• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.129-134
• /
• 2007

In general, based on traffic data in a ideal traffic condition, BPR cost function is used to a variety of transportation policies. However, Some researchers have reported that BRP cost function is not appropriate for analyzing traffic pattern as well as forecasting future demand.(Spiess, 1989 ; Singh, 1999) Therefore, in this paper to solve this problem, a methodology based on data through Micro traffic Simulator Based(MSB) is developed. As a result following outputs are obtained ; (1) presenting a methodology to develop a travel cost function through VISSIM in order to assess transportation policies and (2) developing BRP cost function and MSB cost function from data analysis through VISSIM and verifying availability of MSB function by comparative analysis.

• 한국ITS학회:학술대회논문집
• /
• 2005.11a
• /
• pp.52-57
• /
• 2005

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.19-38
• /
• 2002

To evaluate the effects of transportation system operation, usually measures of effectiveness(MOE) such as travel time, space mean speed, stop/delay ratio have been used. But, energy consumption as well as the existing MOE in transportation receives more attention as an alternative MOE in transportation operation. The purpose of this study is a development of procedure, which could measure the relative energy consumption for each alternative and compare the results. A mesoscopic simulator called INTEGRATION is used to evaluate the operation of high occupancy vehicle lane, signal optimization, lane expansion, and the application of ITS. Among those, the application of ITS shows the greatest effectiveness in energy reduction, and then lane expansion, signal optimization, and the operation of high occupancy vehicle lane in the order named. Because we don't consider the characteristics of vehicle class, Potential demand and the simulation time is just for an hour. it is recommended that a procedure for precise economic analysis and an improvement in methodology are needed in the future for the expanded application of this study.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.531-543
• /
• 2014

Research on activity-based travel demand forecasting and activity-travel simulator has received an international attention for the last two decades. Ways to develop the activity-based simulator may be manifold. It is obvious that importing an existing simulator that has been proven internationally likely reduces the development cost and the risk of failure. By definition of the activity-based approach, however, the details of an activity-based simulator inevitably relies on particular social, economic and cultural characteristics of the society where the simulator is developed. When importing such a simulator from overseas, the researcher should be aware of the importance of tuning the system for the society to which the imported system is applied. There are many potential works on this, including for example the tuning of data structure that is likely different form of the original system. The authors are yet aware of certain research on those. The current paper aims to report the result of transforming the input data for applying the existing activity-travel simulator to Seoul. The paper first introduces FEATHERS that was developed in Belgium having Albatross which is the core of system. FEATHERS Seoul that is under development and modified version of the original FEATHERS is briefly described and the related problems are discussed. The paper then explored to resolve and to alleviate such problems.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.251-264
• /
• 2008

One of the crucial elements to fully facilitate the various benefits of intelligent transportation systems (ITS) is to obtain more reliable traffic monitoring in real time. To date, point and section-based traffic measurements have been available through existing surveillance technologies, such as loops and automatic vehicle identification (AVI) systems. However, seamless and more reliable traffic data are required for more effective traffic information provision and operations. Technology advancements including vehicle tracking and wireless communication enable the acceleration of the availability of individual vehicle travel information. This study presents a UBIquitous PRObe vehicle Surveillance System (UBIPROSS) using vehicle-to-vehicle (V2V) wireless communications. Seamless vehicle travel information, including origin-destination information, speed, travel times, and other data, can be obtained by the proposed UBIPROSS. A set of parameters associated with functional requirements of the UBIPROSS, which include the market penetration rate (MPR) of equipped vehicles, V2V communication range, and travel time update interval, are investigated by a Monte Carlo simulation- (MCS) based evaluation framework. In addition, this paper describes prototypical implementation. Field test results and identified technical issues are also discussed. It is expected that the proposed system would be an invaluable precursor to develop a next-generation traffic surveillance system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.52-57
• /
• 2002

