• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.443-443
• /
• 2008

본 연구에서는 Ga-doped ZnO(GZO)-Ag-GZO 다층 투명전극을 Dual DC magnetron sputtering system을 이용 하여 유리기판 위에 상온에서 제작하여 Ag 두께에 따른 전기적, 광학적, 구조적 특성변화를 조사하였다. Hall effect measurement와 UV/Vis spectrometer로 전기적, 광학적 특성을 분석하였으며, X-ray diffraction(XRD)와FE-SEM분석을 통해 결정성과 표면 특성을 조사하였다. FE-SEM 분석결과 island 형태에서 continuous layer로 박막의 형상이 바뀌면서 다층 투명전극의 전기적, 광학적 특성에 영향을 미치는 것을 알 수 있었다. 본 실험에서 Ag 두께 12 nm에서 가장 최적화되어 유리기판위에 상온에서 증착되었음에도 불구하고 $5.5{\times}{\times}10^{-5}\Omega$-cm, $6\Omega$/sq. 의 매우 낮은 면저항과 비저항을 각각 나타내었고 550 nm 파장에서 87 % 의 높은 광 투과도를 나타내었다. 또한 두께 12 nm의 Ag가 삽입된 다층 투명전극을 polyethylene terephthalate (PET) 기판위에 성막하여 Bending test를 실시하여 0.1% 이하의 매우 낮은 저항변화를 확인함으로써 플렉시블 기반의 디스플레이나 태양전지의 투명 전극으로서의 응용 가능성을 확인하였고 마지막으로 최적화된 다층 투명전극을 유기물태양전지의 애노드에 적용하여 기존 ITO 애노드를 대체할 수 있는 투명전극으로서의 가능성을 제시하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.97-101
• /
• 1989

Scale and rotation invariant polar-logarithmic coordinate transformation is used to achieve deformation invariant pattern recognition. The coordinate transformation is produce by a computer generated hologram (CGH). The mask fabricated by a photo (UV light) pattern generator for the 1nr-$theta$ coordinate transformation is made of the CGH whose transmission function is derived by the use of Lee's method. The optically produced coordinate transformed function is derived by the use of Lee's method. The optically produced coordinate transmission input pattern is interfaced on real-time holography. Variations of autocorrelation for scaled and rotated input patterns are suggested experimentally using implemented optical correlator.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.435-440
• /
• 2020

ZnO:Al films with about 500 nm thick were prepared by RF magnetron sputtering. The ZnO:Al films were annealed at 100 ℃, 200 ℃, 300 ℃, and 400 ℃ for 10 h, respectively. The resistivity, carrier concentration, and mobility variation of ZnO:Al films with heat treatments were measured. The causes of the resistivity variation of ZnO:Al films with heat treatments were investigated by utilizing the results of x-ray diffraction and field emission scanning electron microscope. The energy band gap, Urbach energy, and refractive index were obtained from the transmittance of ZnO:Al films. The change in electrical properties of the ZnO:Al film was explained in relation to the optical properties.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.12
• /
• pp.1071-1079
• /
• 2002

This paper reports a methodology and application lot calculating distribution of the director in a liquid crystal cell by a numerical technique. To calculate distribution of the director, we applied a three dimensional finite element method (FEM) and calculated the distributions of electric potential and director in the liquid crystal cell. We have considered the free-energy density in the bulk of liquid crystal cell and calculated the switching property by the Ericksen-Leslie equation and the Laplace equation. We have calculated the optical transmission with distribution of the director by Berreman's method and confirmed the threshold voltage and the response time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.5
• /
• pp.317-320
• /
• 2016

In order to acquire clear images capable of diagnosing cracked tooth by light transmission, the optical properties of LED light source were examined. Based on the results, the prototype which basically consisted of LED light source, bandpass filter and commercial compact camera module was designed and manufactured. The wavelength and optical power of the LED in the prototype were 850 nm and 7 mW/Sr, respectively. In evaluation of the prototype using microscope, the observation of the crack with width of above $17{\mu}m$ was possible. In addition, image analysis to obtain shape information on the observed tooth cracks was carried out.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.7
• /
• pp.408-413
• /
• 2016

