• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1638-1643
• /
• 2003

A shay has designing on the structure of new radio repeater for maritime safety communications system with economical and practical useful, that purpose be capable to exceedingly minimum the accident of small ship in sea, that is system. As Receive the urgency frequency from the SSB transceiver in a small fishery that transmit to convert VHF transceiver frequency. Otherwise, the VHF transmitter frequency is converting to the SSB receiver frequency. It has modeling of the hi­directional relay system, that is proposing the methode m the capability to mutual urgency communication between a SSB transceiver ship and VHF transceiver ship by new maritime safety communications system.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.15-18
• /
• 2009

현재 ITU (International Telecommunications Union)에서는 4세대 무선 광대역 표준에 대한 제안을 모색하고 있다. 4세대 표준의 유력한 후보군인 LTE-Advanced와 IEEE 802.16m은 고속이용 환경에서도 안정적으로 통신할 수 있도록 상형링크 및 하향링크에 변조기법으로 OFDMA을 사용하고 있다. 또한 셀(Cell) 변두리 지역에서 통신용량을 늘리기 위에 중계단말기를 사용하려고 한다. 이에 따라서 OFDMA 중계 네트워크에 대한 관심이 높아자고 있다. 이에 본 논문은 단일 셀 환경에서 확장된 다중 셀 환경의 OFDMA 중계 네트워크에서 부반송파 및 전력 할당 기법용 제안한다. 제안된 기법에서는 채널정보를 인접 셀과 공유하여 셀 간 간섭을 줄이고 부반송파와 전력을 적응적으로 분배함으로서 각 수신단말기의 최소통신용량을 확보하고 네트워크 지속시간을 늘리는 것을 목적으로 한다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.8-15
• /
• 2009

Relay-assisted multi-input multi-output (MIMO) technique has become a promising candidate for next generation broadband wireless communications for high speed access. In this paper, we propose channel selective relay-based MIMO transmission system. The performance of relay-based system can be improved by using the subcarriers selectively based on the channel condition between relay and mobile station. Simulation results show that the proposed relay-based system considerably outperforms the conventional relay-based system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1061-1068
• /
• 2019

Cooperative networks transmit signals form the source node to the destination node via several relay node where the combining and demodulation of relay aided signals provide the benefit of performance enhancement and data rate increment. In general, a repetitive manner transmission scheme in which the received signal from the source node is amplified/re-generated and forward to the destination node is widely used. In this paper, we analyzed the performance of cooperative networks using the mixed transmission scheme. The conventional modulation scheme is used in the source-relay links, and space-time code is applied in the relay-destination links. To reduce the complexity of the overall system, we adopt differential modulation which bypasses channel state information. We analyze bit error rate (BER) of the proposed system by considering the number of relay nodes, and the performances depending on the strength of transmission signal in the source-relays and rely-destination links are compared. In addition, we also discuss the system performance with the signal strength and the number of relay nodes simultaneously.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1675-1686
• /
• 2011

We propose a spectrally efficient relaying scheme with multiple antennas for cellular networks which consist of base station (BS), relay station (RSs), and mobile stations (MSs). In general, a BS has more antennas than an RS or an MS. By using multiple antennas, a BS can support another MS with the same frequency resource, where an RS transmits data to a specific MS. In this case, the MS receiving data form an RS also receives the interference form the BS because the BS also uses the same frequency resource at the same time. In this paper, we propose ing and pre-whitening techniques as a pre-coding scheme at the BS for reducing the interference at the MS receiving data from the RS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.31-37
• /
• 2009

In the two-way relay channel, the relay employ Amplify-and-Forward (AF) or Decode-and-Forward (DF) protocol, and broadcast the network-coded signal to both user. In the system, DF protocol provides maximum throughput at low signal to noise ratio(SNR). On the other hand, at high SNR, AF protocol provides maximum throughput. The paper propose active transmission scheme which employ Amplify-and-Forward or Decode-and-Forward protocol based on received SNR at the relay over Two-way relay channel. The optimal threshold is investigated numerically for switching the protocol. Through numerical results, we confirm that the proposed scheme outperforms conventional schemes over two-way relay channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8C
• /
• pp.605-612
• /
• 2008

This paper researches the estimating location using repeater effect adjustment method in CDMA based system. Repeaters are commonly used by commercial and amateur radio operators to extend signals in the radio frequency range from one receiver to another. The repeater signals are increasing arrival time from base station to mobile station. So if we calculates the mobile station using repeater signals, the estimating position error is increased. However nobody researched about adjusting repeater effects. This paper proposes repeater effect adjustment algorithm. For adjusting repeater effects, we make the triangle using mobile station, reference base station and neighbor base station, and then detect the repeater effects using the triangle characteristic. The proposed method system showed the improved performance in estimating parameters and locating positions by computer simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1438-1443
• /
• 2016

In this paper, we investigate the effect of multiple antennas at a relay node on the performance of physical-layer network coding (PNC) in the two-way relay channel (TWRC). We assume that two source nodes have a single antenna and the relay node has multiple antennas. We extend the conventional TWRC environment with a signle antenna at both relay and source nodes to the case of multiple antennas at the relay node. In particular, we consider two decoding strategies: separate decoding (SD) and direct decoding (DD). The SD decodes each packet from the two sources and performs the network coding with bit-wise exclusive OR (XOR) operation, while the DD decodes the network-coded packet from the two sources. Note that both decoding strategies are based on log-likelihood ratio (LLR) computation. It is shown that the bit error rate (BER) performance becomes significantly improved as the number of antennas at the relay node.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1672-1678
• /
• 2022

In this paper, the relay antenna was designed in consideration of the performance of the 28GHz band 5G mobile communication relay horn antenna, such as radiation pattern and return loss. A horn array for 5G mobile communication repeater was designed by arranging the antenna elements in phase, and the performance was analyzed. Unlike conventional WCDMA (3G) and LTE (4G), in millimeter wave band communication, high path loss occurs between transmission and reception. In the design of a 5G millimeter wave horn antenna, antenna performance such as isolation and gain between antenna elements as well as gain and bandwidth of the antenna must be additionally considered. The antenna gain of the single horn antenna (1×1) and the array horn antenna (2×4) in the 28GHz band is about 10.44d Bi and 19.58dBi, respectively, and the return loss is designed to be less than -18dB. It has proven its validity and has been shown to be suitable for application to 5G mobile communication relay system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1854-1860
• /
• 2014

In this paper, the energy saving on mobile communication repeater is studied. DB(Dual Band) small repeater, which is currently used in the field for indoor coverage, is adopted as a test unit. For reducing the power consumption, PFC (Power Factor Correction) is included on SMPS (Switching Mode Power Supply) of the DB small repeater. The test results show that approximately 38.9% of the power consumption is reduced comparing with the repeater without PFC. It means that approximately 230.43kWh per unit can be saved annually.