A simulation tool for an optimal ATIS design and drivers' dynamic route choice behavior analysis is developed, which is applicable to urban networks. Due to the difficulty to make drivers feel the time pressure according to traffic conditions, current SP questionnaire survey type surveys have a limitation to capture correct driver reactions to real-time traffic Information provision. The simulator Is a web-based upgraded version, named WATiSim (Web-based ATIS Simulator), to quickly perform a wide population survey with a minimal cost using INTERNET Furthermore, the time pressure issue is lessened by its interface and simulation modules. After WATiSim mimicked a VMS based ATIS in a partial network of Seoul Metropolitan, reactions of drivers to various traffic conditions were surveyed through INTERNET and analyzed using a logit model. Drivers under the ATIS environment clearly understood the provided traffic information, and their reactions were closely related to traffic conditions, scheduled delay, trip purposes as well as toll charge if any.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.3
• /
• pp.67-79
• /
• 2017

Increasing transportation dependence on the metro system has lead to the convenience of passengers becoming as important as the transportation capacity. In this study, a pedestrian simulator has been developed that can quantitatively assess the pedestrian environment in terms of attributes such as speed and distance. The simulator consists of modules designed for 3D indoor map authoring and algorithmic pedestrian modeling. Module functions for 3D indoor map authoring include 3D spatial modeling, network generation, and evaluation of obtained results. The pedestrian modeling algorithm executes functions such as conducting a path search, allocation of users, and evaluation of level of service (LOS). The primary objective behind developing the said functions is to apply and analyze various scenarios repeatedly, such as before and after the improvement of the pedestrian environment, and to integrate the spatial information database with the dynamic information database. Furthermore, to demonstrate the practical applicability of the proposed simulator in the future, a test-bed was constructed for a currently operational metro station and the quantitative index of the proposed improvement effect was calculated by analyzing the walking speed of pedestrians before and after the improvement of the passage. The possibility of database extension for further analysis has also been discussed in this study.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.36-49
• /
• 2016

A subway system is one of the major transportation modes at a metropolitan area. When it meets the other lines, the metro station, so-called transferring station, is usually threatened by severe pedestrian congestion and safety issue of transit users including the transportation vulnerable. Although transportation planners forecast travel demand at the beginning, it is not easy to predict pedestrian flows precisely for a long term if land use plans have dramatically changed. Due to expensive costs, structural extension of metro stations is limited. Therefore, it requires efficient and technical improvements as meeting the demand of pedestrian and physical characteristics. In this study, the core mechanism of pedestrian movement-based simulation model was introduced and evacuation scenarios were analyzed with the developed model. As a result, the multiple optimal routes for unexpected events at the solid space of the multiple stories are easily searched through the simulator and in the case of Sadang Station, travel time can be reduced by 60% when the evacuation information and intuitive design are provided.

• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.106-118
• /
• 2014

The objective of this study is to develop a methodology for evaluating the effectiveness of in-vehicle pedestrian warning systems. Driving Simulator-based experiments were conducted to collect data to represent driver's responsive behavior. The braking frequency, lane change duration, and collision speed were used as measure of effectiveness (MOE) to evaluate the effectiveness. Collision speed data obtained from the simulation experiments were further used to predict pedestrian injury severity. Results demonstrated the effectiveness of warning information systems by reducing the pedestrian injury severity. It is expected that the proposed evaluation methodology and outcomes will be useful in developing various vehicular technologies and relevant policies to enhance pedestrian safety.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.147-152
• /
• 2005

This study firstly developed a tool for evaluating performance requirements of automatic vehicle identification (AVI) techniques. A microscopic traffic simulator, Paramics, was employed to investigate the effects of AVI performances on the accuracy of estimating section travel times. Mote Carlo simulation approach was incorporated into Paramics to conduct systematic evaluations of identifying required AVI performances. The proposed method in this study can serve as a logical and necessary precursor to field implementation of a variety of AVI techniques toward achieving more reliable traffic information.