• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.7-16
• /
• 2009

This paper proposes a plan which can raise the accuracy of economic benefit estimation in road construction projects. The point of existing economic appraisals may be that the speeds forecasted by models are different from the field speeds because only volumes are calibrated in the road network. The result of such a calibration has an influence on estimating wrong economic benefits in terms of vehicle operating cost savings, travel time savings, and air pollution savings. Then this study performs a calibration when volumes are at the same amount but the calibration between the field speeds and model speeds is different from each other with two different volume-delay functions; the differences of benefits are confirmed according to two different speed calibrations. Three improvement schemes, including the development of a new volume-delay function, are proposed in this study in order to solve the problem of current benefit calculations. The outcome of this study will help practitioners perform more accurate benefit calculations and reasonable economic appraisals.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.49-57
• /
• 2001

Since the value of travel time savings is found to be the most important benefit of transportation projects, considerable work has been done on the estimation of the value of travel time in many countries, including U. S. A. England, Australia, and Korea. And majority of them was mode choice model. This paper estimated the VTTS for commuters using traffic regulation obedience market model, which had not been applied in any previous studies, and survey data, which was obtained using Contingent Valuation Method. The result meets our expectations.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1300-1305
• /
• 2011

Environmental Impact is getting more attention in many feasibility studies for railroad-related projects and research items. For sustainable growth and green transportation, the benefits typically used for feasibility studies in railway-related projects, are composed mostly of economic criterions which is not considering growing attention on changing paradigm. Based on the analysis of current methodologies, improvements in estimating environmental impact especially on noise and pollution are suggested.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.771-776
• /
• 2004

치수사업에서 실시하는 경제성분석은 계획하고 있는 사업의 사회적 후생의 극대화 측면에서 경제적 타당성을 분석 평가하는 것으로서 일반적으로 편익${\cdot}$비용분석이 사용되고 있다. 이러한 경제성분석시의 문제점으로 직접편익뿐 아니라 간접편익 및 비계량편익에 해당하는 사업의 효과도 편익부분의 계산에 포함할 수 있는 방법이 필요한 실정이다. 이에 따라 본 연구에서는 홍수에 의한 교통두절로 인한 피해를 간접편익으로 고려하여 오산천지역에 적용해 보았다. 교통두절피해 편익의 항목으로서 주로 차량운행비용 절감과 통행시간비용 절감의 두 항목을 고려하였으며, 이 두 항목에 내한 결과에서 홍수지체시간당(단위 1일당) 적지 않은 편익이 발생하는 것으로 나타났다. 본 연구를 통해 일반적인 치수사업 경제성분석에서 이뤄지지 않았던 교통두절에 의한 피해항목을 간접편익으로 고려함으로써 홍수로 인한 교통두절피해를 정량적으로 계량할 수 있었으며, 실질적으로 편익에 영향이 가장 큰 편익가치(재화가치, 시간가치)에 대한 연구가 계속적으로 수반된다면 이후의 다른 치수사업 경제성분석시에 효과적인 분석이 이뤄질 것으로 판단된다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.335-336
• /
• 2008

최근 ITS(Intelligent Transportation Systems)의 보급으로 개인의 기-종점 간 통행시간에 많은 비용절감을 가져왔다. 지금까지의 주요 최단경로알고리즘은 네트워크의 기-종점(Origin-Destination) 거리 간 최단 통행시간을 고려하여 연구되어 왔다. 하지만, 최근 대두되는 고유가 시대의 진입과 더불어 환경에 대한 인식이 높아짐에 따라 기-종점 간 통행시간만을 고려하던 기존의 방법들에서 벗어나 추가적인 요인들의 고려 필요성이 증대되고 있다. 따라서 본 연구에서는 지리정보시스템을 이용한 환경오염을 최소화하는 친환경 최단경로 탐색방법 개발을 제안하고자 한다. 이를 위하여 3D 좌표정보 도로를 활용하여, 도로구배 조건에 따른 배출가스의 증감율을 환경오염편익으로 구분하고, 이를 사회적비용으로 환산하여, 경로탐색의 추가적인 요소로 반영하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.461-465
• /
• 2010

The objective of this study is to calculate road user costs that caused by the expansion work of metropolitan arterial highway and to analyze the costs that affect economic feasibility evaluation. "Taerung~Guri IC" section of Bukbu Expressway was selected as a case study. As a result, it shows that these costs could be a factor for determining economic feasibility for some projects. However, decreased capacity and free-flow speed are seriously different as period, type, length and traffic volume of work zones. These factors that decrease traffic capacity and free-flow speed should be deeply researched in the future.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.197-205
• /
• 2006

The study suggested a demand forecasting method which explicitly reflects transfer between various transport modes especially related light rail transit project with multi-modal transit system. The suggested method classifies several groups depending on characteristic of trips and applies different demand model for each group to explain travel pattern more realistically More specifically. the trips was classified by trips within the LRT route, trips between inside and outside of the LRT route. and through trips via the LRT route. The study also suggested a evaluation measurement of time saving due to the LRT construction, which are consistent along with the do-case and the do-nothing-case even though some mode shift could be happen after introducing the LRT.

• Journal of Korea Port Economic Association
• /
• v.33 no.3
• /
• pp.17-34
• /
• 2017

This study aims to analyze the freight transport demand and benefit for the introduction of an automated freight transport system focusing on the Global Industry and Logistics City (GILC) in Busan. In pursuit of this aim, four alternatives were calculated - using the freight volume estimating methods and included, the number of businesses, the number of employees set up, future estimated cargo volume, and switched volume from other transport modes into the GILC. Economic benefits were analyzed against social benefits and costs accordingly. The result of the freight transport demand forecast found, the cargo volume of "Alternative 2-1" to be the most advantageous, applying the number of employee unit method and proportion of employees in Gangseo-gu, Busan. In addition to the conventional analysis of direct benefit items (reduction of transport time, traffic accidents and environmental costs), this study also considered additional benefit items (congestion costs savings, and road maintenance costs in terms of opportunity cost). It also considered advanced value for money research in guidance on rail appraisal of U.K, Federal Transport Infrastructure Plan 2003 of Germany, and RailDec of the United States. The study aims to further contribute to estimating minimum cargo transport demands and assess the economic feasibility of the introduction of new intermodal automated freight transport systems in the future.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.288-298
• /
• 2017

The system of high-speed and conventional railway vehicles is diversified, and significant technological development in performance has been achieved. This study analyzed the modal change characteristics; furthermore, it estimated the value of travel time by improving the travel time and cost for the passenger's perception of railway. In this study, we formulate a mode choice model for passengers and compare it with the mixed logit model which reflects individual taste variation. In addition, the validity of the analysis is presented through an estimation the value of travel time using the derived model. For this purpose, a stated preference survey was conducted with 510 people using public transportation. The benefits of time-saving can be accurately determined by estimating the value of time spent on the railway. Appropriate fares for public transportation can also be estimated.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.59-70
• /
• 2012

The relative importance of leisure trip has been increased after adopting the five-day workweek system and considering the higher income level. Thus, the value of travel time for intercity leisure trips should be estimated to conduct a reasonable benefit/cost analysis for railway construction projects. In this paper, the value of travel time was estimated separately for each trip purpose such as business, leisure, and other non-business than leisure. The estimated values of leisure travel time ranged from 5,310 to 14,185 (won/hr) by altering travel mode, and were increased by 42-107% when comparing with those of non-business travel time. Besides, how to apply the value of intercity leisure travel time for B/C analysis of railway projects was suggested. For the construction case of a railway connecting Chuncheon and Sokcho, the estimated benefit was increased by 2.3%.