• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.285-293
• /
• 2020

In this paper, to improve Synthetic Aperture Radar (SAR) image quality, the effect of time synchronization error in the EGI/IMU (Embedded GPS/INS, Inertial Measurement Unit) integrated system is analyzed and state augmentation is applied to compensate it. EGI/IMU integrated system is widely used as a SAR motion measurement algorithm, which consists of EGI mounted to obtain the trajectory and IMU mounted on the SAR antenna. In an EGI/IMU integrated system, a time synchronization error occurs when the clocks of the sensors are not synchronized. Analysis of the effect of time synchronization error on navigation solutions and SAR images confirmed that the time synchronization error deteriorates SAR image quality. The state augmentation is applied to compensate for this and as a result, the SAR image quality does not decrease. In addition, by analyzing the performance and the observability of the time synchronization error according to the maneuver, it was confirmed that the time-variant maneuver such as rotational motion is necessary to estimate the time synchronization error adequately. In order to reduce the influence of the time synchronization error on the SAR image, the time synchronization error must be compensated by performing maneuver changing over time such as a rotation before SAR operation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.189-189
• /
• 2004

본 논문은 CNC 밀링머신을 이용한 절삭가공 등 2축시스템의 위치제어 시스템을 대상으로 한다. 기존의 제어방식은 크게 독립축제어와 상호결합제어로 분류할 수 있다. 독립축제어는 두 축의 통합된 운동을 각각의 독립된 축에 대한 추적제어를 수행하여 원하는 공구경로의 위치 정밀성을 향상시키고자 하는 것이고, 상호결합제어는 지령경로에 대한 추적성능보다는 현재의 윤곽오차를 감소시키는 방향으로 제어입력을 인가하여 가공윤곽의 오차를 감소시키는데 주목적이 있다. 또한 최근의 작업공정의 고속화 경향은 윤곽오차를 감소시키면서도 추적성능이 우수한 제어방식을 요구하고 있다.(중략)

• Journal of Advanced Navigation Technology
• /
• v.2 no.2
• /
• pp.75-83
• /
• 1998

This paper presents a low cost and high accuracy integrated Global Positioning System (GPS)/dead reckoning (DR) system. The integrated GPS/DR system is capable of providing highly accurate position data in real-time or in post processing. Based on the analysis of the main error source affecting the DR measurements, an eight-state mathematical model for the integrated system has been developed to represent these errors. This eight-state model has been used to build a nonlinear filter for the estimation of the state vector at every epoch when DR measurements are available. The accuracy of the system has been evaluated using 1Hz DR measurements and 3Hz continuous GPS position estimates. Through numerical simulation the system performance during periods with GPS outage has been investigated by comparing two different noise models. While one model is the position estimation filter containing a single noise model, the other filter includes two-level noise model. The simulation results have shown that the estimation filter containing two-level noise model for computing the position error of the integrated GPS/DR system yields better performance than that the filter including the single-level noise model does.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.171-178
• /
• 2008

Galileo is the Europe's global navigation satellite system corresponding to the GPS. The GIOVE-A test experiment has been finished and the second test satellite GIOVE-B will be launched soon. The integration of GPS and Galileo lead an increase of visible satellite number. We can obtain an improved navigation performance in signal blocked area such as urban or forest. GPS and Galileo have each time-coordinate system and use the different error model to calculate the navigation solution. In this paper, we studied on GPS and Galileo channel error model and time-coordinate system. Using this result, we implement the integrated navigation algorithm. In simulation, we analyzed the navigation error caused by time and coordinate disagreement and verified performance of integrated navigation algorithm in terms of visible satellite number, DOP(Dilution of Pression) and position error.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.220-227
• /
• 2018

The most widely used method for constructing an inertial navigation system (INS)/global navigation satellite system (GNSS) coupling system is to construct an integrated navigation system using a Kalman filter. However, depending on the trajectory, non-observable state variables may be generated. In this case, the state variables are not estimated. To solve this problem, a integrated navigation system is constructed and then an observability analysis is performed. In this paper, a 24th order position-matched Kalman filter is defined to design an INS/GNSS integrated navigation system for vehicles moving with a large pitch angle change. To verify the appropriateness of the error state variables applied to the Kalman filter, an observability analysis was performed. The trajectory was divided into five segments, and the piece-wise constant system (PWCS) was assumed for each segment, and the results were analytically analyzed. The analytical results and the simulation results confirm that the error state parameters of the Kalman filter are well-designed to the estimation side.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2004

