower in measured values. The relationship between the TL and frequency characteristics of the tested CLT slabs was derived by using the correction value.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.5
• /
• pp.644-654
• /
• 2019

In this study, the gas permeability, sound absorption coefficient, and sound transmission loss of the Paulownia tomentosa wood were estimated using capillary flow porometry, transfer function method, and transfer matrix method, respectively. The longitudinal specific permeability constant of the Paulownia tomentosa wood with a thickness of 20 mm was 0.254 for the control sample and 0.279, 0.314, and 0.452 after being subjected to heat treatments at $100^{\circ}C$, $160^{\circ}C$, and $200^{\circ}C$, respectively. The gas permeability was observed to be slightly increased by the heat treatment. The mean sound absorption coefficients of 20-mm thick Paulownia tomentosa log cross-section for the control sample and after being subjected to heat treatments at $100^{\circ}C$, $160^{\circ}C$, and $200^{\circ}C$ were 0.101, 0.109, 0.096 and 0.106, respectively. Further, the noise reduction coefficients of 20-mm thick Paulownia tomentosa log cross-section of the control sample and after being subjected to heat treatment at temperatures of $100^{\circ}C$, $160^{\circ}C$, and $200^{\circ}C$ were 0.060, 0.067, 0.062 and 0.071, respectively. The mean of sound transmission loss of the 20-mm thick Paulownia tomentosa log cross-section was approximately 36.93 dB. Furthermore, the gas permeability and sound absorption coefficient of the heat-treated Paulownia tomentosa discs slightly increased depending on the heat treatment temperature; however, the rate of increase was insignificant.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.459.2-459.2
• /
• 2014

CdTe계와 CGIS계 태양전지의 광투과층으로 CdS 박막이 많이 사용된다. Cds 박막의 필요한 물성으로는 높은 광투과도와 얇은 두께이다. 광투과층으로 사용되는 CdS 막의 광투과도가 높아야 많은 양의 빛이 손실 없이 투과하여 광흡수층인 CIGS에 도달할 수 있다. 특히, CdS막의 두께가 얇으면 밴드 갭 이상의 에너지를 가지는 파장의 빛도 투과시킬 수 있어 태양전지의 효율의 증가을 얻을 수가 있다. 그러나 CdS 막의 두께가 얇을 경우, pinhole이 생성되는 등 막의 균질성이 문제가 된다. 본 연구에서는 높은 변환 효율을 갖는 CIGS 박막 태양전지 제작에 적합한 chemical bath depostion(츙)법을 이용하여 CdS 박막을 제조하였다. 또한 반응시간, Cd 및 S source 비와 같은 증착 조건에 따른 박막의 특성을 조사하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.629-633
• /
• 1998

본 연구에서는 연성손실계수가 구조물의 진동에 미치는 영향을 살펴보았다. 세부시스템의 두께가 동일할 경우 평판으로 이루어진 구조물이 접수되면 연성손실계수가 감소하게 된다. 특히, 저주파수 대역에서 연성손실계수가 크게 낮아졌다. 그 주된 원인은 접수로 인해 평판에서 전파되는 굽힘파의 그룹속도가 줄어들기 때문이며, 접수로 인한 파워투과계수의 변화는 크지 않았다. 내부에 격벽을 가진 steel box에 공기중 연성손실계수와 접수시 연성손실계수를 적용하여 세부시스템의 속도를 구한 결과, 공기중 연성손실계수를 이용하여 구한 속도가 접수시 연성손실계수를 이용하여 구한 속도보다 약 2-3 dB정도 높게 나타났다. 선박과 같은 복잡한 구조물인 경우 연성손실계수에 의한 속도 차이는 더욱 커질 것으로 추정된다. 따라서, SEA를 이용한 접수 구조물의 진동해석에서 해석오차를 줄이기 위해서는 연성손실계수에 접수의 영향을 고려해 주어야 함을 확인하였다. 특히, 접수효과가 고려된 연성손실계수를 사용하면 SEA가 큰 오차를 보이는 중, 저주파수 대역에서 해석 결과에 대한 신뢰성을 높일 것으로 판단된다.