The dielectric thin films applied to multi-colored semitransparent thin film solar cells have been extensively studied. In this work, we prepared GeSbTe and GeTe chalcogenide thin films using magnetron sputtering, and investigated their optical and phase-change properties to replace the dielectric films. The changes of surface morphology, sheet resistance, and X-ray diffraction of the Te-based chalcogenide films support the fact that the amorphous stability of GeTe films is superior to that of GeSbTe films. While both amorphous GeSbTe and GeTe films thinner than 30 nm have optical transparency between 5% and 60%, GeTe films transmit more visible light than GeSbTe films. It is confirmed by computer simulation that the color of semitransparent silicon thin film solar cells can be adjusted with the addition of GeSbTe or GeTe films. Since it is possible to adjust the contrast of the solar cells by exploiting the phase-change property, the two kinds of chalcogenide films are anticipated to be used as an optical layer in semitransparent solar cells.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.473-478
• /
• 2006

High quality indium tin oxide (ITO) thin films have been prepared by DC magnetron sputtering technique. By controlling the deposition parameters such as substrate temperature and oxygen flow rate, we were able to minimize the negative ion damage during the deposition. Films pr데ared under such conditions were found to posses an excel]ent electrical resistivity of $1.6\times10^{-4}{\Omega}cm$ and also found to have a optical transmission above 90%. We also observe that, increasing the oxygen now rate above 4 sccm leads to an increase in electrical resistivity of the films while the transmission was found to saturate with the increase in the oxygen gas flow.

• Journal of the Korean Vacuum Society
• /
• v.11 no.3
• /
• pp.141-150
• /
• 2002

Titanium oxide thin films were deposited by DC reactive magnetron sputtering(RMS) with Ar ion-beam assistance using end-Hall ion source at low oxygen partial pressure and long target-to-substrate distance. The optical and structural properties of deposited films were investigated by the measurement of measured transmittance and reflectance, atomic force microscope(AFM), and X-ray diffraction(XRD). The results show that the Ax ion-beam assisted RMS for titanium oxide thin films induces the higher packing density, lower absorption, and smoother surface than the conventional RMS, suggesting that it can be employed in deposition of optical dielectric coatings.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.359-359
• /
• 2009

투명전도 산화막 재료로 널리 사용되고 있는 ITO는 전기적 및 광학적 특성이 우수한 장점이 있으나, ITO의 주 재료인 인듐은 매장량이 적어서 가격이 고가인 단점이 있어 대체 재료의 개발이 시급한 상황이다. ITO 대체 TCO로 가장 유력한 후보인 Al doped ZnO(AZO)는 가시광을 투과하는 성질을 가지고 있고, 저온 공정이 가능하다는 장점뿐만 아니라 수소 분위기의 안정성 및 가격이 싸다는 장점이 있다. 본 연구에서는 양이온 금속원소(Al)과 음이온 할로겐 원소(F) 및 수소(H)를 co-doping한 ZnO 박막을 rf 마그네트론 스퍼터를 이용하여 증착한 뒤 도핑량과 진공중에서의 열처리에 따른 전기적 및 광학적 특성에 대해 고찰하였다. Al과 H를 co-doping한 ZnO의 박막의 경우 Al의 농도가 낮은 TCO박막이 전기적 특서에서 더 큰 향상을 보였으며, 동일한 F 함량에서는 H 함량이 늘어날수록 캐리어의 증가해 TCO박막의 전기적 특성이 향상되는 것으로 나타났다. 그러나 진공중의 열처리에 따른 F와 H의 거동은 반대로 나타났다. 이 연구를 통해서 $36.2cm^2$/Vs의 높은 홀 이동도와 $2.9{\times}10^{-4}{\Omega}cm$의 낮은 비저항을 가지는 ZnO계 박막의 제조가 가능하였다.

• Korean journal of food and cookery science
• /
• v.3 no.1
• /
• pp.14-19
• /
• 1987

The physicochemical properties of acorn starch were investigated by comparing acorn crude starch and refined starch, Proximate composition analysis revealed that the contents of crude protein, fat and ash were higher in acorn crude starch than in refined starch. Water binding capacity and swelling power of crude starch were a little higher than refined starch. Gelatinization temperature determined by optical transmittance and by Amylograph were $68^{\circ}C$ and $73^{\circ}C$, respectively. The viscosity of crude starch had the amylose content of 28.8%, and the molecular weight of amylose was 20, 425 and glucose unit per segment of amylopectin was 21.