The INS(Inertial Navigation System) provides high rate position, velocity and attitude data with good short-term stability while the GPS(Global Position System) provides position and velocity data with long-term stability. By integrating the INS with GPS, a navigation system can be achieved to Provide highly accurate navigation Performance. For the best performance, time synchronization of GPS and INS data is very important in GPS/INS integrated system But, it is impossible to synchronize them exactly due to the communication and computation time-delay. In this paper, to reduce the error caused by the measurement time-delay in GPS/INS integrated systems, error compensation methods using separate bias Kalman filter are suggested for both the loosely-coupled and the tightly-coupled GPS/INS integration systems. Linearized error models for the position and velocity matching GPS/INS integrated systems are Int derived by linearizing with respect to its time-delay and augmenting the delay-state into the conventional state equations for each case. And then separate bias Kalman Inter is introduced to estimate the time-delay during only initial navigation stage. The simulation results show that the present method is effective enough resulting in considerably less position error.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.1-3
• /
• 2010

수중 무인항체(Autonomous Underwater Vehicle, AUV)를 고정밀, 고위험 임무수행 분야에 이용하기 위해서는 연속적이고 정확한 항법정보를 제공하는 기술이 반드시 필요하다. 특히, 최근에는 항공분야에서 국내외적으로 연속적이고 정확한 항법정보를 제공하기 위하여 여러 가지 센서를 결합한 통합 항법시스템에 관한 연구가 활발하며, GPS나 음향장치를 관성센서와 통합하는 방법이 대표적이다. 하지만 수중 무인항체에 경우는 해수면 노출로 인한 탐사시간 장기화와 음향장치 설치 및 회수의 한계로 인하여 GPS나 음향장치 이외에 센서를 이용한 통합 항법시스템의 필요성이 커지고 있다. 본 논문에서는 자율성이 높으면서, 적은 비용으로 설치가 가능한 영상센서를 이용하여 항법성능을 효과적으로 증대시키는 Vision/INS 통합 항법을 제안한다. 제안한 통합 항법알고리즘은 외부표정요소 직접결정기법을 이용하여 영상 데이터로부터 항체의 위치와 자세를 추정하고, 추정된 결과를 INS의 추정치와 비교한다. 그리고 추정한 위치와 자세오차를 입력으로 칼만필터를 구동하도록 설계하였다. 모의실험을 통해 제안한 방법의 유효성을 확인하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.531-537
• /
• 2010

Real-time Aerial Monitoring System performs the rapid mapping in an emergency situation so that the geoinformation could be constructed in near real time. In this system, the position and attitude information from GPS/INS integration algorithm is used to perform the aerial triangulation(AT) without GCPs. Therefore, if we obtain Exterior Orientation(EO) estimates from AT sequentially, EO are used as the measurements in the Kalman filter. In this study, we simulate the GPS/IMS/Image data for an UAV-based aerial monitoring system and compare the GPS/INS/AT with and without from AT. Comparative analysis showed that result from the GPS/INS/AT with EO update is more accurate than without the update. However, when the vehicle turns, the position error significantly increases which need more analysis in the future.

• Journal of Advanced Navigation Technology
• /
• v.23 no.3
• /
• pp.221-227
• /
• 2019

In this paper, interacting multiple model (IMM) filter was designed that guarantees a stable navigation performance even in the unstable satellite navigation position. In order to design IMM filter in INS / GPS integrated navigation system, sub filter of the IMM filter is defined as Kalman filter. In the IMM filter configuration, two subfilters are determined. Each Kalman filter defines the six-teenth state composed of position, velocity, attitude, and sensor error from the INS error equation and the states additionally derived in case of the coloured measurement noise. In order to verify the performance of the proposed filter, we compared the performance how the filter works in the presence of arbitrary error in GPS navigation solution. The Monte Carlo simulation was performed 100 times and the results were compared with the root mean square(RMS). The results show that the proposed method is stable against errors and show fast convergence.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.26.2-26.2
• /
• 2010

이 연구는 Ashen light 측정을 통해 전 지구 반사율을 구하는 통합적 광선 추적 모델을 구성하고 그 수치모사 성능을 검증하는데 목적을 두고 있다. 통합적 광선 추적 모델은 태양-지구-달 시스템에 대하여 태양 복사에너지의 광경로를 추적함으로써 최종적으로 저궤도 상에 존재하는 광학계에 도달하는 Ashen light과 moonshine의 조도를 수치 모사하는 기법이다. Ashen light은 구형의 태양에서 출발한 $1.626\times10^{26}W$의 에너지를 가지는 400nm에서 700nm 파장대역의 빛이 램버시안 특성을 지니는 구형의 지구에서 반사된 후 램버시안 특성을 가지는 구형의 달에서 재 반사되어 저궤도상의 광학계로 입사하는 빛이고, moonshine은 달에서 직접 반사되어 저궤도상의 광학계로 입사하는 빛이다. 통합적 광선 추적 수치 모사를 이용하여 구한 Ashen light과 moonshine의 조도는 1차 근사 해석적 방법을 이용한 계산 결과와 측정 오차 범위 이내의 오차를 보였다. 최종 연구 결과 Ashen light과 moonshine의 조도를 이용하여 구한 지구 반사율과 1차 근사 해석적 방법을 이용한 지구 반사율 계산의 결과가 유사함을 증명하